BPS Marine PRO-6 Ultrasonic Antifouling System 24VDC
BPS Marine PRO-6 Ultrasonic Antifouling System 24VDC — Product description
The BPS Marine PRO-6 is a six-transducer ultrasonic antifouling system that protects hulls up to 75ft, plus the drives, rudders, and strainers paint can't reach. This 24VDC version installs with epoxy, no thru-hulls, and runs on its own once it's wired in.
The BPS Marine PRO-6 24VDC is a six-transducer ultrasonic antifouling system for boats with a lot of underwater surface to protect. One control module runs six transducers, and a single system is rated to cover a hull up to 75ft in length. For bigger boats, BPS Marine says you can combine additional systems. This is the 24 volt version, so it's built for boats with a 24VDC house system. A 12VDC version of the system exists too, so check your battery bank before you order.
Here's how it works. The system sends high-frequency ultrasonic waves through the hull and the drives, creating a microscopic barrier of resonance. That barrier discourages biofouling from attaching in the first place, which is a different job than scrubbing it off after it's grown. The PRO-6 uses a multi-frequency sweep from 20kHz to 42kHz. It's chemical-free, so nothing leaches into the water, and that matters in marinas with strict environmental rules.
The part boaters tend to like most is what it can reach. Paint only covers what you can get a roller on. Ultrasonic waves travel through the hull and into complex parts that are hard to paint and clean, like stern drives, sea strainers, and rudders. BPS Marine also positions the PRO-6 for boats under 60ft with pods or stern drives, because one system can cover the entire boat, drives included. So you're not stacking up separate fixes for the hull and the running gear.
Installation is more approachable than you'd guess. There are no thru-hulls. The transducers mount on the hull surface using the epoxy that's in the box. Each transducer has 15ft of attached cable, and the kit adds three more 15ft extension cables, so you've got room to reach the control module from the farther corners of the boat. The control module has an integrated power cable and connects with a simple 2-wire hookup to your battery bank or distribution panel. Take your time with the layout before you mix any epoxy. Where each transducer sits matters, and the printed installation and operation manual in the package is your guide.
Power draw is modest. BPS Marine lists average draw at 1.5Ah, and transducer strength at 120W. Once it's wired in, it runs on its own. There's no schedule to follow and no routine upkeep listed. The idea is fit and forget, and the payoff shows up over a season or two. On a 24 volt boat that's a small load for a system that's working around the clock. Plan the wire run to the battery bank or distribution panel, keep it tidy, and you're done with the electrical side.
What does the payoff look like? BPS Marine points to a few things. A cleaner hull makes less drag, so you protect your fuel economy and top speed. Bottom paint can last longer, and you may need fewer expensive haul-outs. If you pay a diver every month to clean the hull, that bill can shrink too. None of that is a promise for every boat or every waterway, since fouling pressure varies a lot from one slip to the next. But for a boat that sits in warm, busy water, it's worth a hard look.
What's in the package? You get the PRO-6 control module with its integrated power cable, six submersible ultrasonic transducers with 15ft of cable each, three additional 15ft extension cables, two epoxy kits, and the printed manual. One heads-up before you buy. The manufacturer notes this product may not be returned to the original point of purchase, and any issues go to BPS Marine directly. If you've got questions about fit or voltage, ask our crew first. We'd rather sort it out before the box ships.
Key Features
- Six submersible ultrasonic transducers, each with 15ft of cable, to cover hulls up to 75ft in length
- 24V DC system built for boats with a 24VDC house system
- Multi-frequency ultrasonic sweep from 20kHz to 42kHz to keep growth from attaching
- No thru-hulls needed, transducers epoxy to the hull surface using the two included epoxy kits
- Three additional 15ft extension cables included for longer runs to the control module
- Integrated power cable on the control module for a simple 2-wire hookup to your battery bank or distribution panel
- Average power draw of 1.5Ah, so it's easy on the house bank
- Reaches stern drives, sea strainers, and rudders that bottom paint can't cover
- Chemical-free operation that doesn't leach pollutants into the water
- Printed installation and operation manual included
Why Buy from NVN Marine
- Authorized BPS Marine reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | BPS Marine PRO-6 6-Transducer Ultrasonic Antifouling System - 24VDC |
|---|---|
| Brand | BPS Marine |
| Manufacturer Part Number | 24V-PRO-6 |
| UPC | 703670216381 |
| Voltage | 24V DC |
| Number of Transducers | 6 |
| Average Power Draw | 1.5Ah |
| Transducer Strength | 120W |
| Transducer Cable Length | 15ft per transducer |
| Frequency | Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) |
| Hull Coverage | Up to 75ft in length |
| Extension Cables Included | 3x 15ft |
| Epoxy Kits Included | 2 |
| Weight | 19.55 lb |
| Package Dimensions (L x W x H) | 16 x 14 x 6 in |
| Category | Antifouling Systems |
Frequently asked questions
What size boat does the PRO-6 cover?
A single PRO-6 system is rated for hulls up to 75ft in length. BPS Marine says you can combine additional systems for larger boats. It's also positioned for boats under 60ft with pods or stern drives, so one system covers the whole boat.
Is this the 12V or 24V version?
This one is the 24VDC version. The part number is 24V-PRO-6. If your boat runs a 12 volt system, ask us before ordering so we can point you to the right version.
How does ultrasonic antifouling work?
The system emits high-frequency ultrasonic waves through the hull and drives, creating a microscopic barrier of resonance. That discourages biofouling from attaching to the hull in the first place. The PRO-6 sweeps across multiple frequencies from 20kHz to 42kHz.
Do I need to drill holes in the hull?
No. There are no thru-hulls. The transducers are installed on the hull surface using the epoxy provided in the package.
How long are the transducer cables?
Each of the six transducers has 15ft of cable attached. The package also includes three additional 15ft extension cables.
How much power does it use?
BPS Marine lists average power draw at 1.5Ah. The control module wires to your battery bank or distribution panel with a simple 2-wire connection.
What's included in the package?
One PRO-6 control module with integrated power cable, six submersible ultrasonic transducers with 15ft of cable, three additional 15ft extension cables, two epoxy kits, and one printed installation and operation manual.
Does it need regular maintenance?
BPS Marine describes it as fit and forget, with no scheduled maintenance listed once it's installed.
Will it protect drives and rudders, or just the hull?
The waves resonate through the hull and through complex parts that are hard to paint and clean, such as stern drives, sea strainers, and rudders.
Is it safe for the environment?
It's chemical-free and doesn't leach pollutants into the water, so it suits marinas with strict environmental rules.
Can I return it if it doesn't work out?
The manufacturer notes this product may not be returned to the original point of purchase. Contact BPS Marine directly with any issues or concerns, and ask our crew any pre-purchase questions before ordering.