Carver 70007S-11 350 HP Outboard Motor Cover Haze Gray
Carver 70007S-11 350 HP Outboard Motor Cover Haze Gray — Product description
This is Carver's Sun-Dura outboard motor cover, cut to fit a 350 HP outboard and keep it protected between trips. The Haze Gray polyester sheds water, blocks UV, and resists mildew, so your powerhead stays clean sitting at the dock or on the trailer. Made in the USA by a company that's been sewing marine covers for over 30 years.
Your outboard is one of the most expensive things on the boat, so it makes sense to keep it covered when you're not running it. This is Carver's Sun-Dura motor cover, sized to fit a 350 HP outboard. It slips over the cowling and drapes down to keep sun, rain, dust, and bird mess off the powerhead while the boat sits at the dock, on the lift, or on the trailer between weekends.
The fabric is what does the work here. Sun-Dura is a solution-dyed polyester, which means the color goes all the way through the fiber instead of sitting on the surface. That's why it holds up to season after season of hard sun without fading out to a chalky gray. It's water repellent, so a passing rain shower beads up and runs off instead of soaking through to your motor. And it's treated to resist mildew, which matters if you keep the boat somewhere humid or shrink-wrapped over winter.
This cover is cut for a motor roughly 41 inches long, 26 inches wide, and 40 inches tall, which is the envelope a typical 350 HP outboard falls into. Before you order, it's worth measuring your own powerhead from the top of the cowling down to where you want the cover to end. A cover that fits close stays put in the wind and doesn't flap itself loose on the highway.
Carver's been sewing marine covers in the USA for over 30 years, and it shows in the details. The Haze Gray color is neutral enough to look right on just about any hull. And because it's a dedicated motor cover and not a full boat cover, it's quick to pull on and off, so there's no excuse to leave the motor exposed just because you're in a hurry.
Good fit matters most on a cover like this. If your outboard is a different size, measure first and check our other Carver motor cover sizes so you don't end up with something too tight or too baggy.
Key Features
- Sun-Dura solution-dyed polyester resists fading, so the color holds up through years of sun instead of chalking out
- Water-repellent finish sheds rain and spray, keeping the powerhead dry between trips
- Treated to resist mildew, a real plus for humid storage or winter shrink-wrap
- UV-stable construction protects the motor's cowling and finish from sun damage
- Sized to fit a 350 HP outboard, roughly 41 in long by 26 in wide by 40 in tall
- Haze Gray color stays neutral and works with just about any hull
- Made in the USA by Carver, with over 30 years of marine cover experience
Why Buy from NVN Marine
- Authorized Carver by Covercraft reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Carver Sun-Dura 350 HP Outboard Motor Cover, Haze Gray |
|---|---|
| Brand | Carver by Covercraft |
| Manufacturer Part Number | 70007S-11 |
| UPC | 194092564356 |
| Fits Motor | 350 HP Outboard |
| Cover Dimensions (L x W x H) | 41 in x 26 in x 40 in |
| Color | Haze Gray |
| Material | Sun-Dura Polyester |
| Water Repellent | Yes |
| UV Protection | Yes |
| Mildew Resistant | Yes |
| Country of Origin | United States |
Frequently asked questions
What size motor does this cover fit?
It's cut for a 350 HP outboard, with a fit envelope of about 41 inches long, 26 wide, and 40 tall. Measure your own powerhead before ordering to make sure it falls in that range.
What is the cover made of?
Sun-Dura polyester, a solution-dyed fabric that's water repellent, UV resistant, and treated to resist mildew.
Will it fade in the sun?
Sun-Dura is solution-dyed, so the color runs through the fiber instead of sitting on the surface. That's what keeps it from chalking or fading the way surface-dyed fabrics do.
Can I leave it on while trailering?
A snug cover rides fine on the trailer, but check that it fits close and add a strap or tie so it doesn't flap loose at highway speed. A loose cover can chafe and tear.
Is this a full boat cover or just the motor?
Just the outboard motor. It slips over the cowling to protect the powerhead, and it's quick to pull on and off.
What color is it?
Haze Gray, a neutral tone that looks right on most hulls.
