{"product_id":"camco-25520-retro-rv-bubble-level-set-of-2","title":"Camco 25520 Retro RV Bubble Level Set of 2","description":"\u003cp class=\"nvn-hero\"\u003eThe Camco 25520 Retro RV Level is a two-pack of bubble levels that read side-to-side and front-to-rear at a glance. Mount one for each axis with the included foam tape or with screws, and you'll get your rig flat in seconds. No batteries, no calibration, and the UV-stabilized shell holds up to years of sun.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eGetting your rig level is the first thing you do at any site, and it's the thing that makes everything else work right. The Camco 25520 Retro RV Level gives you a simple, no-nonsense way to read side-to-side and front-to-rear at a glance. It's a set of two bubble levels shaped like a little retro camper, and once they're mounted you'll never have to dig one out of a drawer again.\u003c\/p\u003e\n\u003cp\u003eHere's the deal with bubble levels. There's nothing to calibrate, nothing to charge, and nothing to break. You pull into your spot, look at the bubble, and you know which way you're off. That's it. A bubble level tells you the truth every time, in bright sun or at dusk when your phone screen is washing out. For most of us who've been camping for years, this is still the fastest way to get set up.\u003c\/p\u003e\n\u003cp\u003eWhy two levels? Because leveling an RV is a two-axis job. You need to know side-to-side, and you need to know front-to-rear. Camco gives you a pair so you can dedicate one to each direction. A common setup is to mount one on the rear of the trailer where you can read it from the driver's side, and mount the second up near the tongue or along the side so you can check front-to-rear while you're working the tongue jack or the leveling blocks. Two levels, two axes, no guessing.\u003c\/p\u003e\n\u003cp\u003eMounting is flexible. Each level comes with double-sided foam tape, so you can peel and stick it to a clean, dry surface and be done in about a minute. Prefer something more permanent? There's a screw-on option too, which is the way to go if you mount on a spot that sees a lot of weather or a good bit of flex. Either way, pick a flat surface, make sure it's clean, and press firmly. The tape holds well once it's set.\u003c\/p\u003e\n\u003cp\u003eA quick tip on the read. Level is level, but your eyes want a reference, so mount each one square to the axis it's watching. Line the side-to-side level up parallel with the axle and the front-to-rear one straight along the frame. Get them on true when the rig is already sitting level in your driveway, and from then on the bubble is telling you exactly what you need. Some folks set the coach dead level once, then mount the levels to match. That's the trick that makes them accurate.\u003c\/p\u003e\n\u003cp\u003eThese are built to live outside. The material is UV-stabilized, so it won't go brittle and yellow after a season parked in the sun the way cheap plastic does. That matters on an RV, where everything on the exterior takes a beating from sunlight, rain, and road grime. Each level measures 2.60 inches long, 1.58 inches wide, and just 0.56 inches tall, so it sits close to the surface and stays out of the way.\u003c\/p\u003e\n\u003cp\u003eNow, why does any of this matter? A level rig isn't just about comfort, though sleeping on a slope is no fun and neither is a shower that pools at one end. The bigger reason is your absorption fridge. Those fridges rely on gravity to circulate the coolant, and they want to sit close to level to cool properly. Run one badly off-level for long and you can hurt it. Doors that swing shut on their own, drawers that won't stay put, slide-outs that bind, all of that traces back to a rig that isn't sitting flat. Get level first and the rest of your setup goes smoother.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anybody with a travel trailer, fifth wheel, motorhome, pop-up, or truck camper who wants a permanent, always-there reference. First-timers love it because it takes the mystery out of setup. Old hands like it because it's simple and it just works. And the retro camper shape is a nice touch that looks right at home on the side of your rig.\u003c\/p\u003e\n\u003cp\u003eIt's a small piece of gear, but it earns its keep every single trip. Stick a pair on, and leveling goes from a chore you eyeball to a thirty-second glance. That's the whole point.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSet of 2 levels so you can dedicate one to side-to-side and one to front-to-rear\u003c\/li\u003e\n  \u003cli\u003eBubble-type reading gives you a true, instant read with no batteries or calibration\u003c\/li\u003e\n  \u003cli\u003eCovers both leveling axes, side-to-side and front-to-rear\u003c\/li\u003e\n  \u003cli\u003eTwo mounting options: included double-sided foam tape or screw-on for a permanent hold\u003c\/li\u003e\n  \u003cli\u003eUV-stabilized material stands up to sun, rain, and road grime season after season\u003c\/li\u003e\n  \u003cli\u003eCompact 2.60 in x 1.58 in x 0.56 in footprint sits low and stays out of the way\u003c\/li\u003e\n  \u003cli\u003eRetro RV camper shape that looks right at home on the side of your rig\u003c\/li\u003e\n  \u003cli\u003eWorks on travel trailers, fifth wheels, motorhomes, pop-ups, and truck campers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does this Camco level show me?\u003c\/summary\u003e\n    \u003cp\u003eIt reads both directions you care about when parking an RV. Side-to-side and front-to-rear. The bubble tells you which way you're off so you know where to add blocks or crank the jack.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I get one level or two?\u003c\/summary\u003e\n    \u003cp\u003eTwo. It's a set of 2, which is exactly what you want. You dedicate one to side-to-side and one to front-to-rear so both axes are covered at a glance.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I mount them?\u003c\/summary\u003e\n    \u003cp\u003eYou've got two choices. Each level comes with double-sided foam tape for a quick peel-and-stick install on a clean, dry surface, or you can screw them on for a more permanent hold in spots that see a lot of weather.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhere should I mount the two levels?\u003c\/summary\u003e\n    \u003cp\u003eA common setup is one on the rear where you can read it from the driver's side for side-to-side, and one near the tongue or along the side for front-to-rear. Mount each square to the axis it's watching.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the adhesive included?\u003c\/summary\u003e\n    \u003cp\u003eYes. Double-sided foam tape comes with the set, so you can stick them on right out of the package. Screws are the alternative if you'd rather fasten them down.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy does leveling my RV matter?\u003c\/summary\u003e\n    \u003cp\u003eComfort is part of it, but the big reason is your absorption fridge, which needs to sit close to level to cool properly. A level rig also keeps doors and drawers from swinging, and helps slide-outs run true.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill these hold up parked in the sun?\u003c\/summary\u003e\n    \u003cp\u003eThey're made from UV-stabilized material, so they resist going brittle and yellow the way cheap plastic does after a season in the sun.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow big is each level?\u003c\/summary\u003e\n    \u003cp\u003eEach one measures 2.60 inches long, 1.58 inches wide, and 0.56 inches tall. Small enough to sit low and stay out of the way on any flat surface.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill these work on my type of camper?\u003c\/summary\u003e\n    \u003cp\u003eYes. They work on travel trailers, fifth wheels, motorhomes, pop-ups, and truck campers. Any flat exterior surface will do.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo they need batteries or calibration?\u003c\/summary\u003e\n    \u003cp\u003eNo. They're simple bubble levels. Nothing to charge, nothing to calibrate. Mount them true when your rig is sitting level and the bubble reads right from then on.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco 25520 Retro RV Bubble Level, Set of 2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e25520\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717255202\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLevel Type\u003c\/th\u003e\n\u003ctd\u003eBubble\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeveling Direction\u003c\/th\u003e\n\u003ctd\u003eSide-to-Side and Front-to-Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eRetro RV Shape\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e2.60 in x 1.58 in x 0.56 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Options\u003c\/th\u003e\n\u003ctd\u003eSelf-Adhesive or Screw-On\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Adhesive\u003c\/th\u003e\n\u003ctd\u003eDouble-Sided Foam Tape\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eUV-Stabilized\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does this Camco level show me?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It reads both directions you care about when parking an RV. Side-to-side and front-to-rear. The bubble tells you which way you're off so you know where to add blocks or crank the jack.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I get one level or two?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Two. It's a set of 2, which is exactly what you want. You dedicate one to side-to-side and one to front-to-rear so both axes are covered at a glance.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I mount them?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You've got two choices. Each level comes with double-sided foam tape for a quick peel-and-stick install on a clean, dry surface, or you can screw them on for a more permanent hold in spots that see a lot of weather.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Where should I mount the two levels?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A common setup is one on the rear where you can read it from the driver's side for side-to-side, and one near the tongue or along the side for front-to-rear. Mount each square to the axis it's watching.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the adhesive included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Double-sided foam tape comes with the set, so you can stick them on right out of the package. Screws are the alternative if you'd rather fasten them down.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why does leveling my RV matter?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Comfort is part of it, but the big reason is your absorption fridge, which needs to sit close to level to cool properly. A level rig also keeps doors and drawers from swinging, and helps slide-outs run true.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will these hold up parked in the sun?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"They're made from UV-stabilized material, so they resist going brittle and yellow the way cheap plastic does after a season in the sun.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How big is each level?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Each one measures 2.60 inches long, 1.58 inches wide, and 0.56 inches tall. Small enough to sit low and stay out of the way on any flat surface.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will these work on my type of camper?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. They work on travel trailers, fifth wheels, motorhomes, pop-ups, and truck campers. Any flat exterior surface will do.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do they need batteries or calibration?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. They're simple bubble levels. Nothing to charge, nothing to calibrate. Mount them true when your rig is sitting level and the bubble reads right from then on.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45095422689373,"sku":"2010792","price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_9a43e3e7-fd75-4bd5-a316-7722fbc65e63.jpg?v=1790279790","url":"https:\/\/nvnmarine.com\/products\/camco-25520-retro-rv-bubble-level-set-of-2","provider":"NVN Marine","version":"1.0","type":"link"}