Bluewater DT04-2P 2 Position DT Male Connector, Wedge Lock
Bluewater DT04-2P 2 Position DT Male Connector, Wedge Lock — Product description
The Bluewater DT04-2P is a 2 position DT male connector with a wedge lock included. It's rated for 13 amps per contact and mates with the DT06-2S female plug. It's a solid pick when you want a weather resistant connection you can unplug for service.
The Bluewater DT04-2P is a 2 position DT series male connector. It's the male half of the pair, the receptacle side, and it's built to mate with the matching DT06-2S female plug. If you've ever wired a bilge pump, a set of nav lights, or a sensor feed on a boat, you already know why a proper connector beats a twisted splice and a wad of tape. This one gives you a secure, weather resistant link for a two circuit run in a compact housing.
Let's start with the part everybody asks about. It's Deutsch compatible. Bluewater lists this connector as fully interchangeable with matching Deutsch DT parts. That matters when you're repairing or extending a harness that's already on the boat. If what you're replacing is a 2 position DT connector, this one speaks the same language and lines up with the same family of plugs. The listing describes the contacts as DT male, 14AWG, in solid machined or stamped crimp style.
Now the electrical side. You get 13 amps continuous per contact. With two positions, that's two circuits, or one power and ground pair. For a lot of everyday boat wiring, that's plenty. Think accessory feeds, small pumps, lighting, and sensor lines. But do the math before you commit. Add up the load on the circuit and make sure it sits comfortably under that 13 amp rating. If you're feeding something big, like a windlass or a thruster, this isn't the connector for the job. Those loads need hardware built for much higher current.
The wedge lock is included, and it's worth understanding what it does. Once your terminals are seated in the housing, the wedge lock goes in and secures them in place. That gives you a positive, vibration resistant lock. Out on the water, you've got engine vibration, hull slap, and a lot of bouncing around in a chop. A terminal that can back out of its cavity will eventually cost you a circuit at the worst possible time. The wedge lock is there so that doesn't happen.
Bluewater describes the build as harsh environment ready. That means a rugged housing, corrosion resistant contacts, and a reliable locking mechanism. It's aimed at marine, automotive, and industrial wiring, so it's not a one trick part. Salt air and spray are tough on electrical connections. A good connector helps, but it doesn't replace good habits. Use the right crimp tool for your terminals. Give every crimp a firm tug test before you close it up. Leave a little slack and a drip loop in the harness so water has somewhere else to go.
Here's what to know before you order. This is the male half only. The DT06-2S female plug that it mates with is a separate part, so plan on picking that up too. And one more honest note. The product information we have doesn't spell out whether the contacts ship loaded in the housing. If you're building a connection from scratch, check with our crew first so you're not stuck at the bench with a housing and no pins. We'd rather answer a quick question than see you make a second trip to the parts bin.
Common places this kind of connector earns its keep include console accessory wiring, bilge and livewell pump leads, lighting runs, trailer harness work, and gauge or sensor feeds. Anywhere you want a connection you can unplug for service without cutting wire, this style makes sense. Pop it apart at the dock, swap what needs swapping, and plug it back in. No splicing, no heat shrink every time you change something.
It's a small part, and it's easy to overlook. But a bad connection is one of the most common reasons a boat circuit acts up. Spending a couple of bucks on the right connector, installed properly, is cheap insurance. If you're not sure whether the 2 position DT is the right fit for your harness, give us a call. We're happy to talk it through with you.
Key Features
- 2 position DT series male receptacle, built to mate with the DT06-2S female plug
- 13A continuous per contact, enough for most accessory, pump, and lighting circuits
- Wedge lock included to secure terminals and resist vibration
- Deutsch compatible and interchangeable with matching DT parts
- Rugged housing and corrosion resistant contacts for harsh environments
- Suited to marine, automotive, and industrial wiring
Why Buy from NVN Marine
- Authorized Bluewater reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Bluewater 2 Position DT Male Connector with Wedge Lock, Deutsch Compatible |
|---|---|
| Brand | Bluewater |
| Manufacturer Part Number | DT04-2P |
| UPC | 810196333413 |
| Series | DT (Deutsch compatible) |
| Positions | 2 |
| Gender | Male (receptacle) |
| Mates With | DT06-2S |
| Current Rating | 13A continuous per contact |
| Contacts | DT male, 14AWG (solid machined or stamped crimp) |
| Wedge Lock | Included |
| Compatibility | Fully interchangeable with matching Deutsch DT parts |
| Category | Electrical |
Frequently asked questions
What does the DT04-2P mate with?
It mates with the DT06-2S female plug. The DT04-2P is the male half, the receptacle side, of a 2 position DT connection.
How much current can it carry?
It's rated for 13 amps continuous per contact. Add up the load on your circuit and keep it comfortably under that number.
Is the wedge lock included?
Yes. The wedge lock comes with it and secures the terminals in the housing for a positive, vibration resistant lock.
Is this the male or female connector?
It's the male half, described as a receptacle. The matching female plug is the DT06-2S.
Is it compatible with Deutsch DT parts?
Bluewater lists it as fully interchangeable with matching Deutsch DT parts, so it works with the same 2 position DT family.
What wire size do the contacts use?
The listing describes the contacts as DT male, 14AWG, in solid machined or stamped crimp style.
Is it okay to use on a boat?
It's built for harsh environments with a rugged housing and corrosion resistant contacts, and it's aimed at marine, automotive, and industrial wiring. Still route the harness with a drip loop and make solid crimps.
How many positions does it have?
Two. That gives you two circuits, or a power and ground pair.
Does the mating plug come with it?
No. The DT06-2S female plug is a separate part, so order it alongside if you need both halves.
Do the contacts come loaded in the housing?
The product information doesn't say, so we won't promise it. Check with our crew before you order if you're building a connection from scratch.