Bluewater 9059-2213 22mm Momentary Horn Switch, Red LED
Bluewater 9059-2213 22mm Momentary Horn Switch, Red LED — Product description
The Bluewater 9059-2213 is a 22mm momentary horn switch with a red LED that lights while the horn is on. It's rated 20A @ 12-24VDC, handles horn inrush surges, and carries an IP69K rating for salt spray and washdowns. Plug-in connector makes the install quick.
The Bluewater 9059-2213 is a 22mm momentary switch made for horn circuits. Press and hold, the horn sounds. Let go, it stops. That's the whole job, and it's one you want done right every single time, because a horn switch that sticks or quits is the kind of problem you discover when another boat is closing on you.
This one is an Off-(On) momentary design, so it never latches on by accident. There's a red LED built in that lights red while the horn is on, which gives you a quick visual check at the helm that the circuit is live. It's a small thing, but anyone who's chased a dead horn with a multimeter in a dark cockpit will appreciate knowing right away whether the switch is actually doing its part.
Horn circuits can be hard on switches. Horns, like pumps and motors, pull a hard surge the instant they're energized. Bluewater built inrush protection into the 9059 Series, and this switch is rated for a 120A inrush for 120µs, so it handles that startup spike without nuisance trips. Continuous rating is 20A @ 12-24VDC, which covers the common 12V and 24V systems on boats.
Then there's the environment. The body is nickel-plated brass and SS316 stainless steel, and it carries an IP69K protection rating. Bluewater says it stands up to salt spray, washdowns and submersion, and the 9059 Series is salt-spray tested with a 20g shock resistance rating. That matters on an open console, a flybridge, or a center console where the switch sees spray, sun and the occasional hose-down at the dock. If you've ever replaced a corroded switch every other season, you know why that's worth paying attention to.
Longevity is spelled out too. Bluewater rates the mechanical life at 50,000 cycles and the electrical life at 10,000 cycles. A horn switch doesn't get pressed that often in a normal boating life, so those numbers leave plenty of room.
Installation is straightforward. You drill a 22mm mounting hole in your panel or console, then plug in a matching 22mm harness. This switch uses a proprietary Deutsch-style plug-in connector, which keeps the wiring clean and makes swapping a switch later a quick job instead of a re-wire. Just know that the harness isn't part of this listing. Bluewater's 22mm harness, part number 9053-3914, is sold separately, so add it to your order if you don't already have one.
A couple of practical notes before you buy. This is the red LED version, so the indicator lights red while the horn is on. It's a momentary horn switch, not a latching on/off switch, so don't pick it for something you need to stay on. And since the switch body only fits a 22mm hole, measure your panel cutout or drill a fresh one before you commit.
Placement is worth a minute of thought. A horn switch should be somewhere you can find by feel, without taking your eyes off the water. Many boaters put it close to the throttle or wheel, away from the switches they use for lights and pumps, so there's no mix-up in a hurry. Because the connector is plug-in, you can test fit the switch in the panel and check your reach from the helm seat before you finish the wiring.
If you're refitting an older helm, this is a clean way to replace a worn, corroded or flaky horn button with a sealed one that's built for salt air. Same goes for a new build or a console you're re-laying out. Wire the horn through the switch, plug in the harness, and you're done.
Not sure it's the right fit for your circuit or panel? Send us a message with what you're working on. We're boat people, and we'll tell you straight whether it'll do the job.
Key Features
- 22mm Off-(On) momentary action, press and hold to sound the horn, release to stop
- Red LED indicator lights red while the horn is on, so you can confirm the circuit at a glance
- 20A @ 12-24VDC rating covers both 12V and 24V boat systems
- Inrush protection rated 120A for 120µs, so horn startup surges don't cause nuisance trips
- IP69K protection rating for salt spray, washdowns and submersion
- Nickel-plated brass and SS316 stainless steel construction for marine duty
- Plug-in Deutsch-style connector for fast, clean wiring and easy switch swaps
- 50,000 mechanical cycles and 10,000 electrical cycles
- Fits a standard 22mm mounting hole
- 9059 Series build with salt-spray testing and 20g shock resistance
Why Buy from NVN Marine
- Authorized Bluewater reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Bluewater 22mm Electronic Momentary Horn Switch, Red LED |
|---|---|
| Brand | Bluewater |
| Manufacturer Part Number | 9059-2213 |
| UPC | 810196330870 |
| Function | Off-(On) momentary horn switch |
| LED Indicators | Red while pressed |
| Voltage/Current | 20A @ 12-24VDC |
| Inrush Rating | 120A for 120µs |
| Protection Rating | IP69K |
| Material | Nickel-plated brass / SS316 stainless steel |
| Mechanical Life | 50,000 cycles |
| Electrical Life | 10,000 cycles |
| Mounting Hole | 22mm |
| Connector | Deutsch-style (22mm harness 9053-3914 sold separately) |
| Shock Resistance | 20g |
| Series | 9059 Series |
Frequently asked questions
How does the Bluewater 9059-2213 horn switch work?
It's an Off-(On) momentary switch. Press and hold it to sound the horn, and release it to turn the horn off. It doesn't latch on.
What does the red LED do?
The red LED lights red while the horn is on, so you can see at the helm that the switch is working.
What size hole does this switch need?
It mounts in a 22mm hole. Drill a 22mm mounting hole in your panel or console.
Does it come with a wiring harness?
No. It uses a plug-in Deutsch-style connector, and the matching 22mm harness, part number 9053-3914, is sold separately.
What voltage and current is it rated for?
The rating is 20A @ 12-24VDC, so it works on both 12V and 24V systems.
Is it waterproof?
It carries an IP69K protection rating, and the sealed SS316 stainless steel body is built to handle salt spray, washdowns and submersion.
What is inrush protection and why does it matter on a horn?
Inrush is the brief surge of current when a load like a horn, pump or motor first switches on. This switch is rated for a 120A inrush for 120µs, so it handles that surge without nuisance trips.
How long is the switch rated to last?
Bluewater rates the mechanical life at 50,000 cycles and the electrical life at 10,000 cycles.
What is it made of?
The switch uses nickel-plated brass and SS316 stainless steel.
Is this a latching switch I can leave on?
No. It's a momentary Off-(On) switch made for horn circuits, so it only stays on while you hold it down.