{"product_id":"camco-42593-rv-awning-anchor-kit-corkscrew-anchor","title":"Camco 42593 RV Awning Anchor Kit, Corkscrew Anchor","description":"\u003cp class=\"nvn-hero\"\u003eThe Camco 42593 Awning Anchor Kit is a simple, effective way to tie your RV awning down to the ground. A corkscrew anchor twists in by hand for a strong hold, and a sprung tensioner strap keeps steady, even pressure on the awning so a gust doesn't rock it or bend an arm. One kit secures one anchor point, no tools required.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you've ever watched a gust catch an unsecured awning and try to fold it back over the roof, you already know why ground anchors matter. The Camco 42593 Awning Anchor Kit gives you a straightforward way to tie an RV or camper awning down to the earth so a stiff afternoon breeze doesn't turn into an expensive repair. It's a single kit built around a corkscrew ground anchor, a tensioner strap, and the hooks you need to connect the two.\u003c\/p\u003e\n\u003cp\u003eThe anchor itself uses a corkscrew spiral design. You twist it straight into the ground and the spiral threads pull it down and bite in, so it holds far better than a straight stake you just pound in. That spiral is the whole trick. It spins in with hand pressure in most soil, and once it's seated it resists the upward pull an awning puts on it when the wind gets under the fabric. Grass, dirt, packed campsite gravel, most of the surfaces you'll actually park on will take it.\u003c\/p\u003e\n\u003cp\u003eOnce the anchor is in, you run the tensioner strap from the anchor up to the awning arm or rafter and snug it down. The strap works with springs that spread the tension evenly instead of yanking hard at one point. That even pull is what keeps the awning from rocking and lifting. It also means the strap gives a little in a gust rather than shock-loading the awning arm, which is exactly what you want when the weather turns. Snug is the goal here, not cranked down bar-tight. You want steady tension that holds the awning in place while still letting the spring do its job.\u003c\/p\u003e\n\u003cp\u003eThis is a kit made for real campsite use, so it packs down small. When you're done, the anchor and strap store compactly in a bin or a cabinet, and there's nothing here that needs tools or a special install. You screw the anchor in by hand, hook up the strap, tension it, and you're set. Breaking camp is the same in reverse. Release the tension, unhook, and back the corkscrew out of the ground.\u003c\/p\u003e\n\u003cp\u003eBecause it's a single kit, it covers one anchor point. The anchor, straps, and hooks are all included to rig that point, and the hooks are what let you connect and disconnect the strap quickly without tying knots every time you set up. If you want to tie down both awning arms, plan on a kit per side. Keeping a spare in the bay isn't a bad idea either, since a corkscrew anchor is the easy thing to leave behind in the grass when you're breaking camp in a hurry.\u003c\/p\u003e\n\u003cp\u003eIt's sized to work with awnings generally rather than one specific brand or length, so it's a sensible add for most RV and travel-trailer setups. A lot of owners run one on each side of the awning for balanced hold, and if you camp anywhere the wind picks up in the afternoon, that's a smart way to use them. Think open lakeside sites, desert campgrounds, anywhere there's not much to block the breeze.\u003c\/p\u003e\n\u003cp\u003eA couple of honest notes. This is a tie-down aid, not a substitute for good judgment. No anchor kit makes an awning storm-proof, and the guidance on any awning is to roll it up when you leave the site or when serious weather is coming. Use this to steady the awning in normal breezy conditions and for peace of mind while you're sitting under it, not as a reason to leave the fabric out in a thunderstorm. And soil matters. Soft ground holds a corkscrew beautifully. Hard-packed clay or solid rock won't take it, so pick your anchor point where you can actually get the spiral to bite.\u003c\/p\u003e\n\u003cp\u003eFor what it costs, it's cheap insurance. An awning replacement runs into real money, and a bent arm can put your setup out of commission for a trip. A corkscrew anchor and a sprung tension strap take a couple of minutes to deploy and take a lot of the worry out of leaving the awning out on a gusty day. If you've been meaning to add a proper tie-down to your rig, this is an easy one to keep in the storage bay.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eCorkscrew spiral anchor twists into the ground by hand and threads in for a strong, pull-resistant hold\u003c\/li\u003e\n  \u003cli\u003eTensioner strap with springs spreads load evenly so the awning doesn't rock or shock-load the arm in a gust\u003c\/li\u003e\n  \u003cli\u003eSingle kit includes the ground anchor, tensioner strap, and connecting hooks to secure one awning point\u003c\/li\u003e\n  \u003cli\u003eFits all awning sizes, so it works across most RV and travel-trailer setups\u003c\/li\u003e\n  \u003cli\u003eHook connections let you attach and release the strap fast, with no knots to tie at setup\u003c\/li\u003e\n  \u003cli\u003eScrews in by hand with no tools, so setup and teardown take a couple of minutes\u003c\/li\u003e\n  \u003cli\u003ePacks down compact for easy storage in a bay or cabinet between trips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's included in the Camco 42593 awning anchor kit?\u003c\/summary\u003e\n    \u003cp\u003eIt's a single kit with a corkscrew ground anchor, a tensioner strap, and the hooks to connect the strap to your awning. That covers one anchor point. If you want to secure both awning arms, plan on a kit per side.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does the corkscrew anchor hold in the ground?\u003c\/summary\u003e\n    \u003cp\u003eYou twist it straight down and the spiral threads pull it in and bite. That gives it far more resistance to upward pull than a straight stake, which is exactly what you need when the wind gets under an awning.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it fit my awning?\u003c\/summary\u003e\n    \u003cp\u003eIt's made to work with awnings generally rather than one specific size, so it suits most RV and travel-trailer awnings. You run the strap up to the awning arm or rafter and tension it down.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat kind of ground do I need?\u003c\/summary\u003e\n    \u003cp\u003eSoft ground like grass, dirt, or packed campsite soil takes the corkscrew well. Solid rock or very hard-packed clay won't let the spiral bite, so pick an anchor point where you can actually screw it in.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need any tools to set it up?\u003c\/summary\u003e\n    \u003cp\u003eNo. You screw the anchor in by hand, hook up the strap, and snug the tension. Teardown is the reverse, and the kit packs down compact for storage.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the strap adjust for tension?\u003c\/summary\u003e\n    \u003cp\u003eYes. The tensioner strap works with springs that spread the load evenly, so you can snug the awning down without shock-loading the arm, and it gives a little in a gust instead of yanking at one point.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I tie down both sides of my awning with one kit?\u003c\/summary\u003e\n    \u003cp\u003eOne kit covers one anchor point. If you want to secure both awning arms for a balanced hold, plan on running a kit per side.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I leave my awning out in a storm if it's anchored?\u003c\/summary\u003e\n    \u003cp\u003eNo. This steadies an awning in normal breezy conditions, but it isn't a storm rig. Roll the awning up when you leave the site or when serious weather is coming.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco RV Awning Anchor Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e42593\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717425933\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAnchor Type\u003c\/th\u003e\n\u003ctd\u003eCorkscrew spiral ground anchor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Components\u003c\/th\u003e\n\u003ctd\u003eGround anchor, tensioner strap, hooks\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTension System\u003c\/th\u003e\n\u003ctd\u003eStrap with springs for even tension distribution\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInstallation Method\u003c\/th\u003e\n\u003ctd\u003eScrew-in by hand, no tools required\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eKit Configuration\u003c\/th\u003e\n\u003ctd\u003eSingle kit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAwning Compatibility\u003c\/th\u003e\n\u003ctd\u003eFits all awning sizes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eRV and camper awning tie-down\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003ePacks down compact\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackaging Language\u003c\/th\u003e\n\u003ctd\u003eEnglish\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's included in the Camco 42593 awning anchor kit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a single kit with a corkscrew ground anchor, a tensioner strap, and the hooks to connect the strap to your awning. That covers one anchor point. If you want to secure both awning arms, plan on a kit per side.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does the corkscrew anchor hold in the ground?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You twist it straight down and the spiral threads pull it in and bite. That gives it far more resistance to upward pull than a straight stake, which is exactly what you need when the wind gets under an awning.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it fit my awning?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's made to work with awnings generally rather than one specific size, so it suits most RV and travel-trailer awnings. You run the strap up to the awning arm or rafter and tension it down.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What kind of ground do I need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Soft ground like grass, dirt, or packed campsite soil takes the corkscrew well. Solid rock or very hard-packed clay won't let the spiral bite, so pick an anchor point where you can actually screw it in.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need any tools to set it up?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. You screw the anchor in by hand, hook up the strap, and snug the tension. Teardown is the reverse, and the kit packs down compact for storage.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the strap adjust for tension?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The tensioner strap works with springs that spread the load evenly, so you can snug the awning down without shock-loading the arm, and it gives a little in a gust instead of yanking at one point.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I tie down both sides of my awning with one kit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"One kit covers one anchor point. If you want to secure both awning arms for a balanced hold, plan on running a kit per side.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I leave my awning out in a storm if it's anchored?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This steadies an awning in normal breezy conditions, but it isn't a storm rig. Roll the awning up when you leave the site or when serious weather is coming.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45074499993693,"sku":"2009323","price":36.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_d3481261-2004-453d-953f-a92836d3bece.jpg?v=1789807378","url":"https:\/\/nvnmarine.com\/products\/camco-42593-rv-awning-anchor-kit-corkscrew-anchor","provider":"NVN Marine","version":"1.0","type":"link"}