Camco

Camco 22915 Heated Drinking Water Hose, 12 Ft, 5/8 In

SKU: 2011526 · UPC: 014717229159 · MPN: 22915
★★★★★ 4.7 · 0 reviews
Authorized dealer
$349.99
or 4 payments of $87.49 with Affirm · See disclosures
In stock — Ships today Pickup Next-Day · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$349.99
02 · Overview

Camco 22915 Heated Drinking Water Hose, 12 Ft, 5/8 In — Product description

The Camco 22915 Heated Drinking Water Smart Hose connects your RV or boat to a community water supply and keeps the line from freezing. It's 12 feet long with a 5/8 inch internal diameter, threaded ends, and a -20 degree Fahrenheit rating.

Freezing temps have a way of finding the one soft spot in your water setup. For a lot of us it's the hose between the dock or campground spigot and the boat or rig. A regular hose goes stiff, then slushy, then solid, and you're hauling jugs. The Camco Heated Drinking Water Smart Hose is built for that exact problem. It's a 12 foot heated hose with a 5/8 inch internal diameter, threaded on the ends for a standard city water hookup, and rated to -20 degrees Fahrenheit.

Here's what it's made to do. It connects an RV or a boat to a community water supply through a threaded connection. That's the everyday hookup at a campground pedestal, a marina slip with a water bib, or a seasonal site where the water stays on well into the cold months. The heating is there to keep the water in the line from freezing when the thermometer drops. Camco lists it as a drinking water hose, so it's meant to feed the freshwater side of your plumbing, not just rinse the deck.

The 5/8 inch internal diameter matters more than people think. Hose bore is what sets how much water you can move at a given supply pressure. A 5/8 inch line is the size most boaters and RVers already run for fresh water, so you're not downsizing the flow just to get freeze protection. If your current hose is 5/8 inch, this one drops right into the same spot.

The 12 foot length is a deliberate call. It suits a short run from a spigot that sits close to your inlet, which is common at a lot of slips and campsites. If your spigot is farther away, think it through before you buy. Extra reach is best handled with a separate drinking water hose, and you'll want to keep the heated section where the freeze risk is worst. We'd rather you know that up front than discover it on a 15 degree morning.

A few honest notes on how a heated hose behaves. It needs power to do its job, so a dead pedestal or a tripped breaker turns it back into a normal unheated line. The heat runs along the hose itself, so the spigot end and the fitting at your boat or rig can still freeze if they're left bare. Wrap or insulate those spots. Coil the hose loosely when you store it and when it's in use, because tight bends and crushed sections are where hoses of every kind wear out first.

Pressure is the other thing to plan for. Threaded city water connections can see more pressure than your onboard plumbing likes, particularly at marinas. A pressure regulator at the spigot is cheap insurance for your freshwater system, and it's a good habit with any hose you connect to a community supply. We don't have a published pressure rating for this hose in our source data, so we won't quote one. Check the manufacturer's paperwork if that number matters for your setup.

Who is this for? The winter RVer who stays put at a site through a hard freeze. The boater who keeps a boat in the water through the cold months and needs fresh water aboard. The seasonal dock owner who's tired of draining and recoiling a hose every night. It's a stationary, powered-site solution, so it's a better fit for places where shore power and a water hookup sit side by side than for offshore trips or unpowered moorings.

What it isn't: it's not a replacement for good winter habits. Drain what you can, protect the exposed ends, and don't count on any hose to carry you through a deep, long freeze without checking on it. Think of the heat as a buffer against the nights that dip below freezing, with the -20 degree Fahrenheit rating as the number to size your expectations against.

We list this under Camco's manufacturer part number 22915. If you're matching it to a hose you already own or sorting out which length you need, that number and the 12 foot length are the two to check. Questions on fit or on how it'll work with your pedestal and plumbing? Ask the crew. We'd rather help you pick the right setup than sell you the wrong one.

Key Features

  • 12 foot hose length covers a short run from spigot to inlet.
  • 5/8 inch internal diameter, the common size for fresh water hookups.
  • Threaded connection for standard community water supply spigots.
  • Heated line to keep water from freezing in cold weather.
  • Rated to -20 degrees Fahrenheit for hard winter conditions.
  • Drinking water hose designed to feed an RV or boat freshwater system.
  • Camco manufacturer part number 22915 for easy matching and reordering.

Why Buy from NVN Marine

  • Authorized Camco reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Next-Day) $349.99
03 · The numbers

Technical specifications

Title Used To Connect RV/ Boat To Community Water Supplier With Threaded Connection; Heated; 5/8 Inch Internal Diameter; 12 Foot Length; Rated To -20 Degrees Fahrenheit
Brand Camco
Manufacturer Part Number 22915
UPC 014717229159
Product Type Heated Drinking Water Hose
Internal Diameter 5/8 Inch
Length 12 Foot
Connection Type Threaded
Heated Yes
Rated Temperature -20 Degrees Fahrenheit
Intended Use Connects an RV or boat to a community water supply
Water Type Drinking Water
04 · Before you buy

Frequently asked questions

What is the length and inside diameter of this hose?

It's 12 feet long with a 5/8 inch internal diameter.

What temperature is it rated for?

Camco rates it to -20 degrees Fahrenheit.

Is it a drinking water hose?

Yes. It's listed by the distributor as a heated drinking water hose, meant to connect an RV or boat to a community water supply.

What kind of connection does it use?

It's a threaded connection, made for standard threaded city water spigots.

Does it need power?

It's a heated hose, so it needs power to keep the water from freezing. If the pedestal loses power, it behaves like an unheated hose. Check Camco's paperwork for the electrical details.

Will the spigot and boat inlet still freeze?

They can. The heat runs along the hose, so wrap or insulate the exposed fittings at both ends.

Do I need a pressure regulator?

We recommend one. Community water supplies, especially at marinas, can run higher pressure than onboard plumbing is happy with. We don't have a pressure rating for this hose to quote.

Is 12 feet enough?

It suits a short run. If your spigot is far from your inlet, plan on a separate drinking water hose for extra reach, and keep the heated section where freezing is the biggest risk.

Can I use it on a boat and an RV?

Yes. It's listed for connecting either an RV or a boat to a community water supply.

What is the part number?

The Camco manufacturer part number is 22915.

05 · Customer voices

Customer reviews