{"product_id":"camco-55133-powergrip-30a-to-50a-rv-adapter","title":"Camco 55133 PowerGrip 30A to 50A RV Adapter","description":"\u003cp class=\"nvn-hero\"\u003eCamco's PowerGrip 55133 is the offset adapter that lets you run a 50-amp RV off a 30-amp power source. Plug the 30-amp end into a power station, generator, or pedestal, then connect your RV's 50-amp cord. The offset body takes strain off the plug, and the molded handle makes plugging and unplugging easy.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eWhen your camper's wired for 50-amp service but the only power you can reach is a 30-amp outlet, this Camco PowerGrip adapter bridges the gap. It's the offset-style 55133, built to plug your 50-amp RV shore cord into a 30-amp source like a portable power station, a generator, or a campground pedestal that only offers 30-amp service. The offset body angles the connection so the weight of your cord doesn't hang straight down on the plug, and that little detail saves a lot of wear over a season.\u003c\/p\u003e\n\u003cp\u003eHere's how it works out at the site. The adapter has a 30-amp male plug on one end that goes into the power source, and a 50-amp receptacle on the other that accepts your RV's 50-amp cord. No tools, no rewiring. You just plug in. The molded PowerGrip handle gives you something real to hold onto, so pulling the plug at the end of a wet morning doesn't turn into a fight. And when you're packing up, the compact body tucks into a bin or a cord bag without taking over the storage bay.\u003c\/p\u003e\n\u003cp\u003eNow, the honest part, because we'd rather you know before you're set up. Running a 50-amp rig off a 30-amp source doesn't magically give you 50-amp power. A 50-amp RV normally pulls two 120-volt legs. Through a 30-amp connection you're working with a single 120-volt leg, rated here at 30 amps and 3750 watts. That's plenty for lights, the fridge, the water heater, the microwave, and most of what you run day to day. But you can't fire up both air conditioners at once, and you'll want to stagger the big draws. If you've been running a household 15-amp adapter and tripping breakers, stepping up to a 30-amp source through this adapter is a real jump in headroom. Think of it as a smart way to stay powered when 30 amps is all that's on offer, not a full upgrade to 50-amp service.\u003c\/p\u003e\n\u003cp\u003eThe 55133 measures 6-1\/2 inches long, 2-1\/2 inches wide, and 4 inches deep, so it's a chunky, hand-filling piece rather than a flimsy pass-through. It's a non-locking connection, which is the standard for this kind of RV power adapter. The offset geometry is the star here. By kicking the cord out to the side instead of straight down, it takes the strain off the pins and keeps the contacts seated even when the shore cord tugs. Camco's been building RV electrical gear for decades, and the PowerGrip line is their answer to plugs that crack and handles that give you nothing to hold.\u003c\/p\u003e\n\u003cp\u003eWho reaches for one of these? Anybody running a 50-amp fifth wheel or motorhome who ends up somewhere with only 30-amp power. Portable power stations are a big one lately, since a lot of them put out 30 amps and your camper expects 50. Older campgrounds, a buddy's driveway, a 30-amp generator, an off-season site, they all fit the same story. It also plays nicely with the rest of your 50-amp cords and electrical accessories, so it slots right into the kit you already carry. Keep one in the bay next to your surge protector and your 15-amp adapter, and you're covered no matter what the post hands you.\u003c\/p\u003e\n\u003cp\u003eA couple of habits keep it happy. Seat it fully before you switch the power on, and pull it by the PowerGrip handle, never by the cord. Give the contacts a look now and then for any darkening, which is your early warning on any RV power connection. Do that and this little adapter will quietly earn its spot in the bay trip after trip. It's a small piece of gear, but it's the difference between a powered site and a dead battery bank when the only outlet around happens to be 30 amps.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e30-amp male plug to 50-amp receptacle, so your 50-amp RV cord connects to a 30-amp power source without rewiring\u003c\/li\u003e\n  \u003cli\u003eRated 125 volts and 3750 watts, enough for lights, fridge, water heater, and most daily loads on a single leg\u003c\/li\u003e\n  \u003cli\u003eOffset body angles the cord to the side, taking strain off the plug pins for longer service life\u003c\/li\u003e\n  \u003cli\u003eMolded PowerGrip handle gives you a solid grip for plugging and unplugging, even with wet hands\u003c\/li\u003e\n  \u003cli\u003eCompact 6-1\/2 x 2-1\/2 x 4 inch body stores easily in a cord bag or bay bin\u003c\/li\u003e\n  \u003cli\u003eNon-locking connection matches the standard RV 30-amp and 50-amp plug patterns\u003c\/li\u003e\n  \u003cli\u003eWorks with portable power stations, 30-amp generators, and 30-amp campground pedestals\u003c\/li\u003e\n  \u003cli\u003ePairs with your existing 50-amp shore cords and RV electrical accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I plug my 50-amp RV into a 30-amp outlet with this adapter?\u003c\/summary\u003e\n    \u003cp\u003eYes, that's exactly what it's for. The 30-amp male plug goes into the power source and your RV's 50-amp cord plugs into the 50-amp receptacle. No tools or rewiring needed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill I still get full 50-amp power through it?\u003c\/summary\u003e\n    \u003cp\u003eNo. A 50-amp RV normally uses two 120-volt legs, but a 30-amp source gives you a single 120-volt leg rated at 30 amps and 3750 watts. It runs most of your gear fine, but you can't run both air conditioners at the same time.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it safe to use a 50-amp to 30-amp adapter on an RV?\u003c\/summary\u003e\n    \u003cp\u003eYes, when it's seated fully and you manage your loads. The bigger risk is overloading the 30-amp source, so stagger high-draw appliances instead of running everything at once.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the adapter lock into place?\u003c\/summary\u003e\n    \u003cp\u003eNo, it's a non-locking connection, which is standard for RV 30-amp and 50-amp plugs. Seat it firmly and support the cord so the connection stays snug.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the wattage rating?\u003c\/summary\u003e\n    \u003cp\u003eIt's rated for 125 volts and 3750 watts at 30 amps, which is the limit of a single 120-volt leg from a 30-amp source.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it work with a portable power station?\u003c\/summary\u003e\n    \u003cp\u003eYes, as long as the power station has a 30-amp outlet. That's a common use for this adapter, since many portable stations offer 30-amp service while your camper expects 50.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow big is the adapter?\u003c\/summary\u003e\n    \u003cp\u003eIt measures 6-1\/2 inches long, 2-1\/2 inches wide, and 4 inches deep, so it's compact enough to store in a cord bag or storage bay.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need a wiring diagram to use it?\u003c\/summary\u003e\n    \u003cp\u003eNo wiring is involved. It's a plug-and-play adapter, so there's nothing to wire. Just plug the 30-amp end into the source and your 50-amp cord into the other end.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the advantage of the offset design over a dogbone adapter?\u003c\/summary\u003e\n    \u003cp\u003eThe offset body angles the cord to the side instead of hanging straight down, which relieves strain on the plug pins and keeps the contacts seated when the shore cord pulls on it.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco PowerGrip 55133 Offset 30-Amp to 50-Amp RV Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e55133\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717551335\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e30 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e125 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum Wattage\u003c\/th\u003e\n\u003ctd\u003e3750 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDimensions (L x W x D)\u003c\/th\u003e\n\u003ctd\u003e6-1\/2 in. x 2-1\/2 in. x 4 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnector Style\u003c\/th\u003e\n\u003ctd\u003eNon-Locking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHandle\u003c\/th\u003e\n\u003ctd\u003ePowerGrip Handle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAdapter Design\u003c\/th\u003e\n\u003ctd\u003eOffset\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Line\u003c\/th\u003e\n\u003ctd\u003ePowerGrip\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSource Connection\u003c\/th\u003e\n\u003ctd\u003e30-Amp Male Plug\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRV Connection\u003c\/th\u003e\n\u003ctd\u003e50-Amp Receptacle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I plug my 50-amp RV into a 30-amp outlet with this adapter?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, that's exactly what it's for. The 30-amp male plug goes into the power source and your RV's 50-amp cord plugs into the 50-amp receptacle. No tools or rewiring needed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will I still get full 50-amp power through it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. A 50-amp RV normally uses two 120-volt legs, but a 30-amp source gives you a single 120-volt leg rated at 30 amps and 3750 watts. It runs most of your gear fine, but you can't run both air conditioners at the same time.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it safe to use a 50-amp to 30-amp adapter on an RV?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, when it's seated fully and you manage your loads. The bigger risk is overloading the 30-amp source, so stagger high-draw appliances instead of running everything at once.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the adapter lock into place?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, it's a non-locking connection, which is standard for RV 30-amp and 50-amp plugs. Seat it firmly and support the cord so the connection stays snug.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the wattage rating?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's rated for 125 volts and 3750 watts at 30 amps, which is the limit of a single 120-volt leg from a 30-amp source.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it work with a portable power station?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, as long as the power station has a 30-amp outlet. That's a common use for this adapter, since many portable stations offer 30-amp service while your camper expects 50.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How big is the adapter?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It measures 6-1\/2 inches long, 2-1\/2 inches wide, and 4 inches deep, so it's compact enough to store in a cord bag or storage bay.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need a wiring diagram to use it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No wiring is involved. It's a plug-and-play adapter, so there's nothing to wire. Just plug the 30-amp end into the source and your 50-amp cord into the other end.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the advantage of the offset design over a dogbone adapter?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The offset body angles the cord to the side instead of hanging straight down, which relieves strain on the plug pins and keeps the contacts seated when the shore cord pulls on it.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45078182821981,"sku":"2009852","price":24.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_763560ff-d35f-478e-b436-639832443ca0.jpg?v=1789928595","url":"https:\/\/nvnmarine.com\/products\/camco-55133-powergrip-30a-to-50a-rv-adapter","provider":"NVN Marine","version":"1.0","type":"link"}