BPS Marine BPS-4 4-Transducer Ultrasonic Antifouling System 12VDC
BPS Marine BPS-4 4-Transducer Ultrasonic Antifouling System 12VDC — Product description
The BPS Marine BPS-4 is a four-transducer ultrasonic antifouling system that protects hulls up to 50ft, plus drives, rudders and stabilizers. It's chemical-free, installs with epoxy and no thru-hulls, and draws about 1Ah on average. Fit it once and let it work.
The BPS Marine BPS-4 is a four-transducer ultrasonic antifouling system built for boats that sit in the water and collect growth. It's designed to protect hulls, drives, rudders, stabilizers and more from one control module. A single system covers hulls up to 50ft in length, and you can add more systems if your boat is bigger than that.
Here's how it works. The control module sends a signal to the transducers, and they put high-frequency ultrasonic waves through the hull and drives. That creates a microscopic barrier of resonance that repels biofouling before it ever gets a chance to attach. It's the root cause of the problem, handled before the growth starts. And because it's chemical-free, nothing leaches into the water, which matters in marinas with strict environmental rules.
The system doesn't run on one fixed tone. It uses a multi-frequency sweep algorithm that moves across 20kHz to 42kHz. Each transducer is rated at 60W. The frequencies are outside the hearing range of marine mammals and humans, so you won't hear a thing from the dock or the cabin.
Installation is simpler than most people expect. There are no thru-hulls. You bond the transducers directly to the hull surface using the epoxy kit in the box. Each one comes with 15ft of cable, and two additional 15ft extension cables are included, so you've got room to reach a controller location that isn't right next to the transducer. The control module has an integrated power cable and runs off your house battery. It's a simple 2-wire connection to the battery bank or distribution panel.
Power draw is light. The average is 1Ah, which is easy to live with on a boat that sits on a mooring or stays plugged in at the slip. This listing is the 12VDC version, and the manufacturer lists the voltage range as 12V or 24V DC. If your boat runs 24V, confirm with us before you order and we'll check it for you.
Where does it earn its keep? Drives and rudders are the obvious ones. Stern drives, sea strainers and rudders are tough to paint well and tough to scrub, and ultrasonic waves resonate through those complex parts where a paint brush can't really go. Stabilizers are on the list too. If you've ever paid a diver to clean a hull every month, you already know where this is headed.
A cleaner hull means less drag, and less drag means better fuel economy and a better top speed. The manufacturer also says the system extends the life of your bottom paint and cuts down on how often you have to haul out. That's a claim about paint life, not a promise that you can skip paint altogether, so plan around what your own boat and waters demand.
Once it's in, it's a fit and forget kind of gear. The system runs automatically and the manufacturer lists zero scheduled maintenance. The package gives you the BPS-4 control module with its power cable, four submersible ultrasonic transducers with 15ft of cable each, the two extra extension cables, the epoxy kit and a printed installation and operation manual.
Who is it for? Boat owners who keep a hull in the water most of the year and are tired of scraping, painting and paying for dive cleanings. Cruisers, sportfishers and center consoles with drives or outboards that sit wet all season are the classic fit. The BPS-4 is meant for a hull up to 50ft, so if your boat is smaller or larger, ask the crew and we'll help you sort out the right system before you order. Honest advice beats a return trip to the dock.
Key Features
- Four submersible ultrasonic transducers, 60W each, to cover hulls, drives, rudders and stabilizers from one system
- Covers hulls up to 50ft in length, with additional systems available for larger boats
- Multi-frequency sweep from 20kHz to 42kHz so the signal isn't stuck on one tone
- No thru-hulls needed. Transducers bond to the hull surface with the included epoxy kit
- 15ft of cable on each transducer plus two additional 15ft extension cables for easier routing
- Simple 2-wire hookup to your house battery or distribution panel
- Average power draw of just 1Ah, easy on the house bank
- 100% chemical-free, so nothing leaches into the water
- Frequencies sit outside the hearing range of marine mammals and humans
- Zero scheduled maintenance once it's installed
- Helps protect hard-to-paint spots like stern drives, sea strainers and rudders
- Printed installation and operation manual included
Why Buy from NVN Marine
- Authorized BPS Marine reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | BPS Marine BPS-4 4-Transducer Ultrasonic Antifouling System - 12VDC |
|---|---|
| Brand | BPS Marine |
| Manufacturer Part Number | BPS-4 |
| UPC | 703670216275 |
| Number of Transducers | 4 |
| Voltage | 12V or 24V DC |
| Average Power Draw | 1Ah |
| Transducer Strength | 60W |
| Cable Length | 15ft per transducer |
| Extension Cables | 2x 15ft |
| Frequency | Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) |
| Hull Length Coverage | Up to 50ft |
| Mounting | Epoxy to hull surface, no thru-hulls |
| Power Connection | 2-wire connection to battery bank or distribution panel |
| Epoxy Kit | Included |
| Manual | Printed installation and operation manual included |
| Weight | 9.4 lb |
| Package Dimensions (L x W x H) | 12.75 x 12.25 x 4.00 in |
Frequently asked questions
What is an ultrasonic transducer?
It's the small submersible unit that sends the ultrasonic signal into the hull. The BPS-4 includes four of them, each rated at 60W and each with 15ft of cable.
How big a boat does one BPS-4 cover?
One BPS-4 system can provide ultrasonic antifouling protection for hulls up to 50ft in length. For larger vessels, it can be combined with additional systems.
What's included in the box?
You get the BPS-4 control module with an integrated power cable, four submersible ultrasonic transducers with 15ft of cable each, two additional 15ft extension cables, an epoxy kit and a printed installation and operation manual.
Do I need to drill any thru-hulls?
No. The transducers are installed directly on top of your hull surface using the provided epoxy, so there are no thru-hulls.
How does it connect to power?
It's a simple 2-wire connection to your battery bank or distribution panel, running off your house battery. The control module comes with an integrated power cable.
How much power does it draw?
The manufacturer lists an average power draw of 1Ah.
Does it work on 24V boats?
This listing is the 12VDC version. The manufacturer's specifications list voltage as 12V or 24V DC. If you have a 24V boat, check with us before ordering so we can confirm the right model.
Is it safe for marine life?
The manufacturer says the frequencies used are outside the hearing range of marine mammals and humans. The system is also chemical-free and doesn't leach pollutants into the water.
Can it protect my drives and rudders?
Yes. The BPS-4 can be tasked with protecting drives and rudders, and the manufacturer lists stern drives, sea strainers and rudders among the hard-to-paint areas the ultrasonic waves can reach.
Does it replace bottom paint?
The manufacturer describes it as extending the life of your bottom paint and reducing how often you need to haul out. It isn't described as a paint replacement, so plan accordingly for your boat and waters.
What frequencies does it use?
It uses a multi-frequency ultrasonic sweep algorithm that covers 20kHz to 42kHz.
Does it need regular maintenance?
The manufacturer lists zero scheduled maintenance once it's installed. The system runs automatically.