{"product_id":"bluewater-50a-mid-range-panel-mount-breaker","title":"Bluewater Mid-Range 50A Panel Mount Circuit Breaker","description":"\u003cp class=\"nvn-hero\"\u003eThe Bluewater Mid-Range 50A Panel Mount Circuit Breaker protects moderate-load DC circuits from overloads and short circuits. It's rated for 12 to 32V DC with up to 2500A interrupting capacity, and it's built for boat and RV electrical panels.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eA breaker is the one part of your boat's wiring you hope never gets tested. When something goes wrong, a chafed wire, a shorted pump, a corroded connection, this is the part that decides whether you lose a circuit or lose a lot more. The Bluewater Mid-Range 50A Panel Mount Circuit Breaker is built for that job on moderate-load DC circuits, and it's the kind of part you install once and don't think about again.\u003c\/p\u003e\n\u003cp\u003eIt carries a 50 amp rating and protects against both overload and short circuits. It's compatible with 12 to 32V DC systems, so it works on a 12V center console, a 24V cruiser, or the house side of an RV or mobile rig. Bluewater positions the Mid-Range line for auxiliary and accessory circuits, and that's where a 50A breaker earns its keep. Think bilge and livewell pump banks, a windlass feed on a smaller boat, a bus bar feed for a block of accessories, or an inverter or charger branch sized to match.\u003c\/p\u003e\n\u003cp\u003eThe interrupting capacity is up to 2500A. That number matters more than most people realize. If a dead short happens close to a big battery bank, the breaker has to open that fault safely, not weld itself shut. A rating of 2500A gives you a solid margin on the kind of 12V and 24V systems this breaker is meant for. It's still worth checking your own battery bank's available short-circuit current if you run a large lithium setup, since those can push a lot of current.\u003c\/p\u003e\n\u003cp\u003eThe housing is thermoplastic, and the internal components are nickel-plated copper. Nickel plating helps the conductive parts stand up to the moisture, salt air, and vibration that wear down bare copper over a season or two. Bluewater rates it as marine grade, so it's designed for boats, and it's equally at home in RV and mobile electrical systems where bumps and road shake are the daily routine.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward. This is the panel mount version, so it sets into a panel cutout and connects with #10 ring terminals. If you'd rather mount it on a flat surface instead of a panel, Bluewater makes surface mount versions of the Mid-Range breaker too, and those are a separate item. Ring terminals aren't included with the breaker, so grab a crimp-on set sized for your wire and use a proper crimper. A good crimp with adhesive-lined heat shrink is worth the extra minute.\u003c\/p\u003e\n\u003cp\u003eSizing a breaker comes down to the wire, not the load. The breaker's job is to protect the conductor, so pick a wire gauge that safely carries at least 50 amps for the length of your run, and check it against a current ABYC ampacity table. If your actual load is much smaller than 50 amps, don't force a 50A breaker onto thin wire. Use a lower-rated breaker that matches the cable. We're happy to help you sort that out before you order.\u003c\/p\u003e\n\u003cp\u003ePlace the breaker as close to the power source as practical, on the positive side, with the wire between the battery and the breaker kept short and well supported. Keep the terminals clean and tight, and re-check them after the first few trips on the water, because connections that settle in are the ones that cause trouble later.\u003c\/p\u003e\n\u003cp\u003eThis breaker isn't meant for AC circuits, and it isn't a fit for very high current feeds like a big bow thruster or a main battery feed. Those need heavier protection rated for the load. For everyday DC accessory circuits at up to 50 amps, though, it's a clean, dependable way to protect your wiring and keep the circuit easy to isolate and service. Match it to your wire, crimp your terminals well, and it'll do its job quietly for years.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e50 amp rating gives overload and short-circuit protection for moderate-load DC circuits.\u003c\/li\u003e\n  \u003cli\u003e12 to 32V DC compatible, so it works on 12V and 24V boat systems and RV or mobile setups.\u003c\/li\u003e\n  \u003cli\u003eInterrupting capacity up to 2500A for dependable short-circuit protection.\u003c\/li\u003e\n  \u003cli\u003eThermoplastic housing with nickel-plated copper components built for vibration, moisture, and marine conditions.\u003c\/li\u003e\n  \u003cli\u003ePanel mount design sets cleanly into a panel cutout.\u003c\/li\u003e\n  \u003cli\u003eConnects with #10 ring terminals, which you'll want to crimp and seal properly.\u003c\/li\u003e\n  \u003cli\u003ePart of the Bluewater Mid-Range line, with surface mount versions sold separately.\u003c\/li\u003e\n  \u003cli\u003eSuited to auxiliary and accessory circuits like pump banks, bus feeds, and charger branches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Bluewater reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat amp rating is this breaker?\u003c\/summary\u003e\n    \u003cp\u003eIt's a 50 amp breaker, listed as 50A in the Bluewater Mid-Range line (model 78000-9600-50).\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat voltage can I use it on?\u003c\/summary\u003e\n    \u003cp\u003eIt's rated for a maximum of 32V DC and is compatible with 12 to 32V DC systems. That covers 12V and 24V boat systems as well as RV and mobile electrical setups.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it on an AC circuit?\u003c\/summary\u003e\n    \u003cp\u003eNo. The ratings published for this breaker are DC only, so don't use it for AC circuits.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the interrupting capacity?\u003c\/summary\u003e\n    \u003cp\u003eUp to 2500A, which is the level of short-circuit current the breaker is designed to interrupt.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat terminals does it use?\u003c\/summary\u003e\n    \u003cp\u003eIt connects with #10 ring terminals. They're not part of the breaker listing, so plan to buy ring terminals sized for your wire.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a panel mount or surface mount breaker?\u003c\/summary\u003e\n    \u003cp\u003eThis one is the panel mount version. Bluewater also makes surface mount versions of the Mid-Range breaker, and those are separate products.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is it made of?\u003c\/summary\u003e\n    \u003cp\u003eThe housing is thermoplastic, and the internal components are nickel-plated copper.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat kinds of circuits is a 50A Mid-Range breaker meant for?\u003c\/summary\u003e\n    \u003cp\u003eBluewater designed the Mid-Range line for moderate-load DC systems such as auxiliary and accessory circuits. Always size the breaker to protect the wire in that circuit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it marine grade?\u003c\/summary\u003e\n    \u003cp\u003eYes. Bluewater describes it as marine grade and built to withstand vibration, moisture, and harsh marine environments.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I choose the right breaker size?\u003c\/summary\u003e\n    \u003cp\u003eSize it to protect the wire. Choose a wire gauge that safely carries at least 50 amps for your run length, check an ABYC ampacity table, and if your wire is smaller, step down to a lower-rated breaker.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eBluewater Mid-Range 50A Panel Mount Circuit Breaker\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBluewater\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e78000-9600-50\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e810196332386\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Line\u003c\/th\u003e\n\u003ctd\u003eMid-Range\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCurrent Rating\u003c\/th\u003e\n\u003ctd\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMax Voltage\u003c\/th\u003e\n\u003ctd\u003e32V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage Compatibility\u003c\/th\u003e\n\u003ctd\u003e12 to 32V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInterrupting Capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 2500A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003ePanel mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Material\u003c\/th\u003e\n\u003ctd\u003eThermoplastic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eComponent Material\u003c\/th\u003e\n\u003ctd\u003eNickel-plated copper\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTerminals\u003c\/th\u003e\n\u003ctd\u003e#10 ring terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProtection Type\u003c\/th\u003e\n\u003ctd\u003eOverload and short-circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What amp rating is this breaker?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a 50 amp breaker, listed as 50A in the Bluewater Mid-Range line (model 78000-9600-50).\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What voltage can I use it on?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's rated for a maximum of 32V DC and is compatible with 12 to 32V DC systems. That covers 12V and 24V boat systems as well as RV and mobile electrical setups.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it on an AC circuit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The ratings published for this breaker are DC only, so don't use it for AC circuits.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the interrupting capacity?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Up to 2500A, which is the level of short-circuit current the breaker is designed to interrupt.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What terminals does it use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It connects with #10 ring terminals. They're not part of the breaker listing, so plan to buy ring terminals sized for your wire.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a panel mount or surface mount breaker?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This one is the panel mount version. Bluewater also makes surface mount versions of the Mid-Range breaker, and those are separate products.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is it made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The housing is thermoplastic, and the internal components are nickel-plated copper.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What kinds of circuits is a 50A Mid-Range breaker meant for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Bluewater designed the Mid-Range line for moderate-load DC systems such as auxiliary and accessory circuits. Always size the breaker to protect the wire in that circuit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it marine grade?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Bluewater describes it as marine grade and built to withstand vibration, moisture, and harsh marine environments.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I choose the right breaker size?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Size it to protect the wire. Choose a wire gauge that safely carries at least 50 amps for your run length, check an ABYC ampacity table, and if your wire is smaller, step down to a lower-rated breaker.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Bluewater","offers":[{"title":"Default Title","offer_id":68055894098013,"sku":"1004892","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/BWE78000960050_001.jpg?v=1795011946","url":"https:\/\/nvnmarine.com\/products\/bluewater-50a-mid-range-panel-mount-breaker","provider":"NVN Marine","version":"1.0","type":"link"}