Camco 25520 Retro RV Bubble Level Set of 2

Getting your rig level is the first thing you do at any site, and it's the thing that makes everything else work right. The Camco 25520 Retro RV Level gives you a simple, no-nonsense way to read side-to-side and front-to-rear at a glance. It's a set of two bubble levels shaped like a little retro camper, and once they're mounted you'll never have to dig one out of a drawer again.

Here's the deal with bubble levels. There's nothing to calibrate, nothing to charge, and nothing to break. You pull into your spot, look at the bubble, and you know which way you're off. That's it. A bubble level tells you the truth every time, in bright sun or at dusk when your phone screen is washing out. For most of us who've been camping for years, this is still the fastest way to get set up.

Why two levels? Because leveling an RV is a two-axis job. You need to know side-to-side, and you need to know front-to-rear. Camco gives you a pair so you can dedicate one to each direction. A common setup is to mount one on the rear of the trailer where you can read it from the driver's side, and mount the second up near the tongue or along the side so you can check front-to-rear while you're working the tongue jack or the leveling blocks. Two levels, two axes, no guessing.

Mounting is flexible. Each level comes with double-sided foam tape, so you can peel and stick it to a clean, dry surface and be done in about a minute. Prefer something more permanent? There's a screw-on option too, which is the way to go if you mount on a spot that sees a lot of weather or a good bit of flex. Either way, pick a flat surface, make sure it's clean, and press firmly. The tape holds well once it's set.

A quick tip on the read. Level is level, but your eyes want a reference, so mount each one square to the axis it's watching. Line the side-to-side level up parallel with the axle and the front-to-rear one straight along the frame. Get them on true when the rig is already sitting level in your driveway, and from then on the bubble is telling you exactly what you need. Some folks set the coach dead level once, then mount the levels to match. That's the trick that makes them accurate.

These are built to live outside. The material is UV-stabilized, so it won't go brittle and yellow after a season parked in the sun the way cheap plastic does. That matters on an RV, where everything on the exterior takes a beating from sunlight, rain, and road grime. Each level measures 2.60 inches long, 1.58 inches wide, and just 0.56 inches tall, so it sits close to the surface and stays out of the way.

Now, why does any of this matter? A level rig isn't just about comfort, though sleeping on a slope is no fun and neither is a shower that pools at one end. The bigger reason is your absorption fridge. Those fridges rely on gravity to circulate the coolant, and they want to sit close to level to cool properly. Run one badly off-level for long and you can hurt it. Doors that swing shut on their own, drawers that won't stay put, slide-outs that bind, all of that traces back to a rig that isn't sitting flat. Get level first and the rest of your setup goes smoother.

Who's this for? Anybody with a travel trailer, fifth wheel, motorhome, pop-up, or truck camper who wants a permanent, always-there reference. First-timers love it because it takes the mystery out of setup. Old hands like it because it's simple and it just works. And the retro camper shape is a nice touch that looks right at home on the side of your rig.

It's a small piece of gear, but it earns its keep every single trip. Stick a pair on, and leveling goes from a chore you eyeball to a thirty-second glance. That's the whole point.