{"product_id":"bluewater-9057-19mm-momentary-push-button-switch","title":"Bluewater 9057 19mm Momentary Push Button Switch, Blue\/Red LED","description":"\u003cp class=\"nvn-hero\"\u003eBluewater's 9057 Series 19mm push button switch packs marine-grade control into a tight footprint. The SS316 stainless body seals to IP69K, the momentary Off-(On) action suits horns, starters, and trim, and the dual-color LED glows blue for backlight and red when live. This listing is the switch body only.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eWhen panel space runs out but you still need a switch you can trust in salt air, the Bluewater 9057 Series 19mm push button earns its spot. It's a compact momentary control built for the wet, vibrating, corrosive world of a boat's electrical system, and it drops into a single 19mm hole on almost any helm, console, or dash panel up to 6mm thick.\u003c\/p\u003e\n\u003cp\u003eThe body is machined from SS316 stainless steel, the grade that shrugs off salt spray and washdowns instead of pitting after a season. Bluewater seals the switch to an IP69K rating using their Deutsch-style connectors, so it holds up to the high-pressure hose-downs and standing spray that kill lesser buttons. If your install lives in an open bow, under a T-top, or anywhere the weather gets in, that sealed rating is the difference between a switch that lasts and one you're replacing next spring.\u003c\/p\u003e\n\u003cp\u003eThis is a momentary Off-(On) action, which means the circuit is live only while you're pressing. That's exactly what you want for a horn, a trim tab, a starter, an anchor windlass trigger, or any accessory that should fire on demand and stop the second you let go. The dual-color LED gives you instant feedback without squinting. It glows a soft blue for backlighting so you can find it in the dark, then switches to bright red when the circuit is active. One look tells you whether power's flowing.\u003c\/p\u003e\n\u003cp\u003eThat backlighting matters more than it sounds. Run the helm at night and an unlit switch is a guessing game, but the 9057's soft blue glow puts every control right where your hand expects it, and the red active state means you never have to wonder if the horn or the washdown pump is still energized. It's a small touch that pays off every time you leave the dock after dark.\u003c\/p\u003e\n\u003cp\u003eElectrically, the 9057 is rated at 15A on 12-24V DC in a single-channel setup, or 7.5A per channel when you wire it as a dual-channel switch. The contact block gives you 1 normally-open and 1 normally-closed contact in single configuration, or 2 NO and 2 NC in dual. That flexibility lets one part number cover a lot of jobs, from a simple momentary trigger to a two-circuit control. Bluewater rates the mechanism for 50,000 mechanical cycles and 10,000 electrical cycles, so it's built to keep clicking long after the install is a memory.\u003c\/p\u003e\n\u003cp\u003eOne thing to be clear about: this listing is the switch body only. The actuator, the pressable cap, is fully detachable and customizable on the 9057 platform, which is a real plus for builders who want to match caps across a panel, but it does mean you'll want to confirm you have the actuator you need before wiring day. If you're building out a full console, order your caps alongside the bodies so nothing stalls the job.\u003c\/p\u003e\n\u003cp\u003eInstallation is genuinely simple. Drill a clean 19mm hole in material up to 6mm thick, drop the body through, and connect the three color-coded switch contacts, then the two LED leads. The color coding keeps the wiring honest so you're not chasing a multimeter around the helm. The LED does need its own switched 12V feed, and it's polarity-sensitive, so mind the positive and negative on the indicator leads. A little care there and the dual-color function works the first time.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Boat builders and riggers laying out a clean, uniform switch panel. Marine techs upgrading a tired old rocker to something sealed and modern. And DIY owners who care that the hardware behind the dash is the same grade the pros reach for. It's not the switch for a windlass motor or thruster pulling heavy sustained amps, so match the load to the 15A rating and you'll get years out of it.\u003c\/p\u003e\n\u003cp\u003eBacked by Bluewater's marine-grade build and NVN Marine's support, the 9057 19mm push button is the kind of small part that quietly makes a whole install look and feel right.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSS316 stainless steel body resists salt spray, washdowns, and corrosion for long marine service life\u003c\/li\u003e\n  \u003cli\u003eIP69K waterproof rating via Bluewater Deutsch-style connectors seals against high-pressure spray and hose-downs\u003c\/li\u003e\n  \u003cli\u003eMomentary Off-(On) action energizes only while pressed, ideal for horns, starters, trim, and windlass triggers\u003c\/li\u003e\n  \u003cli\u003eDual-color LED glows blue for backlighting and red when the circuit is active for instant status at a glance\u003c\/li\u003e\n  \u003cli\u003eRated 15A at 12-24V DC single-channel, or 7.5A per channel in dual-channel wiring\u003c\/li\u003e\n  \u003cli\u003eContact block offers 1 NO \/ 1 NC single-channel or 2 NO \/ 2 NC dual-channel for flexible circuits\u003c\/li\u003e\n  \u003cli\u003eFits a single 19mm mounting hole in panels up to 6mm thick for tight helm and console layouts\u003c\/li\u003e\n  \u003cli\u003eRated for 50,000 mechanical cycles and 10,000 electrical cycles\u003c\/li\u003e\n  \u003cli\u003eDetachable, customizable actuator lets builders match caps across a full switch panel\u003c\/li\u003e\n  \u003cli\u003eColor-coded switch and LED leads keep wiring fast and mistake-free\u003c\/li\u003e\n  \u003cli\u003eSwitch body only, actuator sourced separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Bluewater reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes this switch come with the actuator cap?\u003c\/summary\u003e\n    \u003cp\u003eNo. This listing is the switch body only. The 9057's actuator is detachable and customizable, so you'll source the cap that matches your panel separately. Confirm you have the right actuator before wiring day.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does momentary Off-(On) mean?\u003c\/summary\u003e\n    \u003cp\u003eThe switch is off at rest and only completes the circuit while you're holding it down. Let go and it returns to off. That's ideal for horns, starters, trim tabs, and windlass triggers that should fire on demand.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much current can it handle?\u003c\/summary\u003e\n    \u003cp\u003eIt's rated 15A at 12-24V DC as a single-channel switch, or 7.5A per channel when wired dual-channel. Match your load to that rating. It isn't meant for heavy sustained draws like a thruster or windlass motor.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it really waterproof?\u003c\/summary\u003e\n    \u003cp\u003eYes. Bluewater seals the 9057 to an IP69K rating using Deutsch-style connectors, so it withstands salt spray, washdowns, and the high-pressure hose-downs common on open boats.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size hole do I drill?\u003c\/summary\u003e\n    \u003cp\u003eA single 19mm hole. The body fits material up to 6mm thick, which covers most helm, console, and dash panels.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat do the LED colors mean?\u003c\/summary\u003e\n    \u003cp\u003eThe LED glows soft blue for backlighting so you can find the switch in the dark, and turns red when the circuit is active. The LED needs its own switched 12V feed and is polarity-sensitive, so mind the leads.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the switch contacts?\u003c\/summary\u003e\n    \u003cp\u003eYou get 1 normally-open and 1 normally-closed contact in single-channel configuration, or 2 NO and 2 NC when wired as a dual-channel switch.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long will it last?\u003c\/summary\u003e\n    \u003cp\u003eBluewater rates the mechanism for 50,000 mechanical cycles and 10,000 electrical cycles, and the SS316 stainless body is built to resist corrosion over years of marine use.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the body made of?\u003c\/summary\u003e\n    \u003cp\u003eThe housing is SS316 stainless steel and the actuator hardware is nickel-plated brass and stainless, all chosen to hold up in salt-air environments.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eBluewater 19mm Inrush Push Button Switch Momentary Off-(On) - Blue\/Red LED - Switch Body Only\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBluewater\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e9057-2113\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e810196330771\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003e9057 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Hole Diameter\u003c\/th\u003e\n\u003ctd\u003e19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSwitch Type\u003c\/th\u003e\n\u003ctd\u003eMomentary Off-(On)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSwitch Rating\u003c\/th\u003e\n\u003ctd\u003e15A \/ 12-24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDual-Channel Rating\u003c\/th\u003e\n\u003ctd\u003e7.5A per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSwitch Contacts\u003c\/th\u003e\n\u003ctd\u003e1 NO, 1 NC (single) \/ 2 NO, 2 NC (dual)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMechanical Life\u003c\/th\u003e\n\u003ctd\u003e50,000 Cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eElectrical Life\u003c\/th\u003e\n\u003ctd\u003e10,000 Cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Material\u003c\/th\u003e\n\u003ctd\u003eSS316 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator Material\u003c\/th\u003e\n\u003ctd\u003eNickel-Plated Brass \/ Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWaterproof Rating\u003c\/th\u003e\n\u003ctd\u003eIP69K\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Color\u003c\/th\u003e\n\u003ctd\u003eBlue (backlight) \/ Red (active)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnector Type\u003c\/th\u003e\n\u003ctd\u003eDeutsch-Style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMax Panel Thickness\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSwitch Body Only\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does this switch come with the actuator cap?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This listing is the switch body only. The 9057's actuator is detachable and customizable, so you'll source the cap that matches your panel separately. Confirm you have the right actuator before wiring day.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does momentary Off-(On) mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The switch is off at rest and only completes the circuit while you're holding it down. Let go and it returns to off. That's ideal for horns, starters, trim tabs, and windlass triggers that should fire on demand.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much current can it handle?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's rated 15A at 12-24V DC as a single-channel switch, or 7.5A per channel when wired dual-channel. Match your load to that rating. It isn't meant for heavy sustained draws like a thruster or windlass motor.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it really waterproof?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Bluewater seals the 9057 to an IP69K rating using Deutsch-style connectors, so it withstands salt spray, washdowns, and the high-pressure hose-downs common on open boats.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size hole do I drill?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A single 19mm hole. The body fits material up to 6mm thick, which covers most helm, console, and dash panels.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What do the LED colors mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The LED glows soft blue for backlighting so you can find the switch in the dark, and turns red when the circuit is active. The LED needs its own switched 12V feed and is polarity-sensitive, so mind the leads.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the switch contacts?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You get 1 normally-open and 1 normally-closed contact in single-channel configuration, or 2 NO and 2 NC when wired as a dual-channel switch.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long will it last?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Bluewater rates the mechanism for 50,000 mechanical cycles and 10,000 electrical cycles, and the SS316 stainless body is built to resist corrosion over years of marine use.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the body made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The housing is SS316 stainless steel and the actuator hardware is nickel-plated brass and stainless, all chosen to hold up in salt-air environments.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Bluewater","offers":[{"title":"Default Title","offer_id":44859134115933,"sku":"101921","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/101921XL.jpg?v=1785871905","url":"https:\/\/nvnmarine.com\/products\/bluewater-9057-19mm-momentary-push-button-switch","provider":"NVN Marine","version":"1.0","type":"link"}