Bluewater

Bluewater 19mm Pre-Wired Momentary Push Button Switch, Blue Ring

SKU: 1004885 · UPC: 810196333741 · MPN: 9150-2130-506
★★★★★ 4.7 · 0 reviews
Authorized dealer
$25.00
or 4 payments of $6.25 with Affirm · See disclosures
In stock — Ships today Pickup Next-Day · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$25.00
02 · Overview

Bluewater 19mm Pre-Wired Momentary Push Button Switch, Blue Ring — Product description

The Bluewater 9150-2130-506 is a 19mm pre-wired momentary push button switch with a black body and a blue and red LED ring. It's sealed to IP67, rated 10A at 12VDC, and drops into a single 19mm hole. A clean, simple control for horns, thruster triggers, and helm accessories.

The Bluewater 9150-2130-506 is a 19mm pre-wired mechanical push button switch with a black body and a translucent blue illuminated ring. It's a momentary switch, which means the circuit stays on only while you're holding the button down. Let go and it's off. That's exactly what you want for a horn, a spray-down pump, a thruster, a windlass jog, or any control where a latched-on circuit would be a problem.

Bluewater builds this series as low-profile, marine-grade switches for tight dashboards and panels on boats, RVs, and vehicles. The black body blends into a dark dash and doesn't draw the eye in daylight. At night, the ring does the talking. It glows blue when the switch is inactive and turns red when it's active, so you can tell at a glance what's happening without hunting for a label in the dark. We like that kind of feedback on a helm where you're already juggling the wheel, throttle, and a couple of screens.

Wiring is where this one saves you time. It ships pre-wired with a factory-sealed, epoxy-filled 5-wire harness and 6 inch leads, and the leads are color-coded to keep the hookup straightforward. There's no crimping terminals onto the back of a switch in a cramped console. Six inches is short, so plan on splicing in extra length with tinned marine wire and sealed or heat-shrink connectors when the switch sits a ways from your fuse panel or relay. Before you connect anything, check the lead functions against the manufacturer's wiring information so each wire lands where it belongs.

Mounting is a one-hole job. Drill a 19mm hole in material up to 6mm thick, drop the switch in, and secure it. Deburr the edge of the hole so nothing chews on the gasket. If your panel is thicker than 6mm, you'll want to relieve the back side of the hole before it will seat properly. Measure first. It takes ten seconds and saves a ruined panel.

Electrically, the switch is rated 10A at 12VDC. That's plenty for lighting, small pumps, and signaling circuits. It isn't meant to carry a big motor load directly. For a thruster, a windlass, or anything else that pulls serious current, use this button as the trigger for a properly sized relay or solenoid and let the relay carry the load. That's how most helm-side controls on bigger rigs are done anyway, and it keeps heat and voltage drop out of your dash.

Durability is the other half of the story. The sealed design with an integrated gasket carries an IP67 protection rating, which is what you want when spray, rain, and wash-down water are part of the deal on an open boat or a center console. The switch is rated for 500,000 mechanical cycles and 10,000 electrical cycles. The two numbers are different on purpose. Mechanical life is how many times the button can be pressed with no load on it. Electrical life is how many times it can switch a real load at its rated current. In daily use, that's years of presses for something like a horn or a bilge test button.

So where does it fit? Think horn buttons, thruster triggers, anchor light checks, bilge blower or pump test circuits, accessory start buttons, and any panel that needs a spring-return control with a status ring. It also works in RV and vehicle projects where you want the same sealed, low-profile button. What it's not: a latching on/off switch. If you need a control that stays on without being held, you want a different switch type.

One more practical note. The ring color tells you about switch state, not about your load. If you want to confirm a pump or light is actually running, that's a job for a separate indicator on the load side. For the button itself, though, it's a clean, simple, sealed control that's easy to rig up and easy to live with. If you've got questions about whether it suits your circuit, ask our crew before you drill. We'd rather help you get it right the first time.

Key Features

  • 19mm pre-wired mechanical push button, so a single 19mm hole is all the panel work you need.
  • Momentary action, so the circuit stays on only while the button is held. Good for horns, thrusters, and jog controls.
  • Translucent blue LED ring that glows blue when inactive and red when active, easy to read in the dark.
  • Rated 10A at 12VDC for lighting, small pumps, and signaling. Use a relay for heavy loads.
  • Factory-sealed, epoxy-filled 5-wire harness with 6 inch color-coded leads for plug-and-play installation.
  • IP67 protection with an integrated gasket for wet, exposed helm locations.
  • 500,000 mechanical cycles and 10,000 electrical cycles of rated life.
  • Fits panels up to 6mm thick with a low-profile black body that blends into dark dashboards.

Why Buy from NVN Marine

  • Authorized Bluewater reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Next-Day) $25.00
03 · The numbers

Technical specifications

Title Bluewater 19mm Pre-Wired Mechanical Push Button Switch, Momentary, Black Body, Translucent Blue Ring, 6" Leads
Brand Bluewater
Manufacturer Part Number 9150-2130-506
UPC 810196333741
Function (On)/Off momentary
Body Finish Black
Ring Translucent blue LED ring
LED Indicators Blue inactive / Red active
Switch Rating 10A @ 12VDC
Wiring 5-wire, epoxy-sealed
Lead Length 6 in.
Protection Rating IP67
Mechanical Life 500,000 cycles
Electrical Life 10,000 cycles
Mounting Hole 19mm
Maximum Panel Thickness 6mm
Category Electrical
04 · Before you buy

Frequently asked questions

Is this a momentary or a latching switch?

It's momentary. The circuit stays on only while you hold the button down, and it switches off when you let go. If you need a switch that stays on by itself, this isn't the right type.

What do the blue and red ring colors mean?

The translucent ring glows blue when the switch is inactive and red when it's active. It shows switch state, so it's easy to read at night.

How much current can it handle?

The switch rating is 10A at 12VDC. For bigger loads like a thruster or windlass, wire the button to trigger a relay or solenoid and let the relay carry the current.

Is it waterproof?

It has a sealed design with an integrated gasket and an IP67 protection rating, built for wet marine locations. The harness is epoxy sealed too.

What size hole do I need to drill?

Drill a 19mm hole in material up to 6mm thick. Deburr the hole edge so it doesn't damage the gasket.

Does it come pre-wired?

Yes. It has a factory-sealed 5-wire harness with 6 inch leads. The leads are color-coded to simplify wiring, but check the manufacturer's wiring information before you connect them.

How long will it last?

Rated life is 500,000 mechanical cycles and 10,000 electrical cycles. Real-world life under load depends on the current you're switching.

What's the difference between mechanical and electrical life?

Mechanical life counts button presses with no load. Electrical life counts presses while switching a load at rated current, so it's a lower number.

Can I use it on an RV or vehicle?

Yes. Bluewater designs this series for boats, RVs, and vehicles. Just keep the load within the 10A at 12VDC rating.

05 · Customer voices

Customer reviews