Carver Bimini Top Hold-Down Straps 62048 | Set of 4
Carver Bimini Top Hold-Down Straps 62048 | Set of 4 — Product description
Bimini top lifting at speed or flapping at the dock? This Carver set is the fix. You get four 48-inch polypropylene hold-down straps, each with a single snap-hook, so you can clip in, pull the top down tight, and get back on the water. It's a five-minute swap with no tools.
If your bimini top won't sit tight, the hold-down straps are usually the culprit. Webbing stretches, snaps corrode, and before long your top is lifting at speed or flapping at the dock. This Carver set gets you back to a top that stays put.
You get four straps in the set. Each one runs 48 inches long and 1 inch wide, made from black polypropylene webbing that shrugs off sun and salt spray. On the end of every strap is a single snap-hook, so you clip in, pull the top down snug, and you're done. No tools, no fuss.
These are the straps that run from the bimini frame down to the deck fittings on your boat, holding the top against wind load when you're underway. When they're worn out, the whole top gets sloppy. A fresh set brings the tension back so the canvas holds its shape and doesn't chafe against the frame.
Polypropylene is the right material for this job. It doesn't soak up water and get heavy, it stands up to UV better than cheap nylon, and it holds a fixed length without creeping. Carver has been building marine canvas and hardware for over 30 years, so these straps are cut and stitched to hold up to a full season on the water.
Fit is straightforward. If your current straps are the common 1-inch webbing style with a snap-hook, these drop right in. The 48-inch length gives you room to reach most standard deck-mount points, and you can adjust where you set the hook. First-time bimini owner or someone who's rigged a dozen tops, either way this is a quick swap.
One honest note. This set is the straps only. You'll reuse your existing deck eyes or snap studs, so check that those are in good shape before you order. If the fittings on your deck are worn too, sort those out at the same time and you'll have a top that holds like new.
Key Features
- Set of four straps, enough to secure a standard bimini top in one purchase
- 48-inch length per strap gives reach to most deck-mount fittings
- 1-inch wide polypropylene webbing resists UV, salt, and water absorption
- Single snap-hook on each strap for quick, tool-free attachment
- Black finish blends with most bimini and canvas colors
- Genuine Carver replacement part 62048, cut and stitched for marine use
Why Buy from NVN Marine
- Authorized Carver by Covercraft reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Replacement Hold-Down Strap For Bimini Top; 48 Inch Length x 1 Inch Width; Black; Polypropylene; With Single Snap-Hook; Set Of 4 |
|---|---|
| Brand | Carver by Covercraft |
| Manufacturer Part Number | 62048 |
| UPC | 813095022587 |
| Length | 48 Inches |
| Width | 1 Inch |
| Color | Black |
| Material | Polypropylene |
| Hardware | Single Snap-Hook |
| Quantity | Set of 4 |
| Application | Bimini Top Hold-Down |
Frequently asked questions
How many straps come in the set?
Four. This is a set of four hold-down straps, which covers a standard bimini top in one purchase.
How long and wide are the straps?
Each strap is 48 inches long and 1 inch wide. The length gives you room to reach most standard deck-mount points.
How do they attach?
Each strap has a single snap-hook on the end. You clip it to your deck-mounted eye or fitting, pull the top down snug, and you're set. No tools needed.
What are the straps made of?
Black polypropylene webbing. It doesn't soak up water, holds a fixed length without creeping, and stands up to sun and salt.
Will these fit my bimini top?
If your current straps are the common 1-inch webbing style with a snap-hook, these drop right in. You can adjust where you set the hook to dial in the tension.
Do these include the deck fittings?
No, this set is the straps only. You'll reuse your existing deck eyes or snap studs, so check that those are in good shape before you order.
