{"product_id":"camco-59213-propane-adapter-acme-to-1lb-bottle-brass","title":"Camco 59213 Propane Adapter, ACME to 1lb Bottle, Brass","description":"\u003cp class=\"nvn-hero\"\u003eThe Camco 59213 is a solid brass adapter that lets a Type I ACME propane appliance run off a 1 pound disposable bottle. It's the fitting that ties Camco's Campfire connection kits, the 59103, 59123 and 59143, to a grab-and-go cylinder. No shut-off valve, just clean brass threads and a leak-free seal.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Camco 59213 is a small brass fitting that solves a specific problem. You've got a propane appliance built to run off a 20 or 30 pound tank through a Type I ACME connection, and you want to feed it from a 1 pound disposable bottle instead. This adapter bridges the two. It converts that Type I ACME connection over to a standard 1 inch-20 throwaway thread, the same thread you'll find on any 1 pound camping cylinder.\u003c\/p\u003e\n\u003cp\u003eCamco built this one specifically to pair with their Campfire propane connection kits, the 59103, 59123 and 59143. If you're running one of those kits to fuel a portable propane campfire or fire pit, the 59213 is the piece that lets you tap a 1 pound bottle for the job. Thread it onto the kit, snug it down, and you're feeding the flame from a cylinder you can pick up at any hardware store or campground camp store.\u003c\/p\u003e\n\u003cp\u003eIt's brass all the way through. That matters more than it sounds. Propane fittings live outdoors, get handled with cold hands, and take a beating every time you swap a bottle. Brass threads don't strip the way cheaper pot-metal or plastic fittings do, and they seal cleaner over dozens of connect-and-disconnect cycles. This is the kind of part you buy once and forget about.\u003c\/p\u003e\n\u003cp\u003eOne thing to know up front. The 59213 does not have its own shut-off valve. That's by design, not an oversight. You control the gas at the bottle valve or the tank valve upstream, so there's no extra valve on the adapter to leak or fail. Just remember to close your supply before you disconnect, every time. If you want an inline shut-off, that lives on the appliance or regulator side, not here.\u003c\/p\u003e\n\u003cp\u003eInstalling it is about as simple as propane gets. Hand-thread the adapter onto the mating Type I ACME connection until it stops, then bring it home with a wrench, usually about a quarter turn past hand-tight. Don't crank on it. Brass seats with a firm snug, and overtightening just galls the threads. Once it's connected, brush a little soapy water over the joint and open the gas. No bubbles means a good seal. Bubbles mean back it off and reseat. That soapy-water check takes ten seconds and it's the single best habit you can build with any propane connection.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anyone running a Camco Campfire setup who wants the convenience of grab-and-go 1 pound bottles. Campers, tailgaters, RV owners, and weekend cooks who don't want to haul a full-size tank for a quick fire or a short cook. It's also handy if you've got an appliance with a Type I ACME inlet and a box of 1 pound cylinders you'd rather burn through. What it's not: it's not a regulator, and it's not a shut-off, so don't treat it as either. It's a thread adapter, and it does that one job well.\u003c\/p\u003e\n\u003cp\u003eThe 1 inch-20 throwaway thread on the outlet is an industry-standard size. It's the same connection molded into the neck of nearly every 1 pound disposable propane cylinder sold, so you're not locked into a single bottle. Grab whatever's on the shelf, thread it on, and go. When you're done for the season, disconnect the bottle, cap the adapter if you've got a cover, and store it somewhere dry so the brass stays bright and the threads stay clean.\u003c\/p\u003e\n\u003cp\u003eKeep a spare in the trailer or the gear bag. At this size, having a backup adapter tucked away means a stripped thread or a lost fitting never ends your evening or your cook. And because it's a standard Camco part number, the 59213, reordering it later or matching it to the right connection kit is always straightforward.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSolid brass body stands up to repeated bottle swaps and outdoor use, with threads that won't strip like plastic or pot-metal fittings\u003c\/li\u003e\n  \u003cli\u003eConverts a Type I ACME connection to a 1 inch-20 throwaway thread so an appliance built for a 20 or 30 lb tank can run off a 1 lb disposable bottle\u003c\/li\u003e\n  \u003cli\u003eWorks directly with Camco Campfire propane connection kits 59103, 59123 and 59143\u003c\/li\u003e\n  \u003cli\u003eNo built-in shut-off valve, so you control flow cleanly at the bottle or upstream tank valve\u003c\/li\u003e\n  \u003cli\u003e1 inch-20 male throwaway thread matches virtually any standard 1 lb disposable propane cylinder\u003c\/li\u003e\n  \u003cli\u003eCompact fitting hand-threads on, then snugs with a wrench for a leak-free seal\u003c\/li\u003e\n  \u003cli\u003eManufacturer part number 59213 makes reordering and kit matching simple\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the Camco 59213 propane adapter actually do?\u003c\/summary\u003e\n    \u003cp\u003eIt converts a Type I ACME propane connection to a 1 inch-20 throwaway thread. That lets an appliance built for a 20 or 30 pound tank run off a standard 1 pound disposable cylinder instead.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich Camco connection kits does the 59213 work with?\u003c\/summary\u003e\n    \u003cp\u003eIt's made to pair with the Camco Campfire connection kits 59103, 59123 and 59143. Thread it onto the kit to feed a portable propane campfire from a 1 pound bottle.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the 59213 have a shut-off valve?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's built without a shut-off valve on purpose. You control the gas at the bottle valve or the upstream tank valve, so always close your supply before you disconnect.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size propane bottle does it use?\u003c\/summary\u003e\n    \u003cp\u003eA standard 1 pound disposable cylinder with the common 1 inch-20 throwaway thread. That's the small camping bottle you'll find at most hardware stores and campgrounds.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the adapter made of?\u003c\/summary\u003e\n    \u003cp\u003eSolid brass. Brass threads hold up to repeated bottle swaps and outdoor handling without stripping, and they seal cleaner than plastic or pot-metal fittings over time.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the 59213 a regulator?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's a thread adapter, not a regulator. Any pressure regulation your appliance needs still comes from the regulator on the appliance or kit side. This part only changes the connection type.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I check the connection for leaks?\u003c\/summary\u003e\n    \u003cp\u003eThread the adapter on, snug it with a wrench about a quarter turn past hand-tight, then brush soapy water over the joint and open the gas. No bubbles means a good seal. If you see bubbles, back it off and reseat it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it without one of the Camco kits?\u003c\/summary\u003e\n    \u003cp\u003eYes, as long as your appliance has a Type I ACME connection. The 59213 converts that connection to a 1 inch-20 throwaway thread for a 1 pound bottle, kit or no kit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eShould I keep a spare on hand?\u003c\/summary\u003e\n    \u003cp\u003eIt's a good idea. The adapter is small and inexpensive, so keeping a backup in your trailer or gear bag means a lost or stripped fitting never cuts a trip short.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco 59213 Campfire Propane Adapter, Type I ACME to 1 Inch-20 Throwaway, Brass, Without Shut-Off Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e59213\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717592130\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInlet Connection\u003c\/th\u003e\n\u003ctd\u003eType I ACME\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutlet Connection\u003c\/th\u003e\n\u003ctd\u003e1 inch-20 Throwaway\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBottle Compatibility\u003c\/th\u003e\n\u003ctd\u003e1 lb disposable propane cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShut-Off Valve\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible Connection Kits\u003c\/th\u003e\n\u003ctd\u003eCamco 59103, 59123, 59143\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAdapter Function\u003c\/th\u003e\n\u003ctd\u003eConverts Type I ACME to 1 inch-20 throwaway connection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReplaces Tank Supply\u003c\/th\u003e\n\u003ctd\u003e20 or 30 lb propane tank\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003ePropane Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the Camco 59213 propane adapter actually do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It converts a Type I ACME propane connection to a 1 inch-20 throwaway thread. That lets an appliance built for a 20 or 30 pound tank run off a standard 1 pound disposable cylinder instead.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which Camco connection kits does the 59213 work with?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's made to pair with the Camco Campfire connection kits 59103, 59123 and 59143. Thread it onto the kit to feed a portable propane campfire from a 1 pound bottle.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the 59213 have a shut-off valve?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's built without a shut-off valve on purpose. You control the gas at the bottle valve or the upstream tank valve, so always close your supply before you disconnect.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size propane bottle does it use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A standard 1 pound disposable cylinder with the common 1 inch-20 throwaway thread. That's the small camping bottle you'll find at most hardware stores and campgrounds.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the adapter made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Solid brass. Brass threads hold up to repeated bottle swaps and outdoor handling without stripping, and they seal cleaner than plastic or pot-metal fittings over time.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the 59213 a regulator?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's a thread adapter, not a regulator. Any pressure regulation your appliance needs still comes from the regulator on the appliance or kit side. This part only changes the connection type.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I check the connection for leaks?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Thread the adapter on, snug it with a wrench about a quarter turn past hand-tight, then brush soapy water over the joint and open the gas. No bubbles means a good seal. If you see bubbles, back it off and reseat it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it without one of the Camco kits?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, as long as your appliance has a Type I ACME connection. The 59213 converts that connection to a 1 inch-20 throwaway thread for a 1 pound bottle, kit or no kit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Should I keep a spare on hand?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a good idea. The adapter is small and inexpensive, so keeping a backup in your trailer or gear bag means a lost or stripped fitting never cuts a trip short.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45067801919581,"sku":"2008976","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_d788a90b-6d88-4463-bfd8-2b49a0cffc7e.jpg?v=1789669988","url":"https:\/\/nvnmarine.com\/products\/camco-59213-propane-adapter-acme-to-1lb-bottle-brass","provider":"NVN Marine","version":"1.0","type":"link"}