{"product_id":"camco-acculevel-rv-bubble-level-screw-on","title":"Camco AccuLevel RV Bubble Level | Screw-On","description":"\u003cp class=\"nvn-hero\"\u003eThe Camco AccuLevel is a simple screw-on bubble level that reads side-to-side and front-to-rear at the same time, so you can level your rig from one spot. Mount it on the A-frame or tongue, glance once, and know exactly which corner needs a block. It reads a full 360 degrees at a time.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Camco AccuLevel takes the guesswork out of setting up your rig. It's a single bubble level that reads side-to-side and front-to-rear at the same time, so one quick look tells you which way you're leaning and by how much. No walking around the coach with a torpedo level. No crawling under the trailer. You pull into the site, glance at the bubble, and you know exactly what needs to come up.\u003c\/p\u003e\n\u003cp\u003eHere's why that matters. A round bubble level reads a full 360 degrees at once. The bubble drifts toward the high corner, so you can see both axes in a single glance instead of checking one direction, then repeating for the other. That's the whole point of the AccuLevel. It's dead simple, and simple is what you want when you're tired, it's getting dark, and you just want the camper level so you can start dinner.\u003c\/p\u003e\n\u003cp\u003eThis version mounts with screws, so it stays put for good. We like putting one on the A-frame or tongue up front where you can see it from the driver's seat or while you spot from outside. A lot of folks run two, one reading side-to-side and another catching the rest. But because this one reads both directions, a single well-placed unit often does the job on its own. Pick a flat spot, make sure the rig is already sitting level when you install it, then drive the screws. Set it on a surface that isn't true and every reading after that will be off, so take the extra minute to get the mounting spot right.\u003c\/p\u003e\n\u003cp\u003eWhy fuss over level at all? A few reasons that actually bite you. An absorption fridge wants to sit close to level to cool properly, and running it off-kilter for long stretches can shorten its life. Off-level bunks make for a lousy night's sleep, with everybody rolling to one side of the bed. Doors and drawers swing open or won't latch right. And if your rig has slide-outs, they seat and seal far better on a level floor. Get the coach level first and the rest of the setup goes smoother.\u003c\/p\u003e\n\u003cp\u003ePair it with a set of leveling blocks or ramps and setup gets even faster. Read the bubble, spot the low side, and stack blocks under the low tires or drive the low side onto a ramp until the bubble centers. One mark off usually means you need to raise that side about an inch, so you can eyeball how many blocks to grab before you even step out. Then set your stabilizer jacks once you're level, not before.\u003c\/p\u003e\n\u003cp\u003eThe AccuLevel earns its keep on travel trailers, fifth wheels, truck campers, pop-ups, and motorhomes. Anywhere you park and need to know your attitude at a glance. And it's not only an RV tool. If you keep a boat on a trailer or in dry storage over the winter, a bubble level on the frame helps you set a slight bow-down angle so rain and melt drain off the cover instead of pooling. Same idea, same handy little gauge.\u003c\/p\u003e\n\u003cp\u003eA couple of honest notes. This is a screw-mount unit, so it's a permanent install, not something you'll move from rig to rig. Give the bubble a sanity check against a known-level surface when you first put it on, and you'll trust it for years. The housing lives out in the sun and weather up on the frame, so if your rig sits outside year-round, plan on it being a wear item eventually. For what it costs, that's an easy trade. You get level in seconds, every single time you set up.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eReads side-to-side and front-to-rear at the same time, so one glance tells you which corner to raise\u003c\/li\u003e\n  \u003cli\u003eRound bubble reads a full 360 degrees at once, no checking one axis and then the other\u003c\/li\u003e\n  \u003cli\u003eScrew-on mount holds the level permanently in place on the A-frame, tongue, or frame rail\u003c\/li\u003e\n  \u003cli\u003eSingle-unit design does the work of two separate levels on most rigs\u003c\/li\u003e\n  \u003cli\u003eFits travel trailers, fifth wheels, truck campers, pop-ups, and motorhomes\u003c\/li\u003e\n  \u003cli\u003eHandy for boat trailers and dry storage too, set the right drain angle under a cover\u003c\/li\u003e\n  \u003cli\u003eSimple bubble read means no batteries, no app, and nothing to fail at the campsite\u003c\/li\u003e\n  \u003cli\u003eCamco AccuLevel design, a trusted name in RV setup gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the AccuLevel read both side-to-side and front-to-rear?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's a single bubble level that shows both directions at once. The bubble drifts toward the high corner, so one look tells you which way the rig is leaning without checking each axis separately.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it mount?\u003c\/summary\u003e\n    \u003cp\u003eIt's a screw-on unit. You fasten it down with screws, which makes it a permanent, no-slip install that stays put trip after trip.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhere should I mount it on my RV?\u003c\/summary\u003e\n    \u003cp\u003eMost owners put it on the front A-frame or tongue where it's easy to see from the driver's seat or while spotting from outside. Pick a flat surface so the reading stays honest.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need to be level when I install it?\u003c\/summary\u003e\n    \u003cp\u003eYes. Mount it while the rig is already sitting level on a true surface. If you screw it to a spot that isn't level, every reading afterward will be off by that same amount.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the easiest way to level a travel trailer with this?\u003c\/summary\u003e\n    \u003cp\u003eRead the bubble first, spot the low side, then raise that side with leveling blocks or a ramp until the bubble centers. Set your stabilizer jacks only after you're level, not before.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I use leveling blocks with it?\u003c\/summary\u003e\n    \u003cp\u003eCheck the bubble and note the low side. As a rough rule, one mark off center means raise that side about an inch, so you can grab the right number of blocks before you even step out of the tow vehicle.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it need batteries or an app?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's a straight bubble level with nothing to power or pair. That's the appeal, it just works, and there's nothing to fail when you're set up at a remote site.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it work on a fifth wheel or truck camper?\u003c\/summary\u003e\n    \u003cp\u003eYes. It works on travel trailers, fifth wheels, truck campers, pop-ups, and motorhomes. Anywhere you park and want to know your attitude at a glance.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it on a boat trailer?\u003c\/summary\u003e\n    \u003cp\u003eYou can. Mounted on a trailer or storage frame, it helps you set a slight bow-down angle so water drains off the cover instead of pooling over the off-season.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many do I need?\u003c\/summary\u003e\n    \u003cp\u003eBecause this one reads both side-to-side and front-to-rear, a single well-placed unit is usually enough. Some owners still run two for redundancy or easier sightlines from different spots.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco AccuLevel RV Bubble Level, Side-to-Side and Front-to-Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e25563\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717255639\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Line\u003c\/th\u003e\n\u003ctd\u003eAccuLevel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLevel Type\u003c\/th\u003e\n\u003ctd\u003eBubble\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeveling Axes\u003c\/th\u003e\n\u003ctd\u003eSide-to-Side and Front-to-Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReading\u003c\/th\u003e\n\u003ctd\u003e360 degrees at once\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eScrew-On\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRV, trailer, and camper leveling\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003ePermanent screw mount\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the AccuLevel read both side-to-side and front-to-rear?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's a single bubble level that shows both directions at once. The bubble drifts toward the high corner, so one look tells you which way the rig is leaning without checking each axis separately.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a screw-on unit. You fasten it down with screws, which makes it a permanent, no-slip install that stays put trip after trip.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Where should I mount it on my RV?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Most owners put it on the front A-frame or tongue where it's easy to see from the driver's seat or while spotting from outside. Pick a flat surface so the reading stays honest.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need to be level when I install it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Mount it while the rig is already sitting level on a true surface. If you screw it to a spot that isn't level, every reading afterward will be off by that same amount.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the easiest way to level a travel trailer with this?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Read the bubble first, spot the low side, then raise that side with leveling blocks or a ramp until the bubble centers. Set your stabilizer jacks only after you're level, not before.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I use leveling blocks with it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Check the bubble and note the low side. As a rough rule, one mark off center means raise that side about an inch, so you can grab the right number of blocks before you even step out of the tow vehicle.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it need batteries or an app?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's a straight bubble level with nothing to power or pair. That's the appeal, it just works, and there's nothing to fail when you're set up at a remote site.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it work on a fifth wheel or truck camper?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It works on travel trailers, fifth wheels, truck campers, pop-ups, and motorhomes. Anywhere you park and want to know your attitude at a glance.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it on a boat trailer?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You can. Mounted on a trailer or storage frame, it helps you set a slight bow-down angle so water drains off the cover instead of pooling over the off-season.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many do I need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Because this one reads both side-to-side and front-to-rear, a single well-placed unit is usually enough. Some owners still run two for redundancy or easier sightlines from different spots.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45070562852957,"sku":"2009087","price":53.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_1ddee153-21de-484a-b312-654829dcfb58.jpg?v=1789705353","url":"https:\/\/nvnmarine.com\/products\/camco-acculevel-rv-bubble-level-screw-on","provider":"NVN Marine","version":"1.0","type":"link"}