Bluewater 9059-7014 22mm 2N1 Rocker Nav/Anchor Light Switch
Bluewater 9059-7014 22mm 2N1 Rocker Nav/Anchor Light Switch — Product description
The Bluewater 9059-7014 is a 22mm 2N1 rocker switch that runs your nav and anchor lights from a single panel cutout. Press the top for both, the bottom for anchor only, and let the color-changing LED tell you which mode you're in. It's sealed in SS316 stainless steel and rated IP69K for life on the water.
Two lights, one hole. On plenty of boats the nav lights and the anchor light each get their own switch, and that eats panel space and makes you think about which one to flip when the sun's going down. The Bluewater 9059-7014 is a 22mm 2N1 rocker that puts both on a single cutout. Press the top of the rocker and you get nav and anchor lights together. Press the bottom and you get the anchor light only. That's the whole idea, and it's a good one.
Here's how it behaves. It's a latching switch, so you press either side once to turn the lights on and press again to turn them off. No holding, no hunting for a second switch. The LED feedback tells you what you've got. The backlight glows blue when the switch is sitting idle, green when nav and anchor are both on, and red when only the anchor light is on. At night that matters. One look at the helm and you know which mode you're in, and you don't have to count on the lights themselves to tell you.
Now the electrical side. This switch handles +12V, and it does it on two outputs. Each channel is rated for 10A, with 20A combined at 12VDC. That's plenty of headroom for a typical set of navigation and anchor lights, but we'd still add up the draw of your actual fixtures before you wire it in. Check the rating on each lamp, size your wire and fuse to match, and you're set. Keep in mind it's a 12V DC switch. It isn't meant for AC circuits, and it isn't a substitute for a breaker or fuse.
The build is what you'd want out on the water. The case is sealed SS316 stainless steel, and the switch carries an IP69K protection rating. Bluewater says it withstands salt spray, washdowns and submersion, which is exactly the abuse a helm panel or console face takes on a boat that gets used hard. The material list calls out nickel-plated brass alongside the SS316 stainless steel. For longevity, it's rated for 50,000 mechanical cycles and 10,000 electrical cycles. Even if you're flipping lights on and off every single trip, that's a lot of seasons.
Installation is simple. Drill a 22mm mounting hole, seat the switch, and plug in a Bluewater 22mm Deutsch-style harness. The matching harness, part number 9053-3914, is sold separately, so add it to your order if you don't already have one on the boat. Because the connector is a plug-in style, the wiring behind the panel stays tidy and a future swap doesn't mean cutting and splicing. If you're building a new panel or cleaning up an old one, a 22mm hole is a common size, so there's a good chance you're already set up for it.
Who's it for? Anyone who wants to clean up the lighting controls on a center console, bay boat, runabout or pilothouse helm without giving up function. If you've got two separate switches for nav and anchor and a panel that's getting crowded, this swaps them for one. It also suits a refit where you're drilling fresh holes and want the neatest layout. And who's it not for? If your lighting runs on a different voltage or you need to switch a negative side, check the +12V spec first. This switch puts +12V out, and that's the job it's built for.
One last thing. We've seen a lot of panels where the switch labels fade or the backlight is too bright to read at night. A color-coded LED that changes with the mode takes care of the guesswork. It's a small detail, but it's the kind of thing you appreciate at 2 AM when you're tucked into an anchorage and want to be sure the right lights are on. If you've got questions about fit or wiring, ask the crew. We're happy to help you sort it out before you drill.
Key Features
- 22mm 2N1 rocker puts nav and anchor lights on a single panel cutout, so you free up switch space
- Top press turns on nav and anchor together, bottom press turns on anchor only
- Latching operation, press either side again to turn the lights off
- LED feedback: blue backlight idle, green with nav and anchor on, red with anchor only
- Dual outputs rated 10A per channel and 20A combined, switching +12V
- IP69K protection rating with a sealed SS316 stainless steel body for salt spray, washdowns and submersion
- 50,000 mechanical cycles and 10,000 electrical cycles rated life
- Plug-in Deutsch-style connector, mating 22mm harness 9053-3914 sold separately
Why Buy from NVN Marine
- Authorized Bluewater reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Bluewater 22mm 2N1 Rocker Nav/Anchor Light Switch, +12V |
|---|---|
| Brand | Bluewater |
| Manufacturer Part Number | 9059-7014 |
| UPC | 810196330979 |
| Function | Latching: Top = Nav + Anchor, Bottom = Anchor only |
| Output | +12V switched |
| LED Indicators | Blue backlight / Green nav + anchor / Red anchor only |
| Voltage/Current | 10A per channel, 20A combined @ 12VDC |
| Protection Rating | IP69K |
| Material | Nickel-plated brass / SS316 stainless steel |
| Mechanical Life | 50,000 cycles |
| Electrical Life | 10,000 cycles |
| Mounting Hole | 22mm |
| Connector | Deutsch-style (22mm harness 9053-3914 sold separately) |
Frequently asked questions
What does each side of the rocker do?
Press the top to turn on the nav and anchor lights together. Press the bottom to turn on the anchor light only.
Is it a latching switch?
Yes. Press either side to turn the lights on, and press that side again to turn them off.
What do the LED colors mean?
The backlight is blue when the switch is idle. It turns green when nav and anchor are both on, and red when only the anchor light is on.
How much current can it handle?
It's rated for 10A per channel and 20A combined at 12VDC. Add up the draw of your lights and size your wire and fuse to suit.
Does it switch positive or negative?
It switches +12V. It's a 12V DC switch and isn't meant for AC circuits.
What size hole do I need to drill?
A 22mm mounting hole.
Does the wiring harness come with it?
No, we'd treat it as sold separately. Bluewater lists the 22mm harness, part number 9053-3914, as a separate item, so order it with the switch if you need one.
Is it waterproof?
It carries an IP69K protection rating and a sealed SS316 stainless steel body. Bluewater says it withstands salt spray, washdowns and submersion.
How long is it rated to last?
Bluewater rates it for 50,000 mechanical cycles and 10,000 electrical cycles.
Can I use it on a boat with separate nav and anchor switches already installed?
Sure. This 2N1 switch replaces the pair with one control, so you'd rewire the two circuits to the two outputs through the harness and free up a cutout.