{"product_id":"camco-55195-power-grip-50-amp-30-foot-shore-power-cord","title":"Camco 55195 Power Grip 50-Amp 30-Foot Shore Power Cord","description":"\u003cp class=\"nvn-hero\"\u003eThe Camco 55195 Power Grip is a 30-foot, 50-amp shore power cord with molded Power Grip handles on both ends and a built-in carrying strap. NEMA 14-50P to 14-50R, heavy 6\/3 copper, and an STW jacket built for wet-location life at the dock or the campground.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eWhen you pull into a 50-amp slip or an RV park pedestal, the last thing you want is a shore power cord that fights you. The Camco 55195 Power Grip is a 30-foot, 50-amp cord built to make that hookup quick and clean. Both ends carry Camco's molded Power Grip handles, so you're pushing and pulling on solid plastic instead of yanking the cord itself. That one detail saves your connectors over a season of daily plug-ins.\u003c\/p\u003e\n\u003cp\u003eThis is a full 50-amp cord with a NEMA 14-50P male and a 14-50R female end. That's the standard 125\/250V configuration you'll find on bigger boats, most large motorhomes, and just about every marina pedestal rated for 50 amps. Inside the black STW jacket you've got 6\/3 plus 8\/1 gauge copper conductors, which is the right wire size for carrying a real 50-amp load without heating up. Run your air conditioning, your water heater, and a battery charger at the same time, and this cord handles it.\u003c\/p\u003e\n\u003cp\u003eThirty feet is the sweet spot for most hookups. It reaches the pedestal from a normal slip or site without a mess of coiled cable underfoot, and it's short enough to store without eating your whole locker. When you're done, the built-in carrying strap wraps the coil and gives you a clean handle to sling it over your shoulder. Coil it the same direction each time and it'll lie flat for years.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anyone with a 50-amp shore power inlet. Larger cruisers and sportfish boats, big fifth wheels and Class A coaches, anything drawing the full 50 amps at the dock or the campground. If your inlet is a 30-amp TT-30, this isn't your cord, you'll want the 30-amp version instead. And if the pedestal sits farther than 30 feet from your inlet, add a matching 50-amp extension rather than forcing this one to stretch.\u003c\/p\u003e\n\u003cp\u003eInstallation is about as simple as it gets. There's nothing to wire and nothing to configure. Match the 14-50P male end to your boat or RV's power inlet, run the cord to the pedestal, and drop the 14-50R female onto the pedestal's 50-amp receptacle. Always plug into the boat or coach first and the pedestal last, and reverse that order when you leave, so you're never making the final connection on a hot cord. The Power Grip handles give you a firm hold for both moves, even with wet hands or gloves on a cold morning.\u003c\/p\u003e\n\u003cp\u003eWhy 50 amps matters: a 50-amp service is really two 120-volt legs, which is why the 14-50 has four pins and why you get far more usable power than a 30-amp hookup. That headroom is what lets a big boat or coach run multiple air conditioners and appliances at once without tripping the pedestal breaker. Undersize the cord and you get voltage drop and heat. This 6-gauge cord is sized to deliver that power the length of the run.\u003c\/p\u003e\n\u003cp\u003eA few things we've learned over years of selling these. Saltwater is hard on any connector, so hit the blades with a little dielectric grease before you plug in and you'll keep corrosion off the pins. Keep the jacket routed away from hot engine exhaust, because the black jacket will show heat marks if it rests against something hot. And take thirty seconds to set the carrying strap the right way around, so the cord doesn't twist itself into knots every time you carry it.\u003c\/p\u003e\n\u003cp\u003eThe STW jacket is built for outdoor life. It's rated for wet locations, stays flexible in the cold, and shrugs off the sun better than cheap cable, though like anything left in the UV all season the fabric strap will fade before the cord does. The molded strain reliefs at each plug take the stress off the wire where cords usually fail first. It's a simple piece of gear, but it's the one thing standing between your batteries and the dock, so it's worth buying right.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e50-amp rated for the full 125\/250V shore power draw, so a big rig can run multiple AC units and appliances at once\u003c\/li\u003e\n  \u003cli\u003e30-foot length reaches most dock pedestals and RV park posts without underfoot slack\u003c\/li\u003e\n  \u003cli\u003e6\/3 plus 8\/1 gauge copper conductors sized to carry a real 50-amp load without overheating\u003c\/li\u003e\n  \u003cli\u003eNEMA 14-50P male to 14-50R female ends, the standard 50-amp shore power configuration\u003c\/li\u003e\n  \u003cli\u003eMolded Power Grip handles on both ends give a firm hold for wet-hand, cold-morning plug-ins\u003c\/li\u003e\n  \u003cli\u003eBuilt-in carrying strap wraps the coil and doubles as a shoulder handle\u003c\/li\u003e\n  \u003cli\u003eBlack STW jacket rated for wet locations and outdoor use\u003c\/li\u003e\n  \u003cli\u003eMolded strain reliefs at each plug protect the wire where cords usually fail first\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a 50-amp cord?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's a full 50-amp cord with a NEMA 14-50P male end and a 14-50R female end, rated for 125\/250V service. That's the standard 50-amp shore power setup on larger boats and big RVs.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the plug ends?\u003c\/summary\u003e\n    \u003cp\u003eA NEMA 14-50P (four-prong male) plugs into the pedestal-side end, and a NEMA 14-50R (four-prong female) connects to your boat or RV power inlet. Both are the standard 50-amp shore power connectors.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long is the cord?\u003c\/summary\u003e\n    \u003cp\u003eThirty feet. That reaches most slip and campsite pedestals comfortably without leaving a huge coil underfoot.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat gauge wire is inside?\u003c\/summary\u003e\n    \u003cp\u003e6\/3 plus 8\/1 gauge copper conductors. The 6-gauge is the right size to carry the full 50-amp load the length of the run without voltage drop or heat build-up.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it work for both my boat and my RV?\u003c\/summary\u003e\n    \u003cp\u003eYes, as long as both use a 50-amp NEMA 14-50 shore power inlet. The connectors are the same standard whether you're plugging into a marina pedestal or a campground post.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it in a saltwater environment?\u003c\/summary\u003e\n    \u003cp\u003eYou can. Salt air is hard on any connector, so put a little dielectric grease on the blades before you plug in. That keeps corrosion off the pins and makes the connection last.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a carrying strap?\u003c\/summary\u003e\n    \u003cp\u003eIt does. There's a built-in strap that wraps the coiled cord and gives you a clean handle to carry it. Set it the right way around and the cord won't twist on you.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat if the pedestal is more than 30 feet away?\u003c\/summary\u003e\n    \u003cp\u003eDon't stretch this cord to reach. Add a matching 50-amp extension cord instead, so you keep the full wire gauge the whole run and avoid voltage drop.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat order should I plug and unplug it?\u003c\/summary\u003e\n    \u003cp\u003eConnect the cord to your boat or RV first, then plug into the pedestal last. When you leave, unplug the pedestal first. That way you're never making the final connection on a live cord.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco 55195 Power Grip 50-Amp 30-Foot Shore Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e55195\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717551953\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e50 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e30 Feet\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWire Gauge\u003c\/th\u003e\n\u003ctd\u003e6\/3 + 8\/1 Gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMale Plug\u003c\/th\u003e\n\u003ctd\u003eNEMA 14-50P\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFemale Connector\u003c\/th\u003e\n\u003ctd\u003eNEMA 14-50R\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage Rating\u003c\/th\u003e\n\u003ctd\u003e125\/250V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eJacket Type\u003c\/th\u003e\n\u003ctd\u003eSTW\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePlug Handle\u003c\/th\u003e\n\u003ctd\u003eMolded Power Grip handle, both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCarrying Strap\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a 50-amp cord?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's a full 50-amp cord with a NEMA 14-50P male end and a 14-50R female end, rated for 125\/250V service. That's the standard 50-amp shore power setup on larger boats and big RVs.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the plug ends?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A NEMA 14-50P (four-prong male) plugs into the pedestal-side end, and a NEMA 14-50R (four-prong female) connects to your boat or RV power inlet. Both are the standard 50-amp shore power connectors.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long is the cord?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Thirty feet. That reaches most slip and campsite pedestals comfortably without leaving a huge coil underfoot.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What gauge wire is inside?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"6\/3 plus 8\/1 gauge copper conductors. The 6-gauge is the right size to carry the full 50-amp load the length of the run without voltage drop or heat build-up.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it work for both my boat and my RV?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, as long as both use a 50-amp NEMA 14-50 shore power inlet. The connectors are the same standard whether you're plugging into a marina pedestal or a campground post.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it in a saltwater environment?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You can. Salt air is hard on any connector, so put a little dielectric grease on the blades before you plug in. That keeps corrosion off the pins and makes the connection last.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a carrying strap?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It does. There's a built-in strap that wraps the coiled cord and gives you a clean handle to carry it. Set it the right way around and the cord won't twist on you.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What if the pedestal is more than 30 feet away?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Don't stretch this cord to reach. Add a matching 50-amp extension cord instead, so you keep the full wire gauge the whole run and avoid voltage drop.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What order should I plug and unplug it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Connect the cord to your boat or RV first, then plug into the pedestal last. When you leave, unplug the pedestal first. That way you're never making the final connection on a live cord.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45000321695837,"sku":"2007848","price":198.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_0b7fb583-988c-41cd-a2cf-9f04b8624fc8.jpg?v=1788734548","url":"https:\/\/nvnmarine.com\/products\/camco-55195-power-grip-50-amp-30-foot-shore-power-cord","provider":"NVN Marine","version":"1.0","type":"link"}