{"product_id":"carver-bimini-top-hold-down-straps-60-in-62060","title":"Carver Bimini Top Hold-Down Straps 60 in | 62060","description":"\u003cp class=\"nvn-hero\"\u003eIf your bimini top has started flapping or you've lost a strap over the side, this is the fix. Genuine Carver replacement hold-down straps, 60 inches of black polypropylene webbing with a snap-hook on the end, four to a pack. Enough to re-do the front and rear tie-downs on both sides and keep your top locked down where it belongs.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eBimini top straps are the little parts that do a big job. They're what keep your top from flapping, lifting, or worse, letting go when you're running at speed. This is the genuine Carver replacement set: 60 inches long, an inch wide, four straps to a pack. If your old hold-downs are sun-rotted, frayed at the hook, or you've lost one over the side, this set gets you squared away before your next trip out.\u003c\/p\u003e\n\u003cp\u003eEach strap is black polypropylene webbing with a single snap-hook on the end. Polypropylene is the right call for a boat. It shrugs off saltwater, doesn't soak up water and get heavy, and it stands up to UV better than a lot of the cheaper webbing you'll find. The 60-inch length gives you plenty of reach from the top's bows down to your deck fittings, and there's room to trim and re-sew if your boat runs shorter.\u003c\/p\u003e\n\u003cp\u003eThe snap-hook clips straight onto your existing deck eyes or pad eyes. No tools, no drilling. If you've already got the eye hardware mounted, this is a five-minute swap. Pull the old strap off, clip the new one on, tension it down, and you're done. Four straps handles a standard top with a hold-down front and rear on each side.\u003c\/p\u003e\n\u003cp\u003eA couple of things worth knowing before you order. This is the hold-down webbing only, not a full bimini top and not the frame. It's the tie-down strap that anchors an already-mounted top to your deck. And it ends in a snap-hook, so if your top uses a different attachment, like a jaw slide or a sewn webbing loop, check your hardware and measure first.\u003c\/p\u003e\n\u003cp\u003eCarver's been building boat covers and tops for over 30 years, and it's the small wear parts like these where that experience shows. Do yourself a favor and keep a spare set in the console. The day a strap lets go is never a convenient one.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e60-inch length by 1-inch width, enough reach to run from the bimini bows down to most deck fittings\u003c\/li\u003e\n  \u003cli\u003eBlack polypropylene webbing, resists saltwater and UV without soaking up water or getting heavy\u003c\/li\u003e\n  \u003cli\u003eSingle snap-hook end clips to existing deck eyes or pad eyes, no tools or drilling needed\u003c\/li\u003e\n  \u003cli\u003eSet of four straps covers front and rear hold-downs on both sides of a standard top\u003c\/li\u003e\n  \u003cli\u003eGenuine Carver replacement part, matched to Carver bimini tops\u003c\/li\u003e\n  \u003cli\u003eDirect swap for worn, faded, or lost original hold-down straps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Carver by Covercraft reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's in the set?\u003c\/summary\u003e\n    \u003cp\u003eFour black polypropylene hold-down straps, each 60 inches long by 1 inch wide, each with a single snap-hook. That's enough for front and rear hold-downs on both sides of a standard top.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill these fit my bimini top?\u003c\/summary\u003e\n    \u003cp\u003eThey're genuine Carver replacement hold-down straps and clip to standard deck eyes with the snap-hook. If your top uses a different attachment, like a jaw slide or a sewn loop, check your hardware before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need tools to install them?\u003c\/summary\u003e\n    \u003cp\u003eNo. The snap-hook clips onto your existing deck eye or pad eye. Pull the old strap off, clip the new one on, and tension it down.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the straps made of?\u003c\/summary\u003e\n    \u003cp\u003ePolypropylene webbing. It resists saltwater and UV and doesn't absorb water, so it won't get heavy or mildew the way some webbing does.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a complete bimini top?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is the hold-down strap set only, the webbing that anchors an already-mounted top to the deck. It isn't the top or the frame.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre they long enough for my boat?\u003c\/summary\u003e\n    \u003cp\u003eAt 60 inches each they reach from the bimini bows to most deck fittings. If your boat runs shorter, you can trim and re-sew the strap to length.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eReplacement Hold-Down Strap For Bimini Top; 60 Inch Length x 1 Inch Width; Black; Polypropylene; With Single Snap-Hook; Set Of 4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCarver by Covercraft\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e62060\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e813095022525\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e60 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e1 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePolypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHardware\u003c\/th\u003e\n\u003ctd\u003eSingle Snap-Hook\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eBimini top hold-down \/ tie-down\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's in the set?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Four black polypropylene hold-down straps, each 60 inches long by 1 inch wide, each with a single snap-hook. That's enough for front and rear hold-downs on both sides of a standard top.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will these fit my bimini top?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"They're genuine Carver replacement hold-down straps and clip to standard deck eyes with the snap-hook. If your top uses a different attachment, like a jaw slide or a sewn loop, check your hardware before ordering.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need tools to install them?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The snap-hook clips onto your existing deck eye or pad eye. Pull the old strap off, clip the new one on, and tension it down.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the straps made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Polypropylene webbing. It resists saltwater and UV and doesn't absorb water, so it won't get heavy or mildew the way some webbing does.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a complete bimini top?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This is the hold-down strap set only, the webbing that anchors an already-mounted top to the deck. It isn't the top or the frame.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are they long enough for my boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"At 60 inches each they reach from the bimini bows to most deck fittings. If your boat runs shorter, you can trim and re-sew the strap to length.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Carver by Covercraft","offers":[{"title":"Default Title","offer_id":45074524995677,"sku":"2009481","price":35.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_eabe438a-0238-449a-8d41-cf3cb687d680.jpg?v=1789808231","url":"https:\/\/nvnmarine.com\/products\/carver-bimini-top-hold-down-straps-60-in-62060","provider":"NVN Marine","version":"1.0","type":"link"}