Bluewater 9060-2113 22mm Programmable Breaker Switch, Momentary
Bluewater 9060-2113 22mm Programmable Breaker Switch, Momentary — Product description
The Bluewater 9060-2113 is a 22mm Off-(On) momentary switch with a programmable circuit breaker built in. Pick one of eight trip settings from 0 to 20A, wire in your horn, spotlight or pump, and skip the separate breaker. It's sealed in SS316 stainless steel and rated IP69K for life on the water.
Some loads on a boat only need power while you're leaning on a button. Horns. Spotlights. Anything you want live for a second or two and dead the moment you let go. The Bluewater 9060-2113 is built for exactly that job. It's a 22mm Off-(On) momentary switch with the circuit breaker built right into the body, so there's no separate breaker to mount, wire and label behind the dash. Fewer parts means fewer connections to corrode, and fewer places for a gremlin to hide when something stops working at the worst possible moment.
The part worth understanding is the programmable breaker. Instead of buying a fixed-amp breaker and hoping you guessed right, you pick the trip point on the switch itself. There are eight selectable settings from 0 to 20A, and you set them with a simple press-and-hold. Wire in a horn, set the trip to suit the load, and you're done. Swap the load later and you can change the setting without pulling anything apart.
Pumps and motors are famous for pulling a big gulp of current the instant they start, and that's what causes nuisance trips on a lot of protection gear. This switch handles 120A surges for 120µs, so those startup spikes ride through instead of killing the circuit. It's rated 20A at 12 to 24VDC, which covers the common 12V systems and the 24V setups too.
At night, you'll appreciate the LED feedback. The backlight sits blue so you can find the switch in the dark, then shifts to red while you're pressing it. That quick color change tells you the circuit is live without having to look anywhere else. It's a small thing, but on a dark helm at 2 AM it's a nice small thing.
Construction is what you'd want out there. The body is sealed SS316 stainless steel, and the switch carries an IP69K rating, so salt spray, washdowns and submersion aren't a worry. Materials are nickel-plated brass and SS316 stainless steel. Mechanical life is rated at 50,000 cycles and electrical life at 10,000 cycles, which is plenty for a switch that's going to get pressed for years of horn blasts and spotlight sweeps.
Installation is straightforward. Drill a 22mm hole in material up to 6mm thick, drop the switch in, and plug it into a Bluewater 22mm harness. One thing to plan for: the 22mm harness, part number 9053-3914, is sold separately, so add it to your order if you don't already have one. We'd rather you know that now than discover it with the panel half drilled.
Where does it fit? Think console panels, helm dashes and switch plates on center consoles, bay boats, pontoons and runabouts, anywhere you've got a 22mm hole or can cut one. It's a good match when you want one compact component doing the work of a switch and a breaker. And because it's momentary, it's not the pick for something you want to latch on and walk away from. For that, you'd want a maintained switch instead.
The Bluewater 9060 Series is designed around the idea that a single 22mm unit can combine an electronic switch and a programmable circuit breaker for pumps, lighting and mission-critical gear. This particular model, 9060-2113, is the momentary version with the blue and red LED behavior described above. Check the part number when you order, because other 9060 Series variants behave differently.
We carry Bluewater gear because it's built for boats, not borrowed from somewhere else. If you've got questions about matching the trip setting to your load or picking the right harness, our crew handles that every day. Ask before you drill. Our crew would much rather talk through the install with you first than hear about a wrong setting after the fact. It's cheaper than a second hole.
Key Features
- Off-(On) momentary action, so the circuit stays live only while you hold the button
- Built-in programmable breaker with eight selectable trip settings from 0 to 20A
- Set the trip point with a simple press-and-hold, no separate breaker to mount
- 120A inrush rating for 120µs, so pump and motor startup spikes don't cause nuisance trips
- 20A at 12 to 24VDC for both 12V and 24V systems
- Blue backlight for night visibility that shifts to red while pressed
- IP69K protection rating handles salt spray, washdowns and submersion
- Sealed SS316 stainless steel body with nickel-plated brass
- Rated for 50,000 mechanical cycles and 10,000 electrical cycles
- Fits a 22mm hole in material up to 6mm thick
Why Buy from NVN Marine
- Authorized Bluewater reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Bluewater 22mm Programmable Breaker Switch, Off-(On) Momentary, Blue/Red LED |
|---|---|
| Brand | Bluewater |
| Manufacturer Part Number | 9060-2113 |
| UPC | 810196331006 |
| Function | Off-(On) momentary with programmable breaker |
| LED Indicators | Blue off / Red while pressed |
| Voltage/Current | 20A @ 12-24VDC |
| Programmable Breaker | 8 selectable settings, 0-20A |
| Inrush Rating | 120A for 120µs |
| Protection Rating | IP69K |
| Material | Nickel-plated brass / SS316 stainless steel |
| Mechanical Life | 50,000 cycles |
| Electrical Life | 10,000 cycles |
| Mounting Hole | 22mm, material up to 6mm thick |
| Connector | Deutsch-style (22mm harness 9053-3914 sold separately) |
| Weight | 0.1 lb |
| Package Dimensions (L x W x H) | 7.00 x 6.00 x 1.00 in |
Frequently asked questions
What does Off-(On) momentary mean?
It means the switch is off at rest and only turns the circuit on while you're holding the button down. Let go and the circuit drops out. That's ideal for horns, spotlights and other loads you only want live for a moment.
How do I set the breaker trip point?
The breaker is programmable with eight selectable settings from 0 to 20A. You set it with a simple press-and-hold on the switch itself. Pick the setting that suits the load you're wiring in.
What voltage and current is it rated for?
The switch is rated 20A at 12 to 24VDC. That covers standard 12V boat systems as well as 24V setups.
Will it trip when a pump or motor starts?
It has an inrush rating of 120A for 120µs, so the brief current spike at startup is handled without a nuisance trip. Pick a trip setting that suits the running load of whatever you're powering.
What do the LED colors mean?
The backlight is blue for night visibility and shifts to red while the switch is pressed. The color change lets you confirm the button is active at a glance.
Is it waterproof?
Yes. It carries an IP69K protection rating and has a sealed SS316 stainless steel body, so it handles salt spray, washdowns and submersion.
What size hole do I need to drill?
You need a 22mm hole in material up to 6mm thick.
Does it come with a wiring harness?
No. You plug it into a Bluewater 22mm harness, and the 9053-3914 harness is sold separately. Add it to your order if you don't already have one.
How long is the switch rated to last?
Mechanical life is rated at 50,000 cycles and electrical life at 10,000 cycles.
Can I use it as a latching on/off switch?
Not this model. The 9060-2113 is a momentary Off-(On) switch, so it only stays on while pressed. If you need a switch that stays on, look at a maintained model in the Bluewater lineup.