BPS Marine

BPS Marine PRO-4 4-Transducer Ultrasonic Antifouling 24VDC

SKU: 112024 · UPC: 703670216367 · MPN: 24V-PRO-4
★★★★★ 4.7 · 0 reviews
Authorized dealer Free Shipping
$2,624.00
or 4 payments of $656.00 with Affirm · See disclosures
In stock — Ships today Pickup Next-Day · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$2,624.00
02 · Overview

BPS Marine PRO-4 4-Transducer Ultrasonic Antifouling 24VDC — Product description

The BPS Marine PRO-4 is a 24VDC ultrasonic antifouling system with four transducers that protects hulls up to 60ft, plus drives and rudders. It bonds to the hull with epoxy, needs no thru-hulls, and runs chemical-free on a 1Ah average draw.

If you've ever hauled a boat and found a beard of slime and barnacles where your bottom paint used to be, you know why antifouling matters. The BPS Marine PRO-4 4-Transducer Ultrasonic Antifouling System (24VDC) goes after that problem a different way. Instead of a coating that wears off, it sends ultrasonic waves through the hull so growth has a hard time getting a foothold in the first place.

This is the 24-volt version of the PRO-4. It's built around a single control module with an integrated power cable and four submersible ultrasonic transducers, each with 15ft of cable. A single system is meant to protect hulls up to 60ft in length. Have a bigger boat? The manufacturer says you can combine additional systems to cover larger vessels. Got a smaller boat with a drive and a rudder you'd like to protect too? The PRO-4 can be tasked with protecting drives and rudders as well.

Here's how it works. The system emits high-frequency ultrasonic waves through the hull and drives, creating a microscopic barrier of resonance. Those waves repel biofouling before it ever attaches. It runs a multi-frequency ultrasonic sweep algorithm covering 20kHz to 42kHz, and each transducer is rated at 120W of strength. Average power draw is just 1Ah, so it's not going to be the thing that drains your house bank at the dock.

Installation is more approachable than you'd expect. There are no thru-hulls. The transducers mount directly to the hull surface using the epoxy kit that's in the box, so you aren't drilling holes below the waterline. Each transducer comes with 15ft of signal cable, and two additional 15ft extension cables are included for the longer runs back to the controller. The control module runs off your boat's existing house battery with a simple 2-wire connection to the battery bank or distribution panel. A printed installation and operation manual comes with it. Plan your transducer layout before you mix any epoxy, because that's the step you can't easily undo.

One thing we like is that ultrasonic protection reaches places paint struggles with. Stern drives, sea strainers, and rudders are tough to paint well and a pain to scrub. The manufacturer says the waves resonate through those complex parts too, which is a big reason owners look at a system like this for the hard-to-reach spots.

It's also a chemical-free approach. Nothing leaches into the water, which matters if your marina has strict environmental rules. The frequencies used are outside the hearing range of marine mammals and humans, so you won't hear it running either.

What do you get for the effort? A cleaner hull means less drag, and the manufacturer points to better fuel efficiency and top speed from keeping the hull smooth. It can also extend the life of your bottom paint and cut down on how often you need a haul-out. If you pay a diver for monthly hull cleanings, the savings can add up. Once it's installed, the system runs automatically with no scheduled maintenance.

Who's it for? Owners of 24-volt boats up to 60ft who are tired of the annual bottom-job routine and want something that works around the clock. It suits boats that sit in the slip for long stretches, where growth builds fastest. If your boat runs on a 12-volt system, you'll want to make sure you're looking at the right voltage version before you order. This one is the 24VDC unit, part number 24V-PRO-4.

A couple of honest notes. Ultrasonic antifouling is a hull-protection tool that you install once and leave running, so the layout of your transducers matters. Take your time with placement and follow the included manual. And because this product may not be returned to the original point of purchase, per the manufacturer, reach out to us or the manufacturer directly with any questions before you buy. We're happy to help you sort out whether the PRO-4 fits your boat.

Key Features

  • 24V DC system with an average power draw of 1Ah, so it's easy on your house bank
  • 4 submersible ultrasonic transducers with 15ft of cable each for flexible placement around the hull
  • Protects hulls up to 60ft in length, and multiple systems can be combined for larger vessels
  • Multi-frequency ultrasonic sweep from 20kHz to 42kHz for broad coverage
  • 120W transducer strength to push protection through hulls, drives, and rudders
  • No thru-hulls required. Transducers bond to the hull surface with the included epoxy kit
  • 2 additional 15ft extension cables included for longer runs to the controller
  • Control module with integrated power cable hooks up with a simple 2-wire connection
  • 100% chemical-free, so nothing leaches pollutants into the water
  • Runs automatically with no scheduled maintenance once installed

Why Buy from NVN Marine

  • Authorized BPS Marine reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Next-Day) $2,624.00
03 · The numbers

Technical specifications

Title BPS Marine PRO-4 4-Transducer Ultrasonic Antifouling System - 24VDC
Brand BPS Marine
Manufacturer Part Number 24V-PRO-4
UPC 703670216367
Voltage 24V DC
Average Power Draw 1Ah
Transducer Strength 120W
Number of Transducers 4
Transducer Cable Length 15ft per transducer
Additional Extension Cables 2 x 15ft
Frequency Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
Maximum Hull Length per System 60ft
Mounting Epoxy to hull surface, no thru-hulls
Weight 12.55 lb
Package Dimensions (L x W x H) 14.00 x 14.00 x 5.00 in
04 · Before you buy

Frequently asked questions

How long a boat can one PRO-4 system protect?

A single PRO-4 system can provide ultrasonic antifouling protection for hulls up to 60ft in length. For larger vessels, the manufacturer says additional systems can be combined.

What voltage is this PRO-4 version?

This is the 24VDC version, part number 24V-PRO-4. Check your boat's electrical system voltage before ordering so you get the right one.

How much power does the system draw?

Average power draw is 1Ah. The transducers are rated at 120W of strength, and the system runs off your existing house battery.

Do I need to drill thru-hulls to install it?

No. The transducers are installed directly on top of your hull surface using the epoxy kit that's provided, so there are no thru-hull fittings involved.

What's included in the box?

The PRO-4 package includes 1 control module with integrated power cable, 4 submersible ultrasonic transducers with 15ft of cable each, 2 additional 15ft extension cables, 1 epoxy kit, and 1 printed installation and operation manual.

How does ultrasonic antifouling work?

The system emits high-frequency ultrasonic waves through the hull and drives, creating a microscopic barrier of resonance. The waves repel biofouling from attaching before it has a chance to take hold.

Is it safe for marine life and the environment?

The manufacturer states it's 100% chemical-free and doesn't leach pollutants into the water. The frequencies used are outside the hearing range of marine mammals and humans.

Can it protect drives and rudders, not just the hull?

Yes. The PRO-4 can add antifouling protection to hulls, drives, rudders, stabilizers, and more. The manufacturer notes the waves resonate through complex parts like stern drives, sea strainers, and rudders.

How is the controller wired?

The controller runs off your boat's existing house battery. It's a simple 2-wire connection to the battery bank or distribution panel.

Does it need regular maintenance?

The manufacturer says that once it's installed, the system runs automatically with zero scheduled maintenance required.

05 · Customer voices

Customer reviews