Bluewater

Bluewater 9059-1555 22mm Electronic Timer Switch, 1-Min Cycle

SKU: 1004873 · UPC: 10000519 · MPN: 9059-1555
★★★★★ 4.7 · 0 reviews
Authorized dealer
$55.00
or 4 payments of $13.75 with Affirm · See disclosures
In stock — Ships today Pickup Next-Day · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$55.00
02 · Overview

Bluewater 9059-1555 22mm Electronic Timer Switch, 1-Min Cycle — Product description

The Bluewater 9059-1555 is a 22mm electronic switch that works as a plain on/off or as a repeating cycle timer. It runs your load 1 minute on and 2 minutes off, which suits livewell and baitwell pumps. Sealed SS316 stainless body, IP69K, and plug-in wiring.

The Bluewater 9059-1555 is a 22mm electronic timer switch that does two jobs from a single hole in your dash. Use it as a regular on/off switch when you want a load to run steady. Or switch it into timer mode and let it cycle the load for you. It's a good fit for the pumps you want working in the background while you're busy running the boat, fishing, or tying up at the dock. You won't be babysitting it.

Here's how the cycle works. In timer mode the switch runs your load for 1 minute, then shuts it off for 2 minutes, then starts over and keeps repeating. That rhythm is ideal for livewell and baitwell pumps, where you want fresh water moving through the tank without the pump grinding away nonstop all day. Press the switch again and the timer cancels. LED colors in blue, red, green, and yellow show which mode you're in, so a quick glance at the helm tells you what's going on. That's handy at night when you can't see the pump.

Pumps and motors are hard on switches, and it comes down to what happens at startup. The first instant of a motor start pulls far more current than the motor draws once it's running. This switch has inrush protection rated at 120A for 120µs, so pumps and motors start without nuisance trips. Running rating is 20A at 12 to 24VDC, which covers both 12V and 24V boat systems. Check your load's running current before you wire it in. If you're anywhere near the limit, that's a sign to run the load through a relay instead of straight through the switch.

Out on the water, a switch lives a hard life. Salt spray, washdowns, rain, and the occasional dunking all come with the territory. The 9059-1555 has a sealed SS316 stainless steel body and an IP69K waterproof rating. The listed materials are nickel-plated brass and SS316 stainless steel. The 9059 Series is built for demanding marine loads and has been through salt-spray testing and 20g shock resistance, which matters when your boat is pounding through a chop. Mechanical life is rated at 50,000 cycles, and electrical life is rated at 10,000 cycles.

Installation is simple. Drill a 22mm mounting hole, set the switch in place, and plug it in. It uses a proprietary Deutsch-style connector, so there's no stripping and crimping right at the switch. That also means swapping a switch later is a plug-in job, not a rewiring project. One thing to know before you order. The matching 22mm harness, part number 9053-3914, is sold separately. If you don't already have one on the boat, add it to your order so you're not stuck waiting on a part mid-install.

Who's it for? Anyone running a livewell, baitwell, or other pump on a center console, bay boat, or bass boat who's tired of remembering to flip it off and on. Set it and forget it. It's also a clean pick if you're building out a switch panel and want one switch that can handle both a steady load and a timed one. And if you only want a plain switch, it works fine that way too. Just leave the timer alone and use it as an on/off.

A few honest notes. The timer is a fixed cycle of 1 minute on and 2 minutes off, so this isn't a programmable unit. If your load needs a different rhythm, this isn't the one. And as always, match the switch to the load. A 20A rating means 20A at 12 to 24VDC, so size your wire and your fuse or breaker to the pump you're actually running. Do that, and you've got a sealed, plug-in timer switch that does a simple job well and keeps doing it season after season.

Key Features

  • Two modes in one: standard on/off or a repeating cycle timer, so one switch covers both jobs.
  • 1 minute on, 2 minutes off cycle, ideal for livewell and baitwell pumps.
  • Inrush protection handles 120A for 120µs, so pumps and motors start without nuisance trips.
  • 20A at 12 to 24VDC rating covers 12V and 24V boat systems.
  • IP69K waterproof with a sealed SS316 stainless steel body for salt spray, washdowns, and submersion.
  • Blue, red, green, and yellow LEDs show which mode is active at a glance.
  • Plug-in Deutsch-style connector makes wiring fast and switch swaps easy.
  • Salt-spray tested with 20g shock resistance, rated for 50,000 mechanical cycles.

Why Buy from NVN Marine

  • Authorized Bluewater reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Next-Day) $55.00
03 · The numbers

Technical specifications

Title Bluewater 22mm Electronic Timer Switch, On/Off with 1-Minute Cycle Timer
Brand Bluewater
Manufacturer Part Number 9059-1555
UPC 10000519
Function On/Off with repeating timer (1 min on / 2 min off)
LED Indicators Blue / Red / Green / Yellow by mode
Voltage/Current 20A @ 12 to 24VDC
Inrush Rating 120A for 120µs
Protection Rating IP69K
Material Nickel-plated brass / SS316 stainless steel
Mechanical Life 50,000 cycles
Electrical Life 10,000 cycles
Mounting Hole 22mm
Connector Deutsch-style (22mm harness 9053-3914 sold separately)
04 · Before you buy

Frequently asked questions

How does the timer mode work?

In timer mode the switch runs the load for 1 minute, turns it off for 2 minutes, and repeats. Press the switch again to cancel the timer.

Can I use it as a regular on/off switch?

Yes. It works as a standard on/off switch or as a repeating cycle timer, so you can pick whichever you need.

Is it a good choice for a livewell or baitwell pump?

That's what the cycle timer is built for. The 1 minute on and 2 minutes off rhythm suits livewell and baitwell pumps.

What are the voltage and current ratings?

It's rated for 20A at 12 to 24VDC, so it works on 12V and 24V systems.

Will it handle the startup surge from a pump or motor?

It has inrush protection rated at 120A for 120µs, so pumps and motors start without nuisance trips.

How waterproof is it?

It carries an IP69K rating and has a sealed SS316 stainless steel body that handles salt spray, washdowns, and submersion.

What size hole do I need to drill?

A 22mm mounting hole.

Does the wiring harness come with it?

No. The 22mm harness, part number 9053-3914, is sold separately. The switch uses a proprietary Deutsch-style plug-in connector.

Can I change the timer cycle?

No. The cycle is fixed at 1 minute on and 2 minutes off.

How long does the switch last?

Mechanical life is rated at 50,000 cycles and electrical life at 10,000 cycles.

05 · Customer voices

Customer reviews