Bulldog 500240 Weld-On Swivel Jack Mount 2 In
Bulldog 500240 Weld-On Swivel Jack Mount 2 In — Product description
The Bulldog 500240 is a weld-on swivel mount that lets a trailer jack pivot up and out of the way for travel. It's built for a 2 inch outer diameter jack tube with a 5/8 inch pin hole, using the same tough, trusted construction Bulldog puts into all their trailer hardware.
If you're rebuilding a trailer tongue or replacing a worn-out jack bracket, the Bulldog 500240 is the weld-on swivel mount that gets you back on the road. It's a male pipe mount sized for a 2 inch outer diameter jack tube, so it slides in clean and welds solid to the frame.
The swivel design is the whole point here. Pull the 5/8 inch pin, swing the jack up and out of the way, drop the pin back in, and you're ready to tow. No more dragging a fixed jack on the ramp or scraping it on a steep driveway. When it's time to unhitch, swing it back down and crank.
This is a replacement-grade part, so it's a straight fit for anyone servicing an existing Bulldog setup or building a custom tongue from scratch. You'll need to weld it on, so plan for a welder or a shop. Once it's on, it's on for good. Bulldog builds this gear for the kind of duty that military and manufacturers trust, so it holds up to real trailering.
Key Features
- Weld-on mount for a permanent, no-slip attachment to the trailer frame
- 2 inch male pipe mount fits a 2 inch outer diameter jack tube
- 5/8 inch pin hole for the swivel pin
- Swivel design lets the jack pivot up and out of the way for towing
- Bulldog heavy-duty construction, tough and trusted for real trailer duty
Why Buy from NVN Marine
- Authorized Bulldog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | 2 Inch Male Pipe Mount; Swivel Jack; Weld-On Mount; 5/8 Inch Pin Hole Diameter; 2 Inch Outer Diameter |
|---|---|
| Brand | Bulldog |
| Manufacturer Part Number | 500240 |
| UPC | 086693002408 |
| Mount Type | Weld-On, 2 Inch Male Pipe Mount |
| Jack Type | Swivel |
| Pin Hole Diameter | 5/8 Inch |
| Outer Diameter | 2 Inch |
Frequently asked questions
What size jack tube does the Bulldog 500240 fit?
It's a 2 inch male pipe mount sized for a 2 inch outer diameter jack tube.
How does this mount attach to the trailer?
It's a weld-on mount. You'll need to weld it to the frame, so plan for a welder or a shop.
What's the pin hole size?
The pin hole is 5/8 inch in diameter for the swivel pin.
Does this let the jack swivel up for travel?
Yes. Pull the pin, swing the jack up and out of the way, then drop the pin back in before you tow.
