{"product_id":"bluewater-9059-2118-22mm-momentary-signal-switch","title":"Bluewater 9059-2118 22mm Momentary Signal Switch","description":"\u003cp class=\"nvn-hero\"\u003eThe Bluewater 9059-2118 is a 22mm momentary signal switch built to send a low-current input to your digital switching system. It has an IP69K sealed stainless steel body, independent blue and red LEDs, and a plug-in connector, so it's quick to rig up and tough enough for the helm.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you've got a digital switching system at the helm, you already know the panel is only half the story. Something has to tell the system what you want, and that's where the Bluewater 9059-2118 comes in. It's a 22mm momentary signal switch. You press it, it closes a dry contact, you let go, and it opens again. Simple, and exactly what a digital switching input expects to see.\u003c\/p\u003e\n\u003cp\u003eLet's be clear about what this switch is, because it matters for how you wire it. It's a signal-level switch. It sends a low-current input to your digital switching system. It does not power a load directly, and it has no built-in circuit protection. The signal current rating is under 240mA and the voltage rating is up to 30VDC. So no, you shouldn't wire a bilge pump or a windlass through it. Let the switching system's outputs handle the load, and let this button do the asking.\u003c\/p\u003e\n\u003cp\u003eThe body is sealed and built for the helm of a boat that actually gets used. You get a stainless steel body with an IP69K protection rating, which means salt spray, washdowns, and spray from every angle aren't a problem. The material is listed as nickel-plated brass and SS316 stainless steel. That's the kind of build you want on a dash that sees sun, salt, and a deckhand with a hose.\u003c\/p\u003e\n\u003cp\u003eThe lighting is worth a mention. There are two independent LEDs inside, one blue and one red, and they're DayBright units so you can still read them in glare. The blue LED ties to your panel backlighting, so the button stays findable at night without lighting up the whole console. The red LED shows when the virtual switch is active. And when both LEDs are on at once, they blend into a purple glow. After dark, you can tell at a glance what's on and what's off.\u003c\/p\u003e\n\u003cp\u003eInstallation is about as painless as switch work gets. Drill a 22mm mounting hole in your panel, drop the switch in, and plug in a matching 22mm harness. The connector is a proprietary Deutsch-style plug, so there's no crimping and splicing at the back of the switch. If you ever need to swap a switch out, you unplug it and plug in the new one. The harness is not included. It's the Bluewater 22mm harness, part number 9053-3914, and it's sold separately, so add it to your order if you don't already have one.\u003c\/p\u003e\n\u003cp\u003eWhere does this fit? Anywhere you're running a digital switching system and need physical buttons to trigger its inputs. Think of a helm station on a center console where you want a dedicated button for a function you use constantly. Or a cabin panel on a cruiser where you'd rather have a real button under your thumb than a touchscreen menu three taps deep. Because it's momentary, it's a natural for functions that trigger on a press, rather than staying latched.\u003c\/p\u003e\n\u003cp\u003eWhere doesn't it fit? Any circuit where you want a button that carries real current. If you need to switch a load directly, you want a different type of switch, one with the amp rating and protection to match. The same goes for anything needing a latching on\/off action. This one's Off-(On) momentary. It returns to off the moment you let go.\u003c\/p\u003e\n\u003cp\u003eA few honest notes before you order. This listing is the momentary signal version with the 9059-2118 part number. Bluewater sells related 22mm switches with different actions and protection, so check that the part number matches what your system needs. The switch ships as a single unit. You'll want to confirm that your digital switching system accepts a dry contact input, because that's what this switch provides. If you're not sure, ask our crew before you drill the panel. We'd rather help you pick the right button than process a return.\u003c\/p\u003e\n\u003cp\u003eIt's a small part of the helm, but it's the part you touch every trip. A solid feeling, sealed, lit button that does one job well is worth having. Pair it with the right harness and your digital switching setup, and you've got a clean, repeatable way to trigger functions without reaching for a screen.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e22mm mounting hole, so it drops into a standard drilled panel cutout\u003c\/li\u003e\n  \u003cli\u003eOff-(On) momentary dry contact, so it closes only while you hold it\u003c\/li\u003e\n  \u003cli\u003eBuilt for digital switching system inputs, with signal current under 240mA\u003c\/li\u003e\n  \u003cli\u003eVoltage rated up to 30VDC for 12V and 24V boat systems\u003c\/li\u003e\n  \u003cli\u003eIndependent blue and red DayBright LEDs, readable in glare and dim at night\u003c\/li\u003e\n  \u003cli\u003eBlue LED ties to panel backlighting, red shows when the virtual switch is active\u003c\/li\u003e\n  \u003cli\u003eIP69K protection rating, sealed against washdowns and salt spray\u003c\/li\u003e\n  \u003cli\u003eStainless steel body in nickel-plated brass and SS316 stainless steel\u003c\/li\u003e\n  \u003cli\u003ePlug-in Deutsch-style connector, so there's no splicing behind the panel\u003c\/li\u003e\n  \u003cli\u003eSignal-level only with no built-in circuit protection, so it never carries the load itself\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Bluewater reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the Bluewater 9059-2118 a momentary switch?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's an Off-(On) momentary dry contact switch. Press and hold to close the signal contacts, and release to open them.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use this switch to power a pump or other load directly?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's a signal-level switch with no built-in circuit protection, and it's rated for low-current signals only, under 240mA. Use it to send an input to your digital switching system, not to switch a load.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat voltage is the switch rated for?\u003c\/summary\u003e\n    \u003cp\u003eThe voltage rating is up to 30VDC.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size hole do I need to drill?\u003c\/summary\u003e\n    \u003cp\u003eA 22mm mounting hole.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the wiring harness included?\u003c\/summary\u003e\n    \u003cp\u003eNo. The switch uses a Deutsch-style connector, and the matching 22mm harness, part number 9053-3914, is sold separately.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow waterproof is it?\u003c\/summary\u003e\n    \u003cp\u003eIt has an IP69K protection rating and a sealed stainless steel body that's built to handle salt spray, washdowns, and submersion.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat do the LEDs do?\u003c\/summary\u003e\n    \u003cp\u003eThere are independent blue and red DayBright LEDs. The blue LED ties to panel backlighting. The red LED shows when the virtual switch is active. With both on, they combine into a purple glow.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat kind of systems does this switch work with?\u003c\/summary\u003e\n    \u003cp\u003eIt's built for digital switching systems that take a low-current dry contact signal input. If you're unsure whether your system accepts a dry contact input, check with our crew before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it a latching or momentary switch?\u003c\/summary\u003e\n    \u003cp\u003eMomentary. It returns to off as soon as you release it, so it isn't suited for a latching on\/off function.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the switch made of?\u003c\/summary\u003e\n    \u003cp\u003eThe listed material is nickel-plated brass and SS316 stainless steel.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eBluewater 22mm Momentary Signal Switch for Digital Switching Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBluewater\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e9059-2118\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e10000521\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eOff-(On) momentary, dry contact\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSignal Current\u003c\/th\u003e\n\u003ctd\u003eLow-current signals only (under 240mA)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003eUp to 30VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Indicators\u003c\/th\u003e\n\u003ctd\u003eIndependent blue and red (DayBright)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProtection Rating\u003c\/th\u003e\n\u003ctd\u003eIP69K\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass \/ SS316 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Hole\u003c\/th\u003e\n\u003ctd\u003e22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eDeutsch-style (22mm harness 9053-3914 sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.08 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackage Dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e4.00 x 2.00 x 1.00 in\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the Bluewater 9059-2118 a momentary switch?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's an Off-(On) momentary dry contact switch. Press and hold to close the signal contacts, and release to open them.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use this switch to power a pump or other load directly?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's a signal-level switch with no built-in circuit protection, and it's rated for low-current signals only, under 240mA. Use it to send an input to your digital switching system, not to switch a load.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What voltage is the switch rated for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The voltage rating is up to 30VDC.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size hole do I need to drill?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A 22mm mounting hole.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the wiring harness included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The switch uses a Deutsch-style connector, and the matching 22mm harness, part number 9053-3914, is sold separately.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How waterproof is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It has an IP69K protection rating and a sealed stainless steel body that's built to handle salt spray, washdowns, and submersion.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What do the LEDs do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"There are independent blue and red DayBright LEDs. The blue LED ties to panel backlighting. The red LED shows when the virtual switch is active. With both on, they combine into a purple glow.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What kind of systems does this switch work with?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built for digital switching systems that take a low-current dry contact signal input. If you're unsure whether your system accepts a dry contact input, check with our crew before ordering.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it a latching or momentary switch?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Momentary. It returns to off as soon as you release it, so it isn't suited for a latching on\/off function.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the switch made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The listed material is nickel-plated brass and SS316 stainless steel.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Bluewater","offers":[{"title":"Default Title","offer_id":68054662283357,"sku":"1004875","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/113515XL.jpg?v=1795001303","url":"https:\/\/nvnmarine.com\/products\/bluewater-9059-2118-22mm-momentary-signal-switch","provider":"NVN Marine","version":"1.0","type":"link"}