Bulldog 500244 Trailer Jack Replacement Part | 2K-5K lb
Bulldog 500244 Trailer Jack Replacement Part | 2K-5K lb — Product description
The Bulldog 500244 is a genuine replacement part for Bulldog trailer jacks rated 2,000 to 5,000 pounds. It's built for jacks that use a 2-inch inner tube and stands 2.1 inches tall. When a part wears out at the ramp or in the yard, you swap this in and keep your jack working instead of buying a whole new one.
Trailer jacks live a hard life. They crank up and down every trip, sit out in the weather, take road grime and salt spray off the ramp, and eventually a part gives out. When that happens on a Bulldog jack, you don't have to scrap the whole thing. The Bulldog 500244 is a genuine replacement part that gets your jack back in service.
This one fits Bulldog jacks rated for 2,000 to 5,000 pounds of capacity. It's sized for jacks that use a 2-inch inner tube, and it stands 2.1 inches in height. It's a removable part, so the swap is straightforward with basic hand tools. Before you order, check two things on your jack: the capacity rating stamped on it and the size of the inner tube. If you're in that 2,000 to 5,000 pound range with a 2-inch tube, this is your part.
Bulldog has been an industry name in towing and trailering for a long time. Their jacks, couplers, and gooseneck gear are built heavy-duty and get used by manufacturers and the military, so when you're replacing a worn piece, staying with a genuine Bulldog component keeps the fit and the strength where the factory set them. A generic substitute might get close, but the tolerances on a load-bearing jack part matter.
Who's this for? Boat trailer owners, utility trailer owners, anybody running a Bulldog jack in that mid-capacity range who's got one part worn out and the rest of the jack still solid. It's a lot cheaper to fix the one piece than to pull the whole jack and re-mount a new one. And it gets you back on the water, or back on the road, without a full teardown.
If you're not sure this is the exact piece your jack needs, measure your inner tube and confirm the capacity first. Get those two numbers right and you're set.
Key Features
- Genuine Bulldog part, MPN 500244, so the fit and strength match the factory jack
- Fits Bulldog jacks rated 2,000 to 5,000 lb capacity
- Sized for jacks with a 2-inch inner tube
- 2.1-inch height keeps it matched to the original part
- Removable design swaps in with basic hand tools
Why Buy from NVN Marine
- Authorized Bulldog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Bulldog 500244 Trailer Jack Replacement Part |
|---|---|
| Brand | Bulldog |
| Manufacturer Part Number | 500244 |
| UPC | 086693002446 |
| Part Type | Replacement Part |
| Fits Jack Capacity | 2,000 to 5,000 lb |
| Inner Tube Size | 2 inch |
| Height | 2.1 inch |
| Removable | Yes |
Frequently asked questions
What does the Bulldog 500244 fit?
It fits Bulldog trailer jacks rated for 2,000 to 5,000 pounds that use a 2-inch inner tube. The part stands 2.1 inches in height. Check your jack's capacity rating and inner tube size before ordering.
Is this a genuine Bulldog part?
Yes. It's Bulldog manufacturer part number 500244, so it matches the fit and strength of the original jack component.
How do I know if it fits my jack?
Measure the inner tube on your jack, it needs to be 2 inches, and confirm the jack is rated between 2,000 and 5,000 pounds. If both match, this is the right part.
Will it work on a boat trailer jack?
Yes, as long as it's a Bulldog jack in the 2,000 to 5,000 pound range with a 2-inch inner tube. Boat and utility trailer jacks in that class use this part.
Is it removable?
Yes. It's a removable part, so you can swap it out with basic hand tools instead of replacing the whole jack.
Why replace one part instead of the whole jack?
If the rest of your jack is still solid, replacing the single worn piece is quicker and cheaper than pulling and re-mounting a new jack. You keep the mount and hardware you already have.
