{"product_id":"camco-eaz-lift-48093-round-spring-bars-1-000-lb","title":"Camco Eaz-Lift 48093 Replacement Round Spring Bars, 1,000 lb","description":"\u003cp class=\"nvn-hero\"\u003eThe Camco Eaz-Lift 48093 gives you a fresh set of round spring bars for your weight distribution hitch, rated for 1,000 pounds of tongue weight. It's the hitch bar only, so if your head assembly is still in good shape and you just need to replace worn or bent bars, this is the kit that gets you back to a level, controlled tow.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eWhen you hook a loaded boat trailer or travel trailer to your tow vehicle, the tongue weight pushes down on the back of the truck. That squat lifts the front end, lightens your steering, and makes the whole rig feel loose. A weight distribution hitch fixes that. It uses spring bars to transfer some of that tongue load forward onto the truck's front axle and back onto the trailer axles. The Camco Eaz-Lift 48093 is the replacement round spring bar kit for that system, rated for 1,000 pounds of tongue weight.\u003c\/p\u003e\n\u003cp\u003eRead the name carefully. This is the hitch bar only. You're getting the round spring bars, not the whole head assembly, the shank, or the ball. So this kit is for you if your Eaz-Lift head is still solid and you just need new bars because the old ones are bent, rusted, or sagging. If you need the complete hitch, that's a different part. Buying just the bars saves you real money when the rest of your setup is fine.\u003c\/p\u003e\n\u003cp\u003eRound bars sit in the head sockets and hook to your trailer frame with chains and lift brackets. They flex under load, and that flex is what does the weight transfer. The round bar layout tucks the bars below the frame, which keeps them out of the way and makes hookup straightforward on most boat and utility trailers. Match the bar rating to your trailer's actual tongue weight and the setup does its job.\u003c\/p\u003e\n\u003cp\u003eThese bars are made for Eaz-Lift round bar hitch heads. If you're replacing a worn set, pull one of your old bars and match the length and the hook style before you order, and confirm your head is rated to the same 1,000 pound class. A matched head and bar pair is what lets the system spread the load evenly. Run bars that are too light for your head and rig and you won't get full weight transfer.\u003c\/p\u003e\n\u003cp\u003eThe 1,000 pound number is the tongue weight these bars are built to handle. That's the down force at the coupler, not the total trailer weight. As a rough guide, tongue weight usually runs 10 to 15 percent of loaded trailer weight. So a fully loaded trailer somewhere in the 7,000 to 10,000 pound range often lands near that 1,000 pound tongue figure. Weigh your rig loaded the way you actually tow it, fuel and gear included, and match the bars to that number.\u003c\/p\u003e\n\u003cp\u003eBeyond leveling, a properly set weight distribution hitch calms sway. When the load is balanced across all the axles, crosswinds and passing semis don't shove the trailer around as much. That matters on the highway with a tall travel trailer or a big boat on the back. The spring bars are the heart of that system, so keeping them in good shape is a safety thing, not just a comfort thing.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward if you've run a weight distribution hitch before. The bars drop into the head sockets and connect to the frame brackets. Torque everything to spec. Bars that aren't tensioned evenly can bind a little in tight turns, so take your time and set the chain links to the same height on both sides. On rough boat ramps and washboard roads, some folks add a rubber pad between the bar and the frame bracket to quiet down any clunk. These bars fit round tube trailer frames, so if your trailer has an unusual frame, check your bracket fitment before you order.\u003c\/p\u003e\n\u003cp\u003eIf you tow a heavier boat, a dual axle center console, a walkaround, or a loaded travel trailer, and your rig has been squatting or wandering, worn spring bars are a common cause. Fresh bars bring back the level stance and the steady steering you had when the setup was new. It's a straightforward fix, and it's a lot cheaper than replacing the whole hitch. Keep the bars greased at the contact points, store them dry, and they'll give you seasons of steady towing.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eRated for 1,000 lb tongue weight, sized for heavier boat and travel trailers\u003c\/li\u003e\n  \u003cli\u003eRound bar design tucks below the trailer frame for straightforward hookup\u003c\/li\u003e\n  \u003cli\u003eSold as the hitch bar only, so you replace worn bars without buying a whole new head\u003c\/li\u003e\n  \u003cli\u003eTransfers tongue load forward to the tow vehicle and back to the trailer axles for a level stance\u003c\/li\u003e\n  \u003cli\u003eHelps control trailer sway from crosswinds and passing traffic\u003c\/li\u003e\n  \u003cli\u003eFits round tube trailer frames using standard chain lift brackets\u003c\/li\u003e\n  \u003cli\u003eSpring steel bars flex under load to do the weight transfer\u003c\/li\u003e\n  \u003cli\u003eGenuine Camco Eaz-Lift replacement part, MPN 48093\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat comes in the Camco Eaz-Lift 48093 kit?\u003c\/summary\u003e\n    \u003cp\u003eYou get the replacement round spring bars for a weight distribution hitch, rated for 1,000 pounds of tongue weight. It's the hitch bar only, so the head assembly, shank, and ball aren't included.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the 1,000 pound rating mean?\u003c\/summary\u003e\n    \u003cp\u003eThat's the tongue weight the bars are built to handle, meaning the down force at the coupler, not the total trailer weight. Tongue weight usually runs about 10 to 15 percent of loaded trailer weight.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo these include the hitch head?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is the hitch bar only. If your Eaz-Lift head is still in good shape and you just need fresh bars, this is the kit. If you need the whole hitch, that's a separate part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the difference between round bar and trunnion styles?\u003c\/summary\u003e\n    \u003cp\u003eRound bars tuck below the trailer frame and hook up with chains and brackets, while trunnion bars slide into the sides of the head. The 48093 is the round bar style, so it's meant for round bar Eaz-Lift heads.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I run a weight distribution hitch without the spring bars?\u003c\/summary\u003e\n    \u003cp\u003eNo. The bars are what transfer the tongue load forward to the tow vehicle and back to the trailer axles. Without them you lose the leveling and the sway control the hitch is designed to give you.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I know if I need the 1,000 pound bars?\u003c\/summary\u003e\n    \u003cp\u003eWeigh your trailer loaded the way you actually tow it, then figure the tongue weight at roughly 10 to 15 percent of that. Match the bar rating to your tongue weight and to your hitch head's rating.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAny tips for a smooth install?\u003c\/summary\u003e\n    \u003cp\u003eTorque the connections to spec and set the chain links to the same height on both sides so the bars tension evenly and don't bind in turns. On rough ramps, a rubber pad between the bar and bracket quiets any clunk.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill these fit my trailer frame?\u003c\/summary\u003e\n    \u003cp\u003eThey're made for round tube trailer frames using standard chain lift brackets. If your trailer has an unusual frame, check your bracket fitment before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco Eaz-Lift 48093 Replacement Round Spring Bar Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Line\u003c\/th\u003e\n\u003ctd\u003eEaz-Lift\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e48093\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717480932\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch System\u003c\/th\u003e\n\u003ctd\u003eWeight Distribution\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBar Style\u003c\/th\u003e\n\u003ctd\u003eRound Bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTongue Weight Rating\u003c\/th\u003e\n\u003ctd\u003e1,000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eReplacement Bars Only (no hitch head)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSold As\u003c\/th\u003e\n\u003ctd\u003eSpring Bar Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSpring Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eKeystone Part Number\u003c\/th\u003e\n\u003ctd\u003eC1W48093\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What comes in the Camco Eaz-Lift 48093 kit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You get the replacement round spring bars for a weight distribution hitch, rated for 1,000 pounds of tongue weight. It's the hitch bar only, so the head assembly, shank, and ball aren't included.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the 1,000 pound rating mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"That's the tongue weight the bars are built to handle, meaning the down force at the coupler, not the total trailer weight. Tongue weight usually runs about 10 to 15 percent of loaded trailer weight.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do these include the hitch head?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This is the hitch bar only. If your Eaz-Lift head is still in good shape and you just need fresh bars, this is the kit. If you need the whole hitch, that's a separate part.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the difference between round bar and trunnion styles?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Round bars tuck below the trailer frame and hook up with chains and brackets, while trunnion bars slide into the sides of the head. The 48093 is the round bar style, so it's meant for round bar Eaz-Lift heads.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I run a weight distribution hitch without the spring bars?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The bars are what transfer the tongue load forward to the tow vehicle and back to the trailer axles. Without them you lose the leveling and the sway control the hitch is designed to give you.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I know if I need the 1,000 pound bars?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Weigh your trailer loaded the way you actually tow it, then figure the tongue weight at roughly 10 to 15 percent of that. Match the bar rating to your tongue weight and to your hitch head's rating.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Any tips for a smooth install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Torque the connections to spec and set the chain links to the same height on both sides so the bars tension evenly and don't bind in turns. On rough ramps, a rubber pad between the bar and bracket quiets any clunk.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will these fit my trailer frame?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"They're made for round tube trailer frames using standard chain lift brackets. If your trailer has an unusual frame, check your bracket fitment before ordering.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45059343777885,"sku":"2008420","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_424c1ec1-9f0a-44e1-85c6-7f33901d40cc.jpg?v=1789503743","url":"https:\/\/nvnmarine.com\/products\/camco-eaz-lift-48093-round-spring-bars-1-000-lb","provider":"NVN Marine","version":"1.0","type":"link"}