{"product_id":"bulldog-500244-trailer-jack-replacement-part-2k-5k-lb","title":"Bulldog 500244 Trailer Jack Replacement Part | 2K-5K lb","description":"\u003cp class=\"nvn-hero\"\u003eThe Bulldog 500244 is a genuine replacement part for Bulldog trailer jacks rated 2,000 to 5,000 pounds. It's built for jacks that use a 2-inch inner tube and stands 2.1 inches tall. When a part wears out at the ramp or in the yard, you swap this in and keep your jack working instead of buying a whole new one.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eTrailer jacks live a hard life. They crank up and down every trip, sit out in the weather, take road grime and salt spray off the ramp, and eventually a part gives out. When that happens on a Bulldog jack, you don't have to scrap the whole thing. The Bulldog 500244 is a genuine replacement part that gets your jack back in service.\u003c\/p\u003e\n\u003cp\u003eThis one fits Bulldog jacks rated for 2,000 to 5,000 pounds of capacity. It's sized for jacks that use a 2-inch inner tube, and it stands 2.1 inches in height. It's a removable part, so the swap is straightforward with basic hand tools. Before you order, check two things on your jack: the capacity rating stamped on it and the size of the inner tube. If you're in that 2,000 to 5,000 pound range with a 2-inch tube, this is your part.\u003c\/p\u003e\n\u003cp\u003eBulldog has been an industry name in towing and trailering for a long time. Their jacks, couplers, and gooseneck gear are built heavy-duty and get used by manufacturers and the military, so when you're replacing a worn piece, staying with a genuine Bulldog component keeps the fit and the strength where the factory set them. A generic substitute might get close, but the tolerances on a load-bearing jack part matter.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Boat trailer owners, utility trailer owners, anybody running a Bulldog jack in that mid-capacity range who's got one part worn out and the rest of the jack still solid. It's a lot cheaper to fix the one piece than to pull the whole jack and re-mount a new one. And it gets you back on the water, or back on the road, without a full teardown.\u003c\/p\u003e\n\u003cp\u003eIf you're not sure this is the exact piece your jack needs, measure your inner tube and confirm the capacity first. Get those two numbers right and you're set.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eGenuine Bulldog part, MPN 500244, so the fit and strength match the factory jack\u003c\/li\u003e\n  \u003cli\u003eFits Bulldog jacks rated 2,000 to 5,000 lb capacity\u003c\/li\u003e\n  \u003cli\u003eSized for jacks with a 2-inch inner tube\u003c\/li\u003e\n  \u003cli\u003e2.1-inch height keeps it matched to the original part\u003c\/li\u003e\n  \u003cli\u003eRemovable design swaps in with basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Bulldog reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the Bulldog 500244 fit?\u003c\/summary\u003e\n    \u003cp\u003eIt fits Bulldog trailer jacks rated for 2,000 to 5,000 pounds that use a 2-inch inner tube. The part stands 2.1 inches in height. Check your jack's capacity rating and inner tube size before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a genuine Bulldog part?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's Bulldog manufacturer part number 500244, so it matches the fit and strength of the original jack component.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I know if it fits my jack?\u003c\/summary\u003e\n    \u003cp\u003eMeasure the inner tube on your jack, it needs to be 2 inches, and confirm the jack is rated between 2,000 and 5,000 pounds. If both match, this is the right part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it work on a boat trailer jack?\u003c\/summary\u003e\n    \u003cp\u003eYes, as long as it's a Bulldog jack in the 2,000 to 5,000 pound range with a 2-inch inner tube. Boat and utility trailer jacks in that class use this part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it removable?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's a removable part, so you can swap it out with basic hand tools instead of replacing the whole jack.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy replace one part instead of the whole jack?\u003c\/summary\u003e\n    \u003cp\u003eIf the rest of your jack is still solid, replacing the single worn piece is quicker and cheaper than pulling and re-mounting a new jack. You keep the mount and hardware you already have.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eBulldog 500244 Trailer Jack Replacement Part\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBulldog\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e500244\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e086693002446\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePart Type\u003c\/th\u003e\n\u003ctd\u003eReplacement Part\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits Jack Capacity\u003c\/th\u003e\n\u003ctd\u003e2,000 to 5,000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInner Tube Size\u003c\/th\u003e\n\u003ctd\u003e2 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e2.1 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRemovable\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the Bulldog 500244 fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It fits Bulldog trailer jacks rated for 2,000 to 5,000 pounds that use a 2-inch inner tube. The part stands 2.1 inches in height. Check your jack's capacity rating and inner tube size before ordering.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a genuine Bulldog part?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's Bulldog manufacturer part number 500244, so it matches the fit and strength of the original jack component.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I know if it fits my jack?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Measure the inner tube on your jack, it needs to be 2 inches, and confirm the jack is rated between 2,000 and 5,000 pounds. If both match, this is the right part.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it work on a boat trailer jack?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, as long as it's a Bulldog jack in the 2,000 to 5,000 pound range with a 2-inch inner tube. Boat and utility trailer jacks in that class use this part.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it removable?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's a removable part, so you can swap it out with basic hand tools instead of replacing the whole jack.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why replace one part instead of the whole jack?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"If the rest of your jack is still solid, replacing the single worn piece is quicker and cheaper than pulling and re-mounting a new jack. You keep the mount and hardware you already have.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Bulldog","offers":[{"title":"Default Title","offer_id":45076410171485,"sku":"2009661","price":28.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_92ba0919-a58e-4fe0-8b1f-fff6bfe323d6.jpg?v=1789886133","url":"https:\/\/nvnmarine.com\/products\/bulldog-500244-trailer-jack-replacement-part-2k-5k-lb","provider":"NVN Marine","version":"1.0","type":"link"}