{"product_id":"camco-54623-921-led-bulb-t10-wedge-95-lumen-12v","title":"Camco 54623 921 LED Bulb, T10 Wedge 95 Lumen 12V","description":"\u003cp class=\"nvn-hero\"\u003eThe Camco 54623 is a 9-LED replacement bulb that drops straight into 921, 922, and 912 T10 wedge sockets. It puts out 95 lumens of bright white 12-volt light while running cooler and pulling less current than the incandescent it replaces. A simple, direct swap for the interior and courtesy lights in your RV or boat.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Camco 54623 is a 9-LED replacement bulb built to drop straight into a 921 T10 wedge socket, and it also covers 922 and 912 style bulbs that share the same base. If you've got an incandescent wedge bulb burning hot in an interior fixture, this is the direct swap. No adapters, no rewiring. You pull the old glass bulb out of the wedge socket and push this one in.\u003c\/p\u003e\n\u003cp\u003eWhere do you find 921 sockets? All over an RV or a boat. Interior dome lights, cabinet and pantry lights, porch and scare lights, reading lamps over the dinette, and plenty of 12-volt fixtures use the T10 wedge base. It's one of the most common bulbs on board, which is exactly why swapping the incandescents for LED pays off. Every one you change runs cooler and pulls less current.\u003c\/p\u003e\n\u003cp\u003eThat current draw is the real reason boaters and RVers make the switch. A stock 921 incandescent is a little furnace that eats amp-hours out of your house bank. Nine LEDs sipping 12 volts do the same lighting job for a fraction of the draw, so a night at anchor or a weekend dry-camping doesn't drain the batteries the way a cabin full of hot bulbs would. Less heat also means the fixture lens and the headliner around it stay cooler to the touch.\u003c\/p\u003e\n\u003cp\u003eLet's be straight about output. This bulb is rated at 95 lumens of bright white light from a single unit. That's a clean, useful light for a reading lamp, a cabinet, or a marker-style fixture, not a floodlight for a whole salon. If you're relighting a big dome fixture that used a very bright incandescent, you may want more than one bulb or a higher-output fixture. For most one-for-one wedge swaps, 95 lumens of crisp white is right in the pocket. The color is a true bright white, not the yellowish glow of the old filament bulbs, so charts, gear, and galley counters read clearly.\u003c\/p\u003e\n\u003cp\u003eInstallation takes about ten seconds per bulb. Kill the fixture, let the old bulb cool if it's been on, pull it out of the wedge socket, and press the LED in. One quirk worth knowing with any wedge-base LED: they can be polarity sensitive. If the bulb doesn't light on the first try, pull it, rotate it 180 degrees, and reseat it. That's normal, and it takes two seconds to sort out.\u003c\/p\u003e\n\u003cp\u003eKeep in mind this is a single bulb. Most fixtures take one, but if you're converting a whole rig from incandescent to LED, count your sockets and order enough to do the job in one pass. It's the kind of thing you want to knock out all at once rather than one bulb at a time. The packaging is labeled in English and French, so it's the same part you'd find on the shelf at a dealer.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anyone with 12-volt 921, 922, or 912 wedge sockets who wants cooler, lower-draw lighting without swapping the whole fixture. RV owners, trailer folks, and boaters running a 12-volt cabin all fit. What it's not: it isn't a color-changing or dimmable specialty bulb, and it won't turn a small reading lamp into a spotlight. It's an honest, efficient direct replacement for a very common bulb, and that's exactly what most people are after.\u003c\/p\u003e\n\u003cp\u003eA quick word on the numbers. The 921, 922, and 912 designations all describe closely related wedge bulbs, and this Camco replacement is built to cover that family in a single part. So if your fixture is spec'd for any of the three, this bulb fits the socket. On a boat, that covers a lot of the small interior and courtesy lights below deck. On an RV, it's the same story throughout the coach. One part number, a lot of sockets.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e9 individual LEDs deliver a measured 95 lumens of bright white light for clear, usable cabin and cabinet lighting\u003c\/li\u003e\n  \u003cli\u003eT10 wedge base drops directly into 921, 922, and 912 sockets with no adapters or rewiring\u003c\/li\u003e\n  \u003cli\u003e12-volt operation matches standard RV and marine house-power systems\u003c\/li\u003e\n  \u003cli\u003eSolid-state LED design runs far cooler than an incandescent, keeping fixture lenses and headliners cool to the touch\u003c\/li\u003e\n  \u003cli\u003eLow current draw stretches house-bank amp-hours for longer nights at anchor or dry-camping\u003c\/li\u003e\n  \u003cli\u003eBright white color renders charts, gear, and galley surfaces cleanly instead of the yellow cast of filament bulbs\u003c\/li\u003e\n  \u003cli\u003eSingle-bulb direct replacement, sized to swap one-for-one into existing wedge fixtures\u003c\/li\u003e\n  \u003cli\u003eEnglish and French language packaging, the same dealer-shelf part\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre 921 and 922 bulbs the same?\u003c\/summary\u003e\n    \u003cp\u003eThey share the same T10 wedge base and are used interchangeably in most 12-volt fixtures, which is why this Camco 54623 is built to replace both. If your fixture is marked 921 or 922, this bulb fits the socket.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I replace a 921 bulb with this LED?\u003c\/summary\u003e\n    \u003cp\u003eYes. That's exactly what it's for. Pull the old 921 incandescent out of the wedge socket and press this LED bulb in. No wiring changes.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre 921 and 912 bulbs interchangeable?\u003c\/summary\u003e\n    \u003cp\u003eThe 912 shares the same wedge base as the 921, so this bulb covers 912 fixtures too. Camco lists it as a replacement for 921, 922, and 912 style bulbs.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is equivalent to a 921 bulb?\u003c\/summary\u003e\n    \u003cp\u003eThe 922 and 912 are the closest equivalents, all built on the T10 wedge base. This Camco 54623 replaces all three with one part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow bright is it?\u003c\/summary\u003e\n    \u003cp\u003eIt's rated at 95 lumens from 9 LEDs. That's a clean, useful light for reading lamps, cabinets, and marker-style fixtures. For a large dome fixture you may want more than one bulb.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat voltage does it run on?\u003c\/summary\u003e\n    \u003cp\u003e12 volts, which matches standard RV and boat house-power systems.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is the light?\u003c\/summary\u003e\n    \u003cp\u003eBright white, not the yellow glow of an incandescent filament bulb.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many bulbs come in the package?\u003c\/summary\u003e\n    \u003cp\u003eOne. This is a single bulb. If you're converting several fixtures, count your sockets and order enough to finish the job.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eThe bulb won't light. What's wrong?\u003c\/summary\u003e\n    \u003cp\u003eWedge-base LEDs can be polarity sensitive. Pull the bulb, rotate it 180 degrees, and reseat it. It should light right up.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it on a boat?\u003c\/summary\u003e\n    \u003cp\u003eYes. It works in any 12-volt T10 wedge socket, which covers a lot of small interior and courtesy lights below deck.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco 54623 921 LED Replacement Bulb (T10 Wedge)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e54623\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717546232\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBulb Base\u003c\/th\u003e\n\u003ctd\u003eT10 Wedge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReplaces\u003c\/th\u003e\n\u003ctd\u003e921 (T10 Wedge), 922, 912 style bulbs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eNumber of LEDs\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Output\u003c\/th\u003e\n\u003ctd\u003e95 lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e12 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Color\u003c\/th\u003e\n\u003ctd\u003eBright White\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e1 bulb (Single)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eEnglish \/ French language\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are 921 and 922 bulbs the same?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"They share the same T10 wedge base and are used interchangeably in most 12-volt fixtures, which is why this Camco 54623 is built to replace both. If your fixture is marked 921 or 922, this bulb fits the socket.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I replace a 921 bulb with this LED?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. That's exactly what it's for. Pull the old 921 incandescent out of the wedge socket and press this LED bulb in. No wiring changes.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are 921 and 912 bulbs interchangeable?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The 912 shares the same wedge base as the 921, so this bulb covers 912 fixtures too. Camco lists it as a replacement for 921, 922, and 912 style bulbs.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is equivalent to a 921 bulb?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The 922 and 912 are the closest equivalents, all built on the T10 wedge base. This Camco 54623 replaces all three with one part.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How bright is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's rated at 95 lumens from 9 LEDs. That's a clean, useful light for reading lamps, cabinets, and marker-style fixtures. For a large dome fixture you may want more than one bulb.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What voltage does it run on?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"12 volts, which matches standard RV and boat house-power systems.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is the light?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Bright white, not the yellow glow of an incandescent filament bulb.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many bulbs come in the package?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"One. This is a single bulb. If you're converting several fixtures, count your sockets and order enough to finish the job.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"The bulb won't light. What's wrong?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Wedge-base LEDs can be polarity sensitive. Pull the bulb, rotate it 180 degrees, and reseat it. It should light right up.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it on a boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It works in any 12-volt T10 wedge socket, which covers a lot of small interior and courtesy lights below deck.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45088522600541,"sku":"2010297","price":16.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_f1efe75d-6b98-4844-841b-15a406461238.jpg?v=1790153790","url":"https:\/\/nvnmarine.com\/products\/camco-54623-921-led-bulb-t10-wedge-95-lumen-12v","provider":"NVN Marine","version":"1.0","type":"link"}