Bluewater

Bluewater 9059-7002 22mm 2N1 Rocker Switch, Double Momentary

SKU: 1004865 · UPC: 810196330955 · MPN: 9059-7002
★★★★★ 4.7 · 0 reviews
Authorized dealer
$62.00
or 4 payments of $15.50 with Affirm · See disclosures
In stock — Ships today Pickup Next-Day · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$62.00
02 · Overview

Bluewater 9059-7002 22mm 2N1 Rocker Switch, Double Momentary — Product description

The Bluewater 9059-7002 is a 22mm 2N1 rocker switch that gives you momentary up/down control from a single cutout. It switches +12V at 10A per channel, with LED feedback and an IP69K sealed stainless body. It's a clean fit for trim tabs, jack plates, windshield vents, and antenna lifts.

If you've ever tried to run a trim tab, jack plate, or windshield vent from two separate switches, you know how fast a helm panel fills up. The Bluewater 9059-7002 solves that with one 22mm rocker that handles both directions. Press the top and you get output 1. Press the bottom and you get output 2. Let go and everything shuts off. It's a double momentary switch, and that behavior is exactly what up/down gear wants.

The contact pattern is (On)-Off-(On). That means the center position is off, and both ends are spring-return. Nothing latches. You hold it while the tab moves or the plate lifts, and you release when it's where you want it. For anyone who has overshot a trim setting with a latching switch, that's a real relief. You stay in control of every inch of travel.

Each channel is rated 10A, with a combined limit of 20A, switching +12V at 12VDC. That covers the typical loads this switch is meant for, like trim tab actuators, jack plate motors, windshield vents, and antenna lifts. Check the draw on your own actuator before you wire it in. If a motor pulls more than 10A on a channel, this isn't the switch for that circuit. It's that simple, and we'd rather you know up front.

There's one important note on wiring. This switch has no internal reverse polarity. When you're driving linear actuator motors, which need their polarity flipped to change direction, you'll want a reverse polarity relay module in the circuit. The switch sends +12V to whichever output you press, and the relay module handles the direction change. Skip that piece and the actuator won't do what you expect, so plan it into the install from the start.

The LED feedback is easy to read at a glance. A blue backlight keeps the switch findable at night, a green LED shows when output 1 is active, and a red LED shows output 2. On a dark helm at 5 AM, you'll know which way you're driving without squinting at the gear itself. It's a small thing, but it's the kind of detail you appreciate after a few early launches.

Construction is built for the salt. The body is sealed SS316 stainless steel, with nickel-plated brass and SS316 listed as the materials, and the whole switch carries an IP69K protection rating. That's rated for salt spray, washdowns, and submersion. Mechanical life is 50,000 cycles and electrical life is 10,000 cycles, so a switch you touch every time you adjust trim will last a long time on a typical boat.

Installation is straightforward. Drill a 22mm mounting hole in your panel or console and plug in a Bluewater 22mm harness. The harness (9053-3914) is sold separately, so add it to your order if you don't already have one. The connector on the switch is a Deutsch-style type, which keeps the connection sealed and tidy behind the panel. Take your time with the cutout, because a clean 22mm hole makes the whole job easier. Mount it where your thumb falls naturally, since you'll be tapping it often while underway.

Who's it for? Anglers and cruisers who want one compact control for a two-direction accessory. Bass boats with jack plates, center consoles with trim tabs, and boats with power windshield vents or antenna lifts are all natural fits. If you're planning a fresh helm layout around 22mm switches, this one saves a cutout every time you'd otherwise need two. Just remember the harness and the relay module if your accessory is a linear actuator. Get those two details right and you've got a clean, dependable setup that you won't have to think about again.

Key Features

  • Double momentary (On)-Off-(On) rocker, so you get up/down control from a single 22mm cutout
  • Spring-return action in both directions, so trim tabs and jack plates move only while you hold the switch
  • 10A per channel and 20A combined at 12VDC, switching +12V to each output
  • LED feedback with a blue backlight, green for output 1, and red for output 2, easy to read on a dark helm
  • IP69K protection with a sealed SS316 stainless steel body, ready for salt spray and washdowns
  • Nickel-plated brass and SS316 stainless steel materials
  • Rated for 50,000 mechanical cycles and 10,000 electrical cycles
  • Fits a 22mm mounting hole, with the matching 22mm harness (9053-3914) sold separately

Why Buy from NVN Marine

  • Authorized Bluewater reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Next-Day) $62.00
03 · The numbers

Technical specifications

Title Bluewater 22mm 2N1 Rocker Switch, Double Momentary (On)-Off-(On), +12V
Brand Bluewater
Manufacturer Part Number 9059-7002
UPC 810196330955
Function (On)-Off-(On) double momentary
Actuator Style Rocker
Output +12V switched
LED Indicators Blue backlight / Green output 1 / Red output 2
Voltage/Current 10A per channel, 20A combined @ 12VDC
Protection Rating IP69K
Material Nickel-plated brass / SS316 stainless steel
Mechanical Life 50,000 cycles
Electrical Life 10,000 cycles
Mounting Hole 22mm
Connector Deutsch-style (22mm harness 9053-3914 sold separately)
Reverse Polarity Protection None
04 · Before you buy

Frequently asked questions

What does (On)-Off-(On) mean?

It's a double momentary switch. The center position is off, and pressing the top or bottom turns on that output only while you hold it. Release it and the switch returns to off.

What can I control with this switch?

Bluewater lists it as ideal for trim tabs, jack plates, windshield vents, and antenna lifts. Those are all accessories where you want to move something up or down and then stop.

What size hole do I need to drill?

You'll need a 22mm mounting hole.

How much current can it handle?

The rating is 10A per channel and 20A combined at 12VDC. The switch outputs +12V on each side.

Does it have reverse polarity protection?

No. This switch has no internal reverse polarity. If you're driving linear actuator motors, use a reverse polarity relay module in the circuit.

Is the wiring harness included?

No. The 22mm harness (9053-3914) is sold separately. Plan to order it along with the switch if you don't already have one.

What do the LED colors mean?

The switch has a blue backlight. The LED turns green for output 1 and red for output 2, so you can see which direction is active.

How waterproof is it?

The switch carries an IP69K protection rating, with a sealed SS316 stainless steel body. It's built to handle salt spray, washdowns, and submersion.

How long will it last?

Mechanical life is rated at 50,000 cycles and electrical life at 10,000 cycles.

05 · Customer voices

Customer reviews