{"product_id":"camco-40154-jensen-rv-roof-vent-lid-14x14-white","title":"Camco 40154 Jensen RV Roof Vent Lid, 14x14, White","description":"\u003cp class=\"nvn-hero\"\u003eThe Camco 40154 is a direct replacement lid for older Jensen RV roof vents, the ones with a pin hinge built before 1994. It's impact-resistant white polypropylene, comes preassembled, and includes all the rust-resistant mounting hardware you need to close up any standard 14 by 14 inch vent.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf the vent lid up on your RV roof has gone brittle, cracked, or lost a hinge, the Camco 40154 gets you sealed back up. It's a direct replacement lid for older Jensen roof vents, the ones built with a pin hinge prior to 1994. Camco molds it from impact-resistant white polypropylene, so it shrugs off sun and weather a lot better than the tired lid you're pulling off. It fits any standard 14 by 14 inch vent opening, which is the size the vast majority of RV roof vents use.\u003c\/p\u003e\n\u003cp\u003eThe pre-1994 detail matters, so check before you order. Jensen changed their hinge design over the years, and this lid is cut for the pin-hinge style they used on vents made before 1994. A pin hinge rides on a metal pin through the lid ears, not a molded plastic living hinge and not a torsion arm. If you're not sure what you've got, climb up and look at how the old lid pivots at the back edge. If it swings on a straight pin you can see running through a set of tabs, you're in the right place. Measure the opening too. Corner to corner it should come out right around 14 by 14 inches.\u003c\/p\u003e\n\u003cp\u003eWhy do these lids fail in the first place? Sun, mostly. Years of UV bake the plastic until it yellows and goes brittle, and then one hailstorm or a low branch is all it takes to crack it. A gust catching a weak lid at highway speed will finish the job in a hurry. And once a lid cracks, water starts finding its way into the coach, which is a much bigger headache than a twenty-dollar lid. So it's worth swapping sooner than later. The 40154's polypropylene shell is built to take an impact and hold up through more seasons of exposure.\u003c\/p\u003e\n\u003cp\u003eCamco ships this one preassembled, which saves you fighting with small parts on a hot roof. All the mounting hardware comes in the box, and it's rust resistant, so it won't streak your roof or seize up the next time you need to get in there. For most folks it's a straightforward job. Pull the old lid off the vent base, set the new one in place so the hinge lines up with the existing mounts, and fasten it down with the included hardware. Take a minute to snug the fasteners evenly so the lid sits flat and closes clean against the seal. No special tools and no trip to the hardware store. If you can handle a screwdriver on a ladder, you can handle this.\u003c\/p\u003e\n\u003cp\u003eOne thing to be clear on. This is the lid only, the part that flips up and down over the vent opening. It's not a full vent assembly and it's not a powered fan. If your whole vent frame is shot, or you're chasing a dead fan motor, this isn't the part for that job. But if the base is solid and you just need a fresh lid to close things back up and keep the weather out, the 40154 is the honest fix. It's white to match the common factory look, and it comes in English and French packaging.\u003c\/p\u003e\n\u003cp\u003eA quick tip once it's on. Give the new lid a look every spring when you're up there checking seals and reseating any lifted sealant. Catching a hairline crack early, before it opens up in a storm, keeps the water outside where it belongs and gets you the full life out of the lid. It's a five-minute look that pays for itself in avoided water damage. And a lid that closes clean also keeps leaves, road grit, and the odd curious wasp out of your vent opening while you're parked.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eImpact-resistant white polypropylene shell holds up to sun, hail, and branch strikes better than a worn factory lid\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for Jensen RV roof vents with a pin hinge manufactured prior to 1994\u003c\/li\u003e\n  \u003cli\u003eFits all standard 14 by 14 inch RV roof vent openings\u003c\/li\u003e\n  \u003cli\u003eComes preassembled so there's no fussing with small parts on a hot roof\u003c\/li\u003e\n  \u003cli\u003eIncludes all mounting hardware, and it's rust resistant so it won't streak the roof or seize up\u003c\/li\u003e\n  \u003cli\u003eLid-only replacement that fastens onto your existing solid vent base\u003c\/li\u003e\n  \u003cli\u003eWhite finish matches the common factory roof-vent look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill this lid fit my Jensen vent?\u003c\/summary\u003e\n    \u003cp\u003eIt fits Jensen RV roof vents that use a pin hinge and were manufactured prior to 1994, on any standard 14 by 14 inch opening. If your Jensen vent is that older pin-hinge style, this is the right lid.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I know if I have a pin hinge?\u003c\/summary\u003e\n    \u003cp\u003eA pin hinge swings on a straight metal pin running through a set of tabs, or ears, at the back edge of the lid. It's not a molded plastic living hinge and not a torsion arm. Climb up and watch how the old lid pivots to confirm.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with mounting hardware?\u003c\/summary\u003e\n    \u003cp\u003eYes. All the mounting hardware is included in the box, and it's rust resistant so it won't streak your roof or seize up down the road.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the lid made of?\u003c\/summary\u003e\n    \u003cp\u003eImpact-resistant polypropylene. That's what lets it take a hit from hail or a branch and hold up to years of sun better than the brittle lid you're replacing.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come assembled?\u003c\/summary\u003e\n    \u003cp\u003eYes, Camco ships it preassembled, so you're not fitting small parts together on a hot roof. Pull the old lid, set this one on the existing base, and fasten it down.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this the whole vent or just the lid?\u003c\/summary\u003e\n    \u003cp\u003eJust the lid, the part that opens and closes over the vent opening. It's not a full vent assembly and it's not a powered fan. If your base is solid and you only need a new lid, this is it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size vent does it fit?\u003c\/summary\u003e\n    \u003cp\u003eAny standard 14 by 14 inch RV roof vent opening, which is the size most RV roof vents use. Measure your opening corner to corner to confirm.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is it?\u003c\/summary\u003e\n    \u003cp\u003eWhite, to match the common factory roof-vent look on most coaches.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco 40154 Jensen RV Roof Vent Lid with Pin Hinge, White\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e40154\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717401548\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eImpact-Resistant Polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits Vent Size\u003c\/th\u003e\n\u003ctd\u003e14 in x 14 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVent Compatibility\u003c\/th\u003e\n\u003ctd\u003eJensen with pin hinge, manufactured prior to 1994\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Hardware\u003c\/th\u003e\n\u003ctd\u003eMounting hardware, rust resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAssembly\u003c\/th\u003e\n\u003ctd\u003ePreassembled\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eVent lid and installation hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eEnglish \/ French\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will this lid fit my Jensen vent?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It fits Jensen RV roof vents that use a pin hinge and were manufactured prior to 1994, on any standard 14 by 14 inch opening. If your Jensen vent is that older pin-hinge style, this is the right lid.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I know if I have a pin hinge?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A pin hinge swings on a straight metal pin running through a set of tabs, or ears, at the back edge of the lid. It's not a molded plastic living hinge and not a torsion arm. Climb up and watch how the old lid pivots to confirm.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with mounting hardware?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. All the mounting hardware is included in the box, and it's rust resistant so it won't streak your roof or seize up down the road.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the lid made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Impact-resistant polypropylene. That's what lets it take a hit from hail or a branch and hold up to years of sun better than the brittle lid you're replacing.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come assembled?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, Camco ships it preassembled, so you're not fitting small parts together on a hot roof. Pull the old lid, set this one on the existing base, and fasten it down.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this the whole vent or just the lid?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Just the lid, the part that opens and closes over the vent opening. It's not a full vent assembly and it's not a powered fan. If your base is solid and you only need a new lid, this is it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size vent does it fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Any standard 14 by 14 inch RV roof vent opening, which is the size most RV roof vents use. Measure your opening corner to corner to confirm.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"White, to match the common factory roof-vent look on most coaches.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45079642243165,"sku":"2010007","price":21.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_10ab5b5e-6876-471f-8fee-a0d4e5aceedf.jpg?v=1789970836","url":"https:\/\/nvnmarine.com\/products\/camco-40154-jensen-rv-roof-vent-lid-14x14-white","provider":"NVN Marine","version":"1.0","type":"link"}