Camco 41930 Pivoting Wash Head with Wool Pad

The Camco 41930 is the wash head, not the whole brush. It's a pivoting head fitted with a synthetic wool pad, and it threads onto a multi-purpose wash handle so you can reach the parts of your rig you can't get to standing flat-footed. If you already own a good extension handle, this is the piece that does the actual scrubbing.

Here's what makes it worth having. The head pivots. So when you drag it up the curved sidewall of a travel trailer or along the flare of a boat hull, the pad stays flat against the surface instead of digging in at one edge. That even contact is what keeps you from leaving swirl marks, and it's the difference between a pad that cleans and one that just slides around. The synthetic wool holds a good amount of soapy water too, so you're carrying suds up to the surface instead of scrubbing it dry.

The pad attaches with a hook-and-loop side panel. Pull it off when it's caked with grime, rinse it out, and press it back on. When it finally wears out after a few seasons, you swap the pad and keep the head. That's the whole idea here. You're not throwing away a handle every time the pad gives up.

One thing to be clear about, because the packaging spells it out: this head has no hose connection, no water control valve, and no soap dispenser. It's a dip-and-wash head. You work out of a bucket of soapy water, load the pad, wash a section, reload. For most boaters and RV owners that's exactly how you want to wash anyway. Flow-through brushes are handy, but they use a lot of water and they don't let you control the soap the way a bucket does. If you were hoping for a hose-fed brush, this isn't that. If you want a simple, gentle wash head you can run off a bucket, it's a great pick.

Where does it earn its keep? RV roofs, first. Getting up top to scrub a rubber or fiberglass roof is a chore, and a pivoting wool head on a telescoping handle lets you do it from the ladder or even from the ground on a smaller trailer. Boat hulls and topsides are the other big one. The wool is soft enough for gelcoat and won't chew up your decals or striping. It's also handy on the high sides of a truck or a tow vehicle, the back glass, anywhere your hand won't reach without a step stool.

It fits Camco multi-purpose handles, and it'll thread onto most standard wash handles with the common tapered fitting. If you've already got a handle in the garage, check the threads before you order a new one, odds are good this head drops right on. The pad comes in bilingual English and French packaging, which is just a note on the box, nothing that changes how it works.

A couple of tips from washing a lot of boats and rigs. Rinse the pad out often while you work, because the grit you pick up is what scratches a finish, not the wool itself. Two buckets help, one for soap and one for rinse water, so you're not dragging the same dirt back onto the surface. Work top to bottom so the dirty runoff heads for panels you've already cleaned. And when you're done, give the pad a good rinse, wring it out, and let it air dry before it goes back in the storage bay. Wool that gets put away damp and packed tight can start to smell. Do that and one pad lasts a long time.

Bottom line: it's a simple, honest piece of gear. A pivoting head, a soft wool pad, and a standard handle fitting. Nothing to leak, nothing to plug in, nothing to break. Keep a spare pad on the shelf and this head will outlast a whole pile of disposable brushes.