Camco 40435 RV Roof Vent Cover White, Fits 14x14
Camco 40435 RV Roof Vent Cover White, Fits 14x14 — Product description
The Camco 40435 is a white roof vent cover that fits standard 14 by 14 inch RV vents and lets you keep the vent open in the rain. Its one-side dome shape moves air out while shedding water off the top, and the UV-stabilized resin holds up to full sun season after season. Installation hardware is included.
The Camco 40435 is a white roof vent cover that lets you keep your RV's roof vent open while you're rolling down the highway or parked in the rain. It fits over a standard 14 inch by 14 inch roof vent, and once it's on, you get steady airflow through the coach without worrying about a sudden shower soaking the mattress below. That's the whole idea. Fresh air in, weather out.
The shape does the work here. It's a low dome that sits over the vent opening, and it vents on one side rather than all the way around. That one-side design is what keeps rain from blowing straight down into the vent. Air moves out under the cover, but water hitting the top runs off the smooth dome instead of dropping through. So you can crank the vent open on a muggy night, leave it open when you break camp, and not think twice when the sky opens up. The aerodynamic profile also means less wind noise and less drag when you're towing or driving at speed.
Fit is the part people worry about, and it's straightforward. If your rig has a 14 inch by 14 inch roof vent, and the vast majority of travel trailers, fifth wheels, and motorhomes do, this cover mounts right over it. You're not replacing the vent itself. The vent, its lid, and its crank stay exactly where they are. The cover goes on top, over the existing opening, so you keep full use of the vent you already have while adding rain protection above it.
Installation hardware comes in the box, so you've got the screws you need to mount it. It's a roof job, so plan for a dry day, a ladder, and a tube of sealant to bed the fasteners and keep the roof watertight around the mounting points. Most owners have it up in well under an hour. The louvers are removable, which sounds like a small thing until it's cleaning day. Pop them out, rinse off the dust, leaves, and pollen that always seem to collect up there, and snap them back in. No scrubbing around fixed slats.
The cover is molded from UV-stabilized resin, which matters more than it sounds. A roof accessory lives its entire life in direct sun. Plain plastic goes brittle and chalky after a couple of seasons of that. The UV stabilizer is there to slow the fade and hold the material together through the heat cycles. The white finish also reflects sun rather than soaking it up, which is the right call for something sitting on your roof all summer.
There's a comfort angle too. A vent left open moves warm, stale air out of the coach and cuts down on the condensation that builds up overnight, especially in cooler weather when you've got people breathing and maybe a kettle going inside a sealed box. Running the vent open with this cover on top means you get that air exchange around the clock instead of only on clear, dry days. Over a long trip, that adds up to a coach that feels fresher and stays drier.
Who's this for? Anyone who wants to run their vent open more of the time. Full-timers who need to move air through the coach in humid weather. Weekenders who forget to close the vent before a drive and would rather not gamble on the forecast. Pet owners leaving the rig parked and wanting ventilation without an open hole in the roof. It's a simple upgrade that changes how you use the vent you already paid for.
A couple of honest notes. This is the single-cover pack, so if you've got two or three roof vents you want to cover, order one per vent. And it's a white cover sized for the common 14 by 14 vent, so measure your opening before you buy if you're not sure. The packaging is labeled in English and French, which is handy if you're crossing into Canada, but the install is the same either way.
It's not a fancy piece of gear. It's a well-shaped, sun-resistant cover that solves one real problem, keeping your vent open in the weather, and does it without a lot of fuss. That's exactly what you want out of a roof accessory.
Key Features
- Fits standard 14 in x 14 in roof vents, so it mounts over the vent you already have with no replacement needed
- One-side dome venting keeps rain out while air keeps moving, so you can leave the vent open in wet weather
- Aerodynamic low-profile dome cuts wind noise and drag at highway speed
- Molded from UV-stabilized resin to hold up to constant sun without going brittle or chalky
- White finish reflects heat instead of soaking it up on the roof
- Removable louvers pop out for a quick rinse, then snap back in
- Installation hardware included to mount over the existing vent
- Exterior roof mount adds rain protection above the vent without changing how the vent works inside
- Single-cover pack, so order one per roof vent you want to protect
- English and French packaging, ready for cross-border travel into Canada
Why Buy from NVN Marine
- Authorized Camco reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Camco 40435 RV Roof Vent Cover, White, Fits 14 x 14 Vents |
|---|---|
| Brand | Camco |
| Manufacturer Part Number | 40435 |
| UPC | 014717404358 |
| Mounting Location | Exterior |
| Ventilation Type | Dome |
| Vent Configuration | Vented on One Side |
| Compatible Vent Size | 14 in x 14 in |
| Color | White |
| Material | UV-Stabilized Resin |
| Removable Louvers | Yes |
| Installation Hardware | Included |
| Packaging Language | English / French |
| Sold As | Single (one cover) |
Frequently asked questions
Will this fit my RV vent?
It's built for standard 14 inch by 14 inch roof vents, which is what most travel trailers, fifth wheels, and motorhomes use. Measure your vent opening before you order if you're not sure yours is the standard size.
Can I leave the vent open in the rain with this cover on?
Yes, that's the whole point. The dome vents on one side and sheds water off the top, so air keeps moving out while rain runs off instead of dropping through the opening.
Does it replace my existing roof vent?
No. It mounts over the vent you already have. Your vent, its lid, and its crank all stay in place, and you keep full use of them with the cover added on top for weather protection.
Is the mounting hardware included?
Yes, the screws you need come in the box. Because it's a roof install, plan to add a tube of sealant to bed the fasteners and keep the roof watertight around the mounting points.
What's it made of?
It's molded from UV-stabilized resin in white. The UV stabilizer slows fading and keeps the material from getting brittle after seasons of direct sun.
How many covers come in the pack?
This is the single-cover pack, one cover. If you want to cover more than one roof vent, order one per vent.
Can I clean it?
Yes. The louvers are removable, so you pop them out, rinse off the dust, leaves, and pollen that collect up top, and snap them back in.
Does it cut down on wind noise while driving?
The low, aerodynamic dome shape is designed to reduce drag and wind noise compared to an open or squared-off vent when you're towing or driving at speed.
What does 'vented on one side' mean?
Air exits through openings on a single side of the dome rather than all the way around. That's what lets warm, stale air escape while keeping rain from blowing straight down into the vent.
Will it help with condensation inside the coach?
It lets you run the vent open around the clock, so warm, moist air keeps moving out. That air exchange helps cut the overnight condensation that builds up in a closed-up coach.