{"product_id":"camco-59125-4-port-propane-tee-with-5-ft-hose","title":"Camco 59125 Four-Port Propane Distribution Tee with 5 Foot Hose","description":"\u003cp class=\"nvn-hero\"\u003eThe Camco 59125 is a four-port propane distribution tee that turns one tank into a small manifold. Connect a grill, a heater, and a lantern without swapping hoses. It's got POL, ACME, disposable-cylinder, and 1\/4 inch flare ports, plus a 5 foot supply hose in the box, with excess flow safety built into the POL fittings.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Camco 59125 is a four-port propane distribution tee that turns a single propane supply into a small manifold. If you've ever wanted to run a grill, a portable heater, and a lantern off one tank at the campsite, this is the fitting that makes it happen. It threads onto your main cylinder and gives you four different outlet connections, so you're not swapping hoses back and forth every time you want to fire up something different.\u003c\/p\u003e\n\u003cp\u003eHere's how the ports break down. One end is a Female Prest-O-Lite (POL) fitting with a Male ACME thread, which is what connects the tee to your main propane cylinder. From there you get an excess flow soft nose POL port, a 1 inch-20 male throwaway cylinder thread for the small disposable one-pound bottles, and a 1\/4 inch inverted flare outlet for running copper tubing to a fixed appliance. Four legs, four different ways to tap into the same gas supply.\u003c\/p\u003e\n\u003cp\u003eOne more note on the ports. Each leg is its own connection type, so you're not limited to one style of appliance or cylinder. That flexibility is the real value here. You can leave the tee mounted to your main tank and connect or disconnect whatever you need for the day, whether that's a two-burner camp stove in the morning or a heater once the sun goes down. It keeps a propane setup organized instead of a pile of loose adapters and hoses rolling around the storage bay.\u003c\/p\u003e\n\u003cp\u003eIt ships with a 5 foot supply hose, so you're not buying that separately. The hose runs an excess flow soft nose POL fitting on one end and a 1\/4 inch inverted male flare on the other. That gives you a bit of reach between the tank and whatever you're feeding, which is handy when the tank lives in one spot and the appliance sits a few feet away.\u003c\/p\u003e\n\u003cp\u003eThe soft nose POL fittings include excess flow protection. In plain terms, if the gas suddenly starts flowing faster than it should, say from a hose that popped loose or a line that got cut, the valve chokes the flow down to a trickle. It's a safety feature, and a good one. The thing to know is that the excess flow valve can trip if you crack open too many appliances at once and pull a big surge of gas through the tee. If that happens, close all your appliance valves, let it settle, then open them one at a time. It resets and you're back in business.\u003c\/p\u003e\n\u003cp\u003eA few install tips from experience. The 1 inch-20 throwaway cylinder thread wants to be hand-tightened fully and then given about another quarter turn. Don't gorilla it with a wrench. Once everything's connected, brush a little soapy water over each joint and open the gas. If you see bubbles, you've got a leak and you need to snug that connection or reseat it. It's a thirty-second check that's saved a lot of headaches. The 1\/4 inch inverted flare outlet does need a proper flare on your copper tubing, so if you're running a hard line, take your time with the flaring tool and don't cross-thread the nut on the first turn.\u003c\/p\u003e\n\u003cp\u003eOn the tank side, the Female POL and Male ACME thread combination is what mates the tee to your cylinder's service valve. Match it to your tank fitting before you head out. A thread mismatch there is the single most common reason one of these ends up back in the box, so it's worth a two-minute check against your tank.\u003c\/p\u003e\n\u003cp\u003eBetween trips, cap the fittings or store the tee somewhere clean and dry so grit doesn't work its way into the threads. Propane fittings seal on clean, undamaged threads, and a little care here keeps every connection tight for years.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anybody running more than one propane appliance off a single tank and tired of juggling connections. Campers and RVers use it to feed a grill and a heater at the same time. It's also handy at a base camp or a tailgate where you've got a stove going and a lantern to keep lit. If you only ever run one appliance, you don't need a four-port tee. But the moment you add a second or third burner, this Camco tee earns its keep and cleans up the whole setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eFour output ports let you feed multiple propane appliances from a single tank\u003c\/li\u003e\n  \u003cli\u003eFemale Prest-O-Lite (POL) with Male ACME thread connects to your main propane cylinder\u003c\/li\u003e\n  \u003cli\u003e1 inch-20 male throwaway cylinder thread port accepts small one-pound disposable bottles\u003c\/li\u003e\n  \u003cli\u003e1\/4 inch inverted flare outlet for running copper tubing to a fixed appliance\u003c\/li\u003e\n  \u003cli\u003eExcess flow soft nose POL fittings choke gas flow if a line fails, built-in safety\u003c\/li\u003e\n  \u003cli\u003eIncludes a 5 foot supply hose (excess flow soft nose POL x 1\/4 inch inverted male flare)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat can I connect to the Camco 59125 propane tee?\u003c\/summary\u003e\n    \u003cp\u003eIt's built to run additional propane appliances off a single tank. With four output ports, you can feed something like a grill, a portable heater, and a lantern from one supply instead of swapping a single hose back and forth.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does the tee connect to my propane tank?\u003c\/summary\u003e\n    \u003cp\u003eThe tank side uses a Female Prest-O-Lite (POL) fitting with a Male ACME thread, so it mates to your cylinder's service valve. Check that thread against your tank before you head out, since a mismatch is the most common fitment issue.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use a small disposable one-pound cylinder with it?\u003c\/summary\u003e\n    \u003cp\u003eYes. One of the four ports is a 1 inch-20 male throwaway cylinder thread, which is the standard connection for the small disposable propane bottles.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the 1\/4 inch inverted flare port for?\u003c\/summary\u003e\n    \u003cp\u003eThat outlet is meant for running 1\/4 inch copper tubing to a fixed appliance. You'll need to put a proper flare on the tubing with a flaring tool, and take your time so you don't cross-thread the nut.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a hose?\u003c\/summary\u003e\n    \u003cp\u003eIt does. There's a 5 foot supply hose in the box with an excess flow soft nose POL fitting on one end and a 1\/4 inch inverted male flare on the other.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the excess flow soft nose POL do?\u003c\/summary\u003e\n    \u003cp\u003eIt's a safety feature. If gas suddenly starts flowing faster than normal, like from a hose that popped loose, the excess flow valve chokes the flow down to a trickle instead of dumping the tank.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy did my gas shut off right after I opened it?\u003c\/summary\u003e\n    \u003cp\u003eThat's usually the excess flow valve tripping because too much gas surged through at once. Close all your appliance valves, let it settle for a moment, then open them one at a time. It resets and flows normally again.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I check the connections for leaks?\u003c\/summary\u003e\n    \u003cp\u003eHand-tighten the fittings, give the throwaway cylinder thread about a quarter turn more, then brush soapy water over each joint with the gas on. Bubbles mean a leak, so snug or reseat that connection until they stop.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I run more than one appliance at the same time?\u003c\/summary\u003e\n    \u003cp\u003eYou can, that's the whole point of the four ports. Just bring appliances up one at a time rather than cracking them all open at once, which helps keep the excess flow valve from tripping on a big surge.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco 59125 Four-Port Propane Distribution Tee with 5 Foot Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e59125\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717591256\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eNumber of Ports\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMain Tank Connection\u003c\/th\u003e\n\u003ctd\u003eFemale Prest-O-Lite (POL) \/ Male ACME Thread\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePOL Port\u003c\/th\u003e\n\u003ctd\u003eExcess Flow Soft Nose Prest-O-Lite (POL)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDisposable Cylinder Port\u003c\/th\u003e\n\u003ctd\u003e1 Inch-20 Male Throwaway Cylinder Thread\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFlare Port\u003c\/th\u003e\n\u003ctd\u003e1\/4 Inch Inverted Flare\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSupply Hose Length\u003c\/th\u003e\n\u003ctd\u003e5 Feet\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSupply Hose Fittings\u003c\/th\u003e\n\u003ctd\u003eExcess Flow Soft Nose Prest-O-Lite (POL) x 1\/4 Inch Inverted Male Flare\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcess Flow Protection\u003c\/th\u003e\n\u003ctd\u003eIncluded (soft nose POL fittings)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What can I connect to the Camco 59125 propane tee?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built to run additional propane appliances off a single tank. With four output ports, you can feed something like a grill, a portable heater, and a lantern from one supply instead of swapping a single hose back and forth.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does the tee connect to my propane tank?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The tank side uses a Female Prest-O-Lite (POL) fitting with a Male ACME thread, so it mates to your cylinder's service valve. Check that thread against your tank before you head out, since a mismatch is the most common fitment issue.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use a small disposable one-pound cylinder with it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. One of the four ports is a 1 inch-20 male throwaway cylinder thread, which is the standard connection for the small disposable propane bottles.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the 1\/4 inch inverted flare port for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"That outlet is meant for running 1\/4 inch copper tubing to a fixed appliance. You'll need to put a proper flare on the tubing with a flaring tool, and take your time so you don't cross-thread the nut.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a hose?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It does. There's a 5 foot supply hose in the box with an excess flow soft nose POL fitting on one end and a 1\/4 inch inverted male flare on the other.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the excess flow soft nose POL do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a safety feature. If gas suddenly starts flowing faster than normal, like from a hose that popped loose, the excess flow valve chokes the flow down to a trickle instead of dumping the tank.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why did my gas shut off right after I opened it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"That's usually the excess flow valve tripping because too much gas surged through at once. Close all your appliance valves, let it settle for a moment, then open them one at a time. It resets and flows normally again.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I check the connections for leaks?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Hand-tighten the fittings, give the throwaway cylinder thread about a quarter turn more, then brush soapy water over each joint with the gas on. Bubbles mean a leak, so snug or reseat that connection until they stop.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I run more than one appliance at the same time?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You can, that's the whole point of the four ports. Just bring appliances up one at a time rather than cracking them all open at once, which helps keep the excess flow valve from tripping on a big surge.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45059308453981,"sku":"2008414","price":103.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_06b1c46c-c55e-4d1e-b3d7-5f09b22618eb.jpg?v=1789501399","url":"https:\/\/nvnmarine.com\/products\/camco-59125-4-port-propane-tee-with-5-ft-hose","provider":"NVN Marine","version":"1.0","type":"link"}