{"product_id":"bluewater-9150-1130-506-push-button-switch","title":"Bluewater 9150-1130-506 19mm Pre-Wired Push Button Switch","description":"\u003cp class=\"nvn-hero\"\u003eThe Bluewater 9150-1130-506 is a 19mm pre-wired, latching on\/off push button switch with a black body and a translucent ring that shows blue when off and red when on. It's IP67 sealed with a 6-inch epoxy-sealed harness, so it drops into a tight dash and wires up fast.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThis is the Bluewater 9150-1130-506, a 19mm pre-wired mechanical push button switch with latching on\/off action. Push once and the circuit is on. Push again and it's off. The body is black, so it disappears into a dark dash or switch panel, and the translucent blue ring gives you a clear status light right where you're looking. It ships with a 5-wire harness and 6-inch leads already attached and epoxy sealed, so you're not crimping tiny terminals onto a switch before you can even mount it.\u003c\/p\u003e\n\u003cp\u003eInstallation is about as straightforward as switch work gets. Drill a 19mm hole in material up to 6mm thick, seat the switch, and secure it. The integrated gasket seals against the panel, and the leads are color coded, which takes most of the guesswork out of the wiring. The low-profile design is what makes it a good fit for tight dashboards and panels where a bulky rocker just won't go. Measure your panel thickness before you cut anything. Anything over 6mm is outside the stated range, and it's a lot easier to check first than to fix a bad hole later.\u003c\/p\u003e\n\u003cp\u003eThe ring does more than look good. It shows blue when the switch is inactive and red when it's active. That's useful on a helm at night, or on a crowded panel where you want to read the state of a circuit without leaning in. Just remember the logic before you label anything. Blue doesn't mean on here. Blue means off, and red means the circuit is live. If you're building a panel with several of these, a little label under each one saves a lot of second guessing later.\u003c\/p\u003e\n\u003cp\u003eOn the numbers, the switch is rated 10A @ 12VDC. Protection is IP67, and the sealed design with the integrated gasket is meant for wet marine environments, so it belongs on an open console, a boat's helm, or a trailer-side panel just as much as inside a cabin. Mechanical life is listed at 500,000 cycles and electrical life at 10,000 cycles. Those are two different figures, and the electrical one is the lower number, so keep that in mind if you plan to cycle something under load all day long. For a bilge pump override, a courtesy light, or an accessory feed you flip a handful of times a trip, it's plenty.\u003c\/p\u003e\n\u003cp\u003eA few practical notes from the install side. Six-inch leads are short, which is fine for plug-and-play at the back of a panel but means you'll usually be splicing close behind the dash. Heat-shrink butt connectors and a little strain relief keep vibration from fatiguing the wires over time. If the load you're switching is anywhere near the 10A rating, think about driving a relay with the switch and fusing the supply, rather than pushing the full current through the switch contacts. And confirm that you want latching action before you drill. This one is latching on\/off, not momentary.\u003c\/p\u003e\n\u003cp\u003eOne more honest note. The listing gives a 12VDC rating and doesn't state a 24V rating or any ignition-protection rating, so don't assume either. If your boat runs a 24V system, or you're wiring into a gasoline engine space, check that before you buy.\u003c\/p\u003e\n\u003cp\u003eBluewater builds these for boats, RVs and vehicles, and that range makes sense. It's a compact, clean switch with a visible indicator, a gasket, and a pre-wired harness. If you're tidying up a dash, adding an accessory circuit, or replacing a tired switch on a panel, this one gets the job done without a lot of fuss. It's also easy to spec for a whole panel, since matching switches keep the helm looking tidy and consistent.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e19mm pre-wired push button, so it fits tight dashboards and panels where a rocker won't\u003c\/li\u003e\n  \u003cli\u003eLatching on\/off action, push once for on and again for off\u003c\/li\u003e\n  \u003cli\u003eTranslucent ring shows blue when inactive and red when active, so you can read circuit state at a glance\u003c\/li\u003e\n  \u003cli\u003eEpoxy-sealed 5-wire harness with 6-inch color-coded leads, ready for plug-and-play wiring\u003c\/li\u003e\n  \u003cli\u003eIP67 rating with integrated gasket, built for wet marine environments\u003c\/li\u003e\n  \u003cli\u003e10A @ 12VDC switch rating covers typical accessory circuits\u003c\/li\u003e\n  \u003cli\u003e500,000 mechanical cycles and 10,000 electrical cycles\u003c\/li\u003e\n  \u003cli\u003eMounts in a 19mm hole, in material up to 6mm thick\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Bluewater reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size hole does the Bluewater 9150-1130-506 need?\u003c\/summary\u003e\n    \u003cp\u003eIt needs a 19mm hole. The listing says to drill in material up to 6mm thick.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this switch latching or momentary?\u003c\/summary\u003e\n    \u003cp\u003eIt's latching on\/off. Push once for on, push again for off.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat do the blue and red ring colors mean?\u003c\/summary\u003e\n    \u003cp\u003eThe translucent ring is blue when the switch is inactive and red when it's active.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it waterproof?\u003c\/summary\u003e\n    \u003cp\u003eIt has an IP67 protection rating and an integrated gasket, and it's described as a sealed design for wet marine environments. Use the gasket against the panel when you mount it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the current rating?\u003c\/summary\u003e\n    \u003cp\u003eThe switch rating is 10A @ 12VDC.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come pre-wired?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's a pre-wired, epoxy-sealed 5-wire harness with 6-inch leads. The leads are color coded to simplify wiring.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow thick can the mounting panel be?\u003c\/summary\u003e\n    \u003cp\u003eUp to 6mm. Measure your panel before you drill.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it on a 24V system?\u003c\/summary\u003e\n    \u003cp\u003eThe published rating is 10A @ 12VDC. The listing doesn't give a 24V rating, so we can't confirm it for 24V.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this an ignition-protected switch?\u003c\/summary\u003e\n    \u003cp\u003eThe listing doesn't say it is, so don't assume it. Check before using it in a gasoline engine space.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many cycles is it rated for?\u003c\/summary\u003e\n    \u003cp\u003eMechanical life is 500,000 cycles and electrical life is 10,000 cycles.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eBluewater 19mm Pre-Wired Mechanical Push Button Switch, On\/Off, Black Body, Translucent Blue Ring, 6\" Leads\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBluewater\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e9150-1130-506\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e810196333734\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSwitch Type\u003c\/th\u003e\n\u003ctd\u003eMechanical push button\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eOn\/Off (latching)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBody \/ Face\u003c\/th\u003e\n\u003ctd\u003eBlack body, translucent blue LED ring\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSwitch Diameter\u003c\/th\u003e\n\u003ctd\u003e19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSwitch Rating\u003c\/th\u003e\n\u003ctd\u003e10A @ 12VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Indicators\u003c\/th\u003e\n\u003ctd\u003eBlue inactive \/ Red active\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003e5-wire, epoxy-sealed, 6 in. leads\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProtection Rating\u003c\/th\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMechanical Life\u003c\/th\u003e\n\u003ctd\u003e500,000 cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eElectrical Life\u003c\/th\u003e\n\u003ctd\u003e10,000 cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Hole\u003c\/th\u003e\n\u003ctd\u003e19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePanel Thickness\u003c\/th\u003e\n\u003ctd\u003eUp to 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size hole does the Bluewater 9150-1130-506 need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It needs a 19mm hole. The listing says to drill in material up to 6mm thick.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this switch latching or momentary?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's latching on\/off. Push once for on, push again for off.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What do the blue and red ring colors mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The translucent ring is blue when the switch is inactive and red when it's active.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it waterproof?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It has an IP67 protection rating and an integrated gasket, and it's described as a sealed design for wet marine environments. Use the gasket against the panel when you mount it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the current rating?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The switch rating is 10A @ 12VDC.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come pre-wired?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's a pre-wired, epoxy-sealed 5-wire harness with 6-inch leads. The leads are color coded to simplify wiring.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How thick can the mounting panel be?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Up to 6mm. Measure your panel before you drill.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it on a 24V system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The published rating is 10A @ 12VDC. The listing doesn't give a 24V rating, so we can't confirm it for 24V.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this an ignition-protected switch?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The listing doesn't say it is, so don't assume it. Check before using it in a gasoline engine space.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many cycles is it rated for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Mechanical life is 500,000 cycles and electrical life is 10,000 cycles.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Bluewater","offers":[{"title":"Default Title","offer_id":68055791534173,"sku":"1004886","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/BWE91501130506_001.jpg?v=1795009305","url":"https:\/\/nvnmarine.com\/products\/bluewater-9150-1130-506-push-button-switch","provider":"NVN Marine","version":"1.0","type":"link"}