{"product_id":"camco-25084-camper-mounting-tape-30ft-truck-cap-seal","title":"Camco 25084 Camper Mounting Tape, 30ft Truck Cap Seal","description":"\u003cp class=\"nvn-hero\"\u003eCamco's Camper Mounting Tape is the self-adhesive vinyl foam that seals the gap between your truck cap and the bed rails. One 30-foot roll, 1-1\/4 inches wide and 3\/16 inch thick, in black. It keeps dust, drafts, and water out, and it cushions the shell so you're not listening to rattles every time you hit a bump.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you've ever dropped a truck cap or canopy straight onto bare bed rails, you already know what happens next. Road grime works its way in. Rain finds the gap on the highway. And every seam in the pavement sends a rattle up through the shell. Camco's Camper Mounting Tape is the fix, and it's about as simple as gear gets. It's a self-adhesive vinyl foam that you run along the bed rail before you set the shell down, and it seals out the dust, drafts, and water that a bare metal-on-fiberglass joint lets through.\u003c\/p\u003e\n\u003cp\u003eThe roll is 30 feet long, 1-1\/4 inches wide, and 3\/16 inch thick, in black. That length is enough to do a large camper or a full canopy with room to work, so you're not splicing pieces halfway down the second rail. The width gives you a real sealing surface across the top of the rail, and the 3\/16-inch thickness is the part people underrate. That bit of foam cushions the shell against the metal, and that's what quiets the rattles and vibration you'd otherwise hear on washboard roads and gravel.\u003c\/p\u003e\n\u003cp\u003eInstall is straightforward. Clean the bed rail first so the adhesive grabs. A wipe with a bit of rubbing alcohol and a few minutes to dry is plenty. Then peel the backing and lay the foam down the length of the rail, pressing as you go. Run it around the front bed panel too if that's where your gap is. Set the cap or canopy down on top, clamp it down the way you normally would, and the foam compresses into a weathertight seal. No special tools. You can knock it out in the driveway in an afternoon.\u003c\/p\u003e\n\u003cp\u003eIt's worth being clear about what this tape does and doesn't do. It seals and it cushions. It is not what holds your shell on. Your cap clamps or tie-downs still do that job, and you'll want them snug. What the tape adds is the weather seal and the vibration buffer between two hard surfaces that would otherwise grind and let water past. Think of it the same way you'd think of the gasket on a hatch. The latch holds it shut, the gasket keeps it dry.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anybody running a topper, a canopy, or a slide-in style shell on a pickup and tired of a dusty, drippy, rattly bed. It's a common first job right after you buy a used cap, since the old foam is usually crushed flat or gone entirely by the time a shell changes hands. It also earns its keep if you haul a boat's worth of gear back there and want it to stay dry on the run to the ramp. Black keeps it low-key, so it disappears into the shadow line under the rail instead of standing out.\u003c\/p\u003e\n\u003cp\u003eOne 30-foot roll covers most full-size trucks. If you've got a long bed and a tall canopy with a lot of perimeter, measure your rails first and grab a second roll so you're not stuck short on the last corner. The foam trims easily with a utility knife or a good pair of scissors, so working around corners and around tie-down pockets is no trouble.\u003c\/p\u003e\n\u003cp\u003eThe material is the self-adhesive vinyl foam Camco builds this tape from, and it's meant to live outside. It handles the sun, the rain, and the temperature swings a truck bed sees without giving up its seal. Black hides road dust better than a light foam would, and it tucks into the shadow line under the rail so nobody notices it's there. Put it on once. You won't think about it again until the day you pull the shell and lay down a fresh strip.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e30-foot roll length seals the rails on most full-size truck caps and canopies in one shot\u003c\/li\u003e\n  \u003cli\u003e1-1\/4-inch width gives a full sealing surface across the top of the bed rail\u003c\/li\u003e\n  \u003cli\u003e3\/16-inch foam thickness cushions the shell to quiet rattles and road vibration\u003c\/li\u003e\n  \u003cli\u003eSelf-adhesive backing peels and sticks, so there are no clips, fasteners, or special tools\u003c\/li\u003e\n  \u003cli\u003eVinyl foam construction seals out dust, drafts, rain, and road grime\u003c\/li\u003e\n  \u003cli\u003eBlack color tucks into the shadow line under the rail and hides road dust\u003c\/li\u003e\n  \u003cli\u003eTrims with a utility knife or scissors to work around corners and tie-down pockets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Camco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does Camco's Camper Mounting Tape do?\u003c\/summary\u003e\n    \u003cp\u003eIt's a self-adhesive vinyl foam that seals the gap between a truck cap or canopy and the pickup bed rails. It keeps out dust, drafts, and water while cushioning the shell against rattles.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long is the roll, and will it cover my truck?\u003c\/summary\u003e\n    \u003cp\u003eThe roll is 30 feet long, which is enough to seal the rails on most full-size truck caps and canopies. If you run a long bed with a lot of perimeter, measure first and consider a second roll.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the tape's dimensions?\u003c\/summary\u003e\n    \u003cp\u003eIt's 1-1\/4 inches wide and 3\/16 inch thick, on a 30-foot roll. The color is black.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes this tape hold my cap onto the truck?\u003c\/summary\u003e\n    \u003cp\u003eNo. It seals and cushions. Your cap clamps or tie-downs still hold the shell down. Think of the tape as the gasket, not the latch.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I install it?\u003c\/summary\u003e\n    \u003cp\u003eClean the bed rail so the adhesive grabs, peel the backing, and press the foam down the length of the rail. Set the cap on top and clamp it down. The foam compresses into a weathertight seal.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need any special tools?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's peel-and-stick. A utility knife or scissors is handy for trimming around corners and tie-down pockets, and a little rubbing alcohol helps clean the rail first.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it quiet the rattles from my topper?\u003c\/summary\u003e\n    \u003cp\u003eThat's a big part of the job. The 3\/16-inch foam cushions the shell against the metal rail, so you get less rattle and vibration on rough roads.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is it and will it show?\u003c\/summary\u003e\n    \u003cp\u003eIt's black, so it tucks into the shadow line under the rail and stays out of sight. Black also hides road dust better than a light-colored foam.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it on a used cap that already had foam?\u003c\/summary\u003e\n    \u003cp\u003eYes. Peel off the old crushed foam, clean the rail, and lay down a fresh strip. It's a common first job after buying a used shell.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eCamco 25084 Camper Mounting Tape, 30 ft x 1-1\/4 in x 3\/16 in, Black\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCamco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e25084\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014717250849\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e30 Feet\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e1-1\/4 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e3\/16 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSelf-Adhesive Vinyl Foam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAdhesive Type\u003c\/th\u003e\n\u003ctd\u003eSelf-Adhesive (Peel-and-Stick)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eSeals gaps between a pickup truck cap or camper and the bed rails\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeals Against\u003c\/th\u003e\n\u003ctd\u003eDust, Drafts, and Water\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does Camco's Camper Mounting Tape do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a self-adhesive vinyl foam that seals the gap between a truck cap or canopy and the pickup bed rails. It keeps out dust, drafts, and water while cushioning the shell against rattles.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long is the roll, and will it cover my truck?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The roll is 30 feet long, which is enough to seal the rails on most full-size truck caps and canopies. If you run a long bed with a lot of perimeter, measure first and consider a second roll.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the tape's dimensions?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's 1-1\/4 inches wide and 3\/16 inch thick, on a 30-foot roll. The color is black.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does this tape hold my cap onto the truck?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It seals and cushions. Your cap clamps or tie-downs still hold the shell down. Think of the tape as the gasket, not the latch.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I install it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Clean the bed rail so the adhesive grabs, peel the backing, and press the foam down the length of the rail. Set the cap on top and clamp it down. The foam compresses into a weathertight seal.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need any special tools?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's peel-and-stick. A utility knife or scissors is handy for trimming around corners and tie-down pockets, and a little rubbing alcohol helps clean the rail first.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it quiet the rattles from my topper?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"That's a big part of the job. The 3\/16-inch foam cushions the shell against the metal rail, so you get less rattle and vibration on rough roads.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is it and will it show?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's black, so it tucks into the shadow line under the rail and stays out of sight. Black also hides road dust better than a light-colored foam.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it on a used cap that already had foam?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Peel off the old crushed foam, clean the rail, and lay down a fresh strip. It's a common first job after buying a used shell.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Camco","offers":[{"title":"Default Title","offer_id":45082131398749,"sku":"2010228","price":17.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_87aa0597-778e-4dae-9d89-282adc5d67d2.jpg?v=1790028858","url":"https:\/\/nvnmarine.com\/products\/camco-25084-camper-mounting-tape-30ft-truck-cap-seal","provider":"NVN Marine","version":"1.0","type":"link"}