{"product_id":"camco-39753-rhinoflex-sewer-hose-storage-caps-2-pack","title":"Camco 39753 RhinoFLEX Sewer Hose Storage Caps, 2-Pack","description":"\u003cp class=\"nvn-hero\"\u003eThe Camco 39753 gives you two storage caps that seal both ends of your RV sewer hose before you stow it. One caps the bayonet fitting, the other caps the 4-in-1 elbow, and both hold an odor-tight seal. It's a small part that keeps your storage bay clean, dry, and smelling like nothing at all.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eAnyone who's wrestled with an RV sewer hose knows the worst part isn't the dump itself. It's what comes after. You disconnect, and both ends of that hose are still holding a little residue. Toss it in the storage bay uncapped and you've got drips, smell, and a mess you'll be scrubbing later. The Camco 39753 fixes that with a simple two-cap set, one for each end of your hose, so everything stays sealed up until your next trip.\u003c\/p\u003e\n\u003cp\u003eThe set gives you two different caps because your sewer hose has two different ends. One cap fits the bayonet fitting, the lug-style connector that locks onto your RV's waste outlet. The other caps the 4-in-1 elbow, the tapered end that drops into the dump station inlet. Each one presses on and holds an odor-tight seal. No more open hose ends breathing into your storage compartment every time you hit a bump in the road.\u003c\/p\u003e\n\u003cp\u003eThese are built to work across Camco's whole Rhino sewer hose lineup. If you're running a RhinoFLEX, a RhinoEXTREME, a Revolution, or an Easy Slip hose, these caps match the fittings. That's genuinely handy if you've swapped hoses over the years or run different setups on different rigs, because you're not stuck hunting for a cap that only fits one specific model. One set covers the fittings you're most likely to have.\u003c\/p\u003e\n\u003cp\u003eHere's the real reason to keep a set on hand. A capped hose is a clean hose bay. Full-timers deal with this every few days, and even weekend campers know the annoyance of pulling out a stored hose that wasn't sealed. Leftover gray and black water sitting in an open hose end doesn't just smell. It drips onto whatever else lives back there, your leveling blocks, your fresh water hose, your tools. Cap both ends and that whole problem goes away.\u003c\/p\u003e\n\u003cp\u003eAnd it's not only about odor. A sealed hose end is a hygiene thing too. That hose handles black tank waste, and you really don't want an open end resting against gear you touch with bare hands. Capping both ends keeps the dirty parts contained and the clean parts clean. If you store your hose inside the RV rather than in a bumper, that separation matters even more, because there's no sealed compartment between the hose and your living space.\u003c\/p\u003e\n\u003cp\u003eOne thing to be clear about. These are caps, not fittings, and not a hose. They don't add a hose connection or replace your bayonet or your elbow. They seal the ends of the fittings you already own. If what you actually need is the 4-in-1 elbow itself or a new bayonet fitting, that's a different part number. This set is purely about sealing your hose ends for storage and travel.\u003c\/p\u003e\n\u003cp\u003eUsing them couldn't be simpler. After you dump and give the hose a good rinse, let it drain, then push each cap onto its matching end. The bayonet cap goes over the lugs, the elbow cap slips over the tapered 4-in-1 end. Pull the hose into its bumper tube or storage bay and you're done. On travel days those capped ends also keep road grime, dust, and bugs out of the hose, so you're not starting your next hookup with a filthy connector.\u003c\/p\u003e\n\u003cp\u003eFor a two-pack that costs less than lunch on the road, these save you a lot of cleanup and a lot of nose-holding. Keep one set with your hose and stash a spare in the toolbox. When a cap eventually cracks in the cold or wanders off at a campground, and one always does, you'll be glad you had a backup ready to go. At this price, buying two sets at once is an easy call.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSet of two caps, one sized for the bayonet end and one for the 4-in-1 elbow end of your sewer hose\u003c\/li\u003e\n  \u003cli\u003eOdor-tight seal keeps waste residue and smell contained inside the hose during storage\u003c\/li\u003e\n  \u003cli\u003eFits Camco RhinoFLEX, RhinoEXTREME, Revolution, and Easy Slip sewer hose fittings\u003c\/li\u003e\n  \u003cli\u003eCaps only, with no hose connection, so they seal the fittings you already have rather than replace them\u003c\/li\u003e\n  \u003cli\u003ePresses on quickly after you dump and rinse, then pulls off just as easily\u003c\/li\u003e\n  \u003cli\u003eKeeps road grime, dust, and bugs out of the hose ends on travel days\u003c\/li\u003e\n  \u003cli\u003eCompact two-pack tucks into a bumper storage tube or a toolbox with your hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the Camco 39753 actually do?\u003c\/summary\u003e\n    \u003cp\u003eIt's a set of two caps that seal both ends of your RV sewer hose before you store it. One caps the bayonet fitting and one caps the 4-in-1 elbow, so leftover residue and odor stay locked inside the hose instead of dripping into your storage bay.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes this set include a sewer hose or fitting?\u003c\/summary\u003e\n    \u003cp\u003eNo. These are storage caps only, with no hose connection. They seal the bayonet and elbow fittings you already have. If you need the actual 4-in-1 elbow or a replacement bayonet fitting, that's a separate part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich caps come in the set?\u003c\/summary\u003e\n    \u003cp\u003eTwo different caps. One is sized for the bayonet end of your hose and the other fits the tapered 4-in-1 elbow end.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill these fit my RhinoFLEX hose?\u003c\/summary\u003e\n    \u003cp\u003eYes. They're made to fit Camco RhinoFLEX, RhinoEXTREME, Revolution, and Easy Slip sewer hose fittings, so one set covers the most common Camco hose setups.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo the caps create a tight seal?\u003c\/summary\u003e\n    \u003cp\u003eYes, each cap holds an odor-tight seal on its matching fitting, which keeps smell and residue contained while the hose is stored or in transit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy bother capping the hose ends?\u003c\/summary\u003e\n    \u003cp\u003eA capped hose keeps your storage bay clean and dry. Open hose ends drip gray and black water residue onto whatever else you store back there, and they let road grime and bugs into the hose on travel days.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use just one of the caps?\u003c\/summary\u003e\n    \u003cp\u003eSure. Each cap works on its own, so you can cap only the bayonet end or only the elbow end if that's all you need. Most folks use both to fully seal the hose.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre these caps the same as the elbow fitting itself?\u003c\/summary\u003e\n    \u003cp\u003eNo. They cap the ends of your existing fittings rather than replace them. Think of them as protective covers for storage, not a functional part of the dump connection.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco RhinoFLEX Sewer Hose Storage Caps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e39753\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717397537\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003eOne bayonet fitting cap and one 4-in-1 elbow fitting cap\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible Fittings\u003c\/th\u003e\n\u003ctd\u003eCamco RhinoFLEX, RhinoEXTREME, Revolution, and Easy Slip\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eBayonet end and 4-in-1 elbow end of the sewer hose\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeal Type\u003c\/th\u003e\n\u003ctd\u003eOdor-tight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHose Connection\u003c\/th\u003e\n\u003ctd\u003eNone (storage caps only)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eSeals sewer hose ends for storage and travel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eRV Sewer Sanitation Fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the Camco 39753 actually do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a set of two caps that seal both ends of your RV sewer hose before you store it. One caps the bayonet fitting and one caps the 4-in-1 elbow, so leftover residue and odor stay locked inside the hose instead of dripping into your storage bay.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does this set include a sewer hose or fitting?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. These are storage caps only, with no hose connection. They seal the bayonet and elbow fittings you already have. If you need the actual 4-in-1 elbow or a replacement bayonet fitting, that's a separate part.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which caps come in the set?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Two different caps. One is sized for the bayonet end of your hose and the other fits the tapered 4-in-1 elbow end.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will these fit my RhinoFLEX hose?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. They're made to fit Camco RhinoFLEX, RhinoEXTREME, Revolution, and Easy Slip sewer hose fittings, so one set covers the most common Camco hose setups.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do the caps create a tight seal?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, each cap holds an odor-tight seal on its matching fitting, which keeps smell and residue contained while the hose is stored or in transit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why bother capping the hose ends?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A capped hose keeps your storage bay clean and dry. Open hose ends drip gray and black water residue onto whatever else you store back there, and they let road grime and bugs into the hose on travel days.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use just one of the caps?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Sure. Each cap works on its own, so you can cap only the bayonet end or only the elbow end if that's all you need. Most folks use both to fully seal the hose.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are these caps the same as the elbow fitting itself?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. They cap the ends of your existing fittings rather than replace them. Think of them as protective covers for storage, not a functional part of the dump connection.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45096504524893,"sku":"2010827","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_1dc183c5-946a-4f99-ace1-205c3e6e4926.jpg?v=1790309267","url":"https:\/\/nvnmarine.com\/products\/camco-39753-rhinoflex-sewer-hose-storage-caps-2-pack","provider":"NVN Marine","version":"1.0","type":"link"}