{"product_id":"carver-71018f-10-center-console-bay-boat-cover","title":"Carver 71018F-10 Styled-to-Fit Cover for Center Console Bay Boats","description":"\u003cp class=\"nvn-hero\"\u003eThe Carver 71018F-10 is a styled-to-fit cover built for center console bay boats with a shallow draft hull, sized for a center line up to 18 feet 6 inches and a beam up to 94 inches. Poly-Flex II marine polyester, an attached motor cover, and heavy-duty straps keep your boat sealed up through storage, mooring, and light trailering.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you run a center console bay boat and you're tired of watching the sun and rain beat up your rigging, the Carver 71018F-10 is built for exactly your kind of boat. It's a styled-to-fit cover cut for center console bay-style fishing boats with a shallow draft hull, sized for a center line length up to 18 feet 6 inches and a beam up to 94 inches. Carver calls this the CCB-18 pattern, and it drapes over the console the way a good cover should, not like a flat tarp you fight with every time.\u003c\/p\u003e\n\u003cp\u003eThe fabric is Carver's Poly-Flex II, a marine-grade polyester that's water repellent, UV resistant, and treated to fight mildew. That combination is what you want for a boat that lives outside. The water repellent finish sheds rain and morning dew instead of soaking through. The UV treatment slows the fading and fabric breakdown that kills cheap covers after a season or two. And the mildew resistance matters a lot on a boat that traps humidity down under the console. It comes in haze gray, a neutral color that hides dust and doesn't telegraph every scuff.\u003c\/p\u003e\n\u003cp\u003eThis one is styled-to-fit, which means it's patterned for the shape of a center console bay boat rather than sewn to your exact hull. If your boat falls inside the size window, an 18 foot 6 inch center line and a beam of 94 inches or less, it's going to fit well. Bay boats with shallow draft hulls sit a little different than deep-V offshore boats, and this cover is cut with that lower freeboard and the center console layout in mind. Anglers who keep their boat on a lift, in a yard, or on a trailer between trips are the target here.\u003c\/p\u003e\n\u003cp\u003eWhat it's not is a poling-platform cover. If your bay boat is rigged with a poling platform aft, you'll want a pattern made to clear that platform, because this one is cut for a straight center console layout without it. Same goes for boats with a hardtop or tower. Measure your center line length bow to stern and your widest beam before you order. And if you're between sizes, size up rather than down. A cover that's a hair loose is far easier to live with than one that won't reach the rub rail.\u003c\/p\u003e\n\u003cp\u003eCarver builds in the details that actually matter for a working cover. There's an attached motor cover, so your outboard stays sealed up along with the rest of the boat, no separate hood to buy or lose. And it ships with heavy-duty tie-down straps to cinch the whole thing down tight. That's the difference between a cover that stays put in a blow and one you find in your neighbor's yard after the first storm.\u003c\/p\u003e\n\u003cp\u003eThink of this as a storage and mooring cover first. It's excellent for the off-season, for keeping leaves and pollen and bird mess off the boat between weekends, and for protecting the interior from months of sun. A couple of tips from experience. If you're leaving it on for a long stretch, add a support pole in the cockpit so rain drains off instead of pooling in the middle. Standing water is the enemy of any cover. And let the boat dry fully before you cover it, or crack it for a little airflow, so moisture doesn't sit trapped underneath. For a quick run to the ramp and back, snug the straps down well. For long highway hauls, most folks add a few extra straps and a support pole to keep the fabric from flogging at speed.\u003c\/p\u003e\n\u003cp\u003eBottom line, if you've got an 18-and-a-half-foot center console bay boat and you want a proper cover that'll take real weather without falling apart, the 71018F-10 is a well-made choice. It's the kind of gear you buy once and mostly forget about, which is exactly what you want from a boat cover.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003ePoly-Flex II marine-grade polyester, water repellent with UV protection and mildew resistance for year-round outdoor cover\u003c\/li\u003e\n  \u003cli\u003eStyled-to-fit CCB-18 pattern cut for center console bay boats with a shallow draft hull, not a flat tarp\u003c\/li\u003e\n  \u003cli\u003eFits a center line length up to 18 feet 6 inches\u003c\/li\u003e\n  \u003cli\u003eHandles a beam width up to 94 inches without stretching the seams\u003c\/li\u003e\n  \u003cli\u003eAttached motor cover keeps your outboard sealed against weather, no separate hood needed\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty tie-down straps included to lock the cover down for storage and mooring\u003c\/li\u003e\n  \u003cli\u003eHaze gray color hides dust and holds up to long UV exposure\u003c\/li\u003e\n  \u003cli\u003eBuilt for storage, mooring, and light trailering duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Carver by Covercraft reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size boat does the 71018F-10 fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's cut for center console bay-style fishing boats with a shallow draft hull, up to an 18 foot 6 inch center line length and a beam width of 94 inches or less. Measure your boat bow to stern and at its widest beam before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the cover made of?\u003c\/summary\u003e\n    \u003cp\u003eCarver's Poly-Flex II, a marine-grade polyester. It's water repellent, UV resistant, and treated to resist mildew, so it's meant to live outdoors season after season.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with tie-down straps?\u003c\/summary\u003e\n    \u003cp\u003eYes. It ships with heavy-duty tie-down straps so you can cinch the cover down tight for storage, mooring, or a trip to the ramp.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it cover the outboard motor?\u003c\/summary\u003e\n    \u003cp\u003eYes. There's an attached motor cover built in, so your outboard stays protected along with the rest of the boat. You don't need a separate motor hood.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a custom fit for my exact boat?\u003c\/summary\u003e\n    \u003cp\u003eNo, it's styled-to-fit. That means it's patterned to the general shape of a center console bay boat within the listed size range rather than sewn to one specific hull. Within that window it fits well.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it work on a boat with a poling platform?\u003c\/summary\u003e\n    \u003cp\u003eThis pattern is cut for a straight center console layout without a poling platform. If your bay boat has a poling platform aft, you'll want a cover patterned to clear it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I trailer with this cover on?\u003c\/summary\u003e\n    \u003cp\u003eIt's built as a storage and mooring cover and handles light trailering fine when you snug the straps down well. For long highway hauls, add a few extra straps and a support pole so the fabric doesn't flog at speed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I keep water from pooling on top?\u003c\/summary\u003e\n    \u003cp\u003eAdd a support pole in the cockpit to create some pitch so rain runs off instead of collecting in the middle. Standing water is hard on any cover over time.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I avoid mildew during long storage?\u003c\/summary\u003e\n    \u003cp\u003eLet the boat dry fully before you cover it, and leave a little airflow underneath so moisture doesn't stay trapped. The fabric resists mildew, but ventilation still helps on a boat put away for months.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is it?\u003c\/summary\u003e\n    \u003cp\u003eHaze gray. It's a neutral shade that hides dust and doesn't show every scuff.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCarver 71018F-10 Styled-to-Fit Cover for Center Console Bay Boats\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCarver by Covercraft\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e71018F-10\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e194092550243\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eCCB-18\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eHaze Gray\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePoly-Flex II Marine Grade Polyester\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBoat Style\u003c\/th\u003e\n\u003ctd\u003eCenter Console Bay Style Fishing Boat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHull Type\u003c\/th\u003e\n\u003ctd\u003eShallow Draft Hull\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits Center Line Length\u003c\/th\u003e\n\u003ctd\u003e18 ft 6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum Beam Width\u003c\/th\u003e\n\u003ctd\u003e94 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFabric Protection\u003c\/th\u003e\n\u003ctd\u003eWater Repellent, UV Protection, Mildew Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTie-Down Straps\u003c\/th\u003e\n\u003ctd\u003eHeavy-Duty, Included\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMotor Cover\u003c\/th\u003e\n\u003ctd\u003eAttached, Included\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size boat does the 71018F-10 fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's cut for center console bay-style fishing boats with a shallow draft hull, up to an 18 foot 6 inch center line length and a beam width of 94 inches or less. Measure your boat bow to stern and at its widest beam before ordering.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the cover made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Carver's Poly-Flex II, a marine-grade polyester. It's water repellent, UV resistant, and treated to resist mildew, so it's meant to live outdoors season after season.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with tie-down straps?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It ships with heavy-duty tie-down straps so you can cinch the cover down tight for storage, mooring, or a trip to the ramp.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it cover the outboard motor?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. There's an attached motor cover built in, so your outboard stays protected along with the rest of the boat. You don't need a separate motor hood.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a custom fit for my exact boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, it's styled-to-fit. That means it's patterned to the general shape of a center console bay boat within the listed size range rather than sewn to one specific hull. Within that window it fits well.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it work on a boat with a poling platform?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This pattern is cut for a straight center console layout without a poling platform. If your bay boat has a poling platform aft, you'll want a cover patterned to clear it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I trailer with this cover on?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built as a storage and mooring cover and handles light trailering fine when you snug the straps down well. For long highway hauls, add a few extra straps and a support pole so the fabric doesn't flog at speed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I keep water from pooling on top?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Add a support pole in the cockpit to create some pitch so rain runs off instead of collecting in the middle. Standing water is hard on any cover over time.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I avoid mildew during long storage?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Let the boat dry fully before you cover it, and leave a little airflow underneath so moisture doesn't stay trapped. The fabric resists mildew, but ventilation still helps on a boat put away for months.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Haze gray. It's a neutral shade that hides dust and doesn't show every scuff.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Carver by Covercraft","offers":[{"title":"Default Title","offer_id":45000429437021,"sku":"2007883","price":212.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_6cb8addb-8109-4488-bbf5-bf26f198c2fa.jpg?v=1788743715","url":"https:\/\/nvnmarine.com\/products\/carver-71018f-10-center-console-bay-boat-cover","provider":"NVN Marine","version":"1.0","type":"link"}