{"product_id":"camco-25505-level-rv-ez-level-rv-bubble-level","title":"Camco 25505 Level-RV EZ Level | RV Bubble Level","description":"\u003cp class=\"nvn-hero\"\u003eThe Camco Level-RV EZ Level puts side-to-side and front-to-rear leveling in a single bubble gauge you mount right on your rig. Stick it down with the adhesive backing or screw it on for good. Glance at it while you pull onto your blocks and you'll know you're level before you ever step inside.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eLeveling an RV isn't just about comfort, though a level bed and a floor that doesn't feel like a funhouse sure help. It's about how the rig actually works. Your absorption refrigerator needs to sit close to level to cool right. Slide-outs and the entry door swing better on level ground. And nobody sleeps well with their head lower than their feet. The Camco Level-RV EZ Level gives you a fast, no-guess read so you can get set up and get on with the trip.\u003c\/p\u003e\n\u003cp\u003eWhat makes this one handy is that it reads both directions at once. One bubble shows side-to-side, the other shows front-to-rear, so you're not walking around the coach with a torpedo level checking one axis at a time. Pull onto your ramps or blocks, watch the bubbles settle, and you've got the whole picture from a single spot.\u003c\/p\u003e\n\u003cp\u003eYou get two ways to mount it. The self-adhesive backing lets you stick it on in seconds, no tools, which is great if you're renting, testing placement, or just don't want to put holes in anything. When you want it there for the long haul, the screw-on option locks it down so vibration and weather won't shake it loose. A lot of owners start with the adhesive to dial in the spot, then add screws once they know it's right.\u003c\/p\u003e\n\u003cp\u003ePlacement matters more than people expect. Mount it somewhere you can actually see while you're positioning the rig, and somewhere that represents the coach floor, not a fender or a panel that flexes. Common spots are the front A-frame or tongue area on a travel trailer, near the entry door, or on a flat exterior panel you pass on the way in. Whatever you pick, make sure the surface is clean and the level reads true when the RV is already sitting level on a known-flat pad. That first calibration read is what every future setup gets compared against.\u003c\/p\u003e\n\u003cp\u003eUsing it is simple. Park roughly where you want to camp, then check the side-to-side bubble first. If you're low on one side, drive up onto leveling blocks or ramps under those wheels until that bubble centers. Then handle front-to-rear with your tongue jack or landing gear until the second bubble centers too. Chock your wheels, drop your stabilizers, and you're done. On uneven sites you might chase it a little, but a permanent-mounted level makes each adjustment a quick glance instead of a trip back inside to see if the fridge shelf looks flat.\u003c\/p\u003e\n\u003cp\u003eThis is the single-unit version, so you get one gauge that covers both directions. If you like a level on more than one corner of the rig, or want a spare, you can add more. For most trailers and campers, though, one well-placed EZ Level is all it takes to stop the guesswork.\u003c\/p\u003e\n\u003cp\u003eA couple of real-world notes. Adhesive mounts can loosen over time from sun, heat, and road vibration, so if yours starts to lift, that's your cue to move to the screws. If you do screw it down on an exterior surface, run a little sealant around the screws so water can't work its way behind the mount. And remember a bubble level only tells you about the surface it's stuck to. Set your baseline on flat ground once, and it'll be honest with you every trip after.\u003c\/p\u003e\n\u003cp\u003eWho's this for? First-time trailer owners who want to take the anxiety out of setup, weekend campers who move sites often, and anyone tired of the two-person, a-little-more-no-too-much routine with a handheld level. It works on travel trailers, fifth wheels, pop-ups, truck campers, and toy haulers. If it has wheels and you park it to sleep in it, a permanent level earns its keep.\u003c\/p\u003e\n\u003cp\u003eCamco's been building RV and camping gear since 1966, and simple, dependable pieces like this are their bread and butter. It won't win any tech awards. It doesn't need batteries, an app, or a wiring diagram. It just tells you the truth about whether your rig is sitting flat, every time you glance at it. That's a genuinely useful upgrade to how you set up camp.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eDual-axis bubble design shows side-to-side and front-to-rear level at the same time, so you read both directions from one spot\u003c\/li\u003e\n  \u003cli\u003eSelf-adhesive backing mounts in seconds with no tools, ideal for quick placement or renters who can't drill\u003c\/li\u003e\n  \u003cli\u003eScrew-on mounting option locks it down permanently against road vibration and weather\u003c\/li\u003e\n  \u003cli\u003eNo batteries or power needed, it's a passive spirit level that just works\u003c\/li\u003e\n  \u003cli\u003eSingle-unit gauge covers a whole rig, mount it where you can see it during setup\u003c\/li\u003e\n  \u003cli\u003eFits travel trailers, fifth wheels, pop-ups, truck campers, and toy haulers\u003c\/li\u003e\n  \u003cli\u003eCamco part number 25505 from a brand building RV and camping gear since 1966\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the Camco 25505 show both side-to-side and front-to-rear level?\u003c\/summary\u003e\n    \u003cp\u003eYes. It has two bubble indicators in one gauge, one for side-to-side and one for front-to-rear, so you can check both directions without moving the level around.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I mount the Level-RV EZ Level?\u003c\/summary\u003e\n    \u003cp\u003eYou've got two options. Peel and stick it with the self-adhesive backing for a tool-free install, or screw it on for a permanent hold. Many owners use the adhesive to find the right spot first, then add screws once it's dialed in.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhere's the best place to mount a bubble level on my camper?\u003c\/summary\u003e\n    \u003cp\u003ePick a flat surface that represents the coach floor and that you can see while positioning the rig, like the front A-frame area or near the entry door. Avoid panels that flex, and clean the surface before mounting.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need to calibrate it?\u003c\/summary\u003e\n    \u003cp\u003eSet your baseline once. Park the RV on ground you know is level, mount the gauge, and confirm both bubbles read center. Every future setup gets compared to that baseline.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it need batteries or power?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's a bubble spirit level, so there's nothing to charge or replace. Just glance at it and read.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a single level or a set?\u003c\/summary\u003e\n    \u003cp\u003eThis is the single-unit version, one gauge that reads both axes. You can add more if you want a level on multiple corners of the rig.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the easiest way to level my RV with this?\u003c\/summary\u003e\n    \u003cp\u003eCheck side-to-side first and drive up onto blocks or ramps under the low-side wheels until that bubble centers. Then use your tongue jack or landing gear to center the front-to-rear bubble. Chock the wheels and drop your stabilizers.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill the adhesive hold up outdoors?\u003c\/summary\u003e\n    \u003cp\u003eIt holds well on a clean surface, but sun, heat, and road vibration can loosen any adhesive over time. If yours starts to lift, switch to the screw-on mount for a permanent hold and seal around the screws on exterior surfaces.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy does leveling my RV matter?\u003c\/summary\u003e\n    \u003cp\u003eAn absorption refrigerator needs to sit near level to cool properly, slide-outs and doors operate better, and you'll sleep a lot more comfortably. A permanent level makes getting there quick.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco Level-RV EZ Level, Bubble Type, Side-to-Side and Front-to-Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e25505\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717255059\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eLevel-RV EZ Level\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLevel Type\u003c\/th\u003e\n\u003ctd\u003eBubble\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSide-to-Side Leveling\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFront-to-Rear Leveling\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Method\u003c\/th\u003e\n\u003ctd\u003eSelf-adhesive backing or screw-on\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eRVs, travel trailers, and campers\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePower Source\u003c\/th\u003e\n\u003ctd\u003eNone required (spirit level)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the Camco 25505 show both side-to-side and front-to-rear level?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It has two bubble indicators in one gauge, one for side-to-side and one for front-to-rear, so you can check both directions without moving the level around.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I mount the Level-RV EZ Level?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You've got two options. Peel and stick it with the self-adhesive backing for a tool-free install, or screw it on for a permanent hold. Many owners use the adhesive to find the right spot first, then add screws once it's dialed in.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Where's the best place to mount a bubble level on my camper?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Pick a flat surface that represents the coach floor and that you can see while positioning the rig, like the front A-frame area or near the entry door. Avoid panels that flex, and clean the surface before mounting.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need to calibrate it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Set your baseline once. Park the RV on ground you know is level, mount the gauge, and confirm both bubbles read center. Every future setup gets compared to that baseline.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it need batteries or power?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's a bubble spirit level, so there's nothing to charge or replace. Just glance at it and read.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a single level or a set?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This is the single-unit version, one gauge that reads both axes. You can add more if you want a level on multiple corners of the rig.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the easiest way to level my RV with this?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Check side-to-side first and drive up onto blocks or ramps under the low-side wheels until that bubble centers. Then use your tongue jack or landing gear to center the front-to-rear bubble. Chock the wheels and drop your stabilizers.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will the adhesive hold up outdoors?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It holds well on a clean surface, but sun, heat, and road vibration can loosen any adhesive over time. If yours starts to lift, switch to the screw-on mount for a permanent hold and seal around the screws on exterior surfaces.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why does leveling my RV matter?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"An absorption refrigerator needs to sit near level to cool properly, slide-outs and doors operate better, and you'll sleep a lot more comfortably. A permanent level makes getting there quick.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45064791588957,"sku":"2008786","price":73.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_fed3abff-9d67-490d-b049-187ea2b96973.jpg?v=1789613390","url":"https:\/\/nvnmarine.com\/products\/camco-25505-level-rv-ez-level-rv-bubble-level","provider":"NVN Marine","version":"1.0","type":"link"}