{"product_id":"bluewater-19mm-ring-style-button-stainless-steel","title":"Bluewater 19mm Ring Style Button - Stainless Steel","description":"\u003cp class=\"nvn-hero\"\u003eThe Bluewater 19mm Ring Style Button is the stainless steel replacement cap for Bluewater's 19mm LED-lit electronic push button switches. It's the face your thumb hits every time, so when salt and sun dull the old one, this button brings a working switch back to a clean, matched helm look without any rewiring.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Bluewater 19mm Ring Style Button in stainless steel is the replacement cap for Bluewater's 19mm LED-lit electronic push button switches. It's the part you press. Over time, that's the piece that takes the abuse. Salt spray, UV, thumbs, sunscreen, the occasional dock line dragged across the panel. The switch behind it can still work perfectly while the button face itself gets pitted, dull, or cracked. This button lets you bring that switch back to looking sharp without pulling the whole assembly and rewiring anything.\u003c\/p\u003e\n\u003cp\u003eLet's be clear about what this is, because it matters for what you order. This is the button cap only, not the switch body and not the electronics. If you've already got a Bluewater 19mm push button switch mounted at the helm and the button is worn, or you just want a cleaner stainless look, this is your part. If you need the actual switch with the LED and the contacts, that's a different item in the Bluewater 19mm line. So check what you're replacing before you buy. Nine times out of ten, folks reach for this button because the switch works fine and only the face needs help.\u003c\/p\u003e\n\u003cp\u003eWhy stainless? Because a boat is a rough place for hardware. Salt air finds everything. A plated or plastic button on an open center console goes cloudy in a season or two. Stainless holds up. It resists corrosion, keeps its finish under constant spray, and it wipes clean when the salt builds up. On a helm where every other piece of trim is stainless, a matching stainless button keeps the panel looking intentional instead of patched together.\u003c\/p\u003e\n\u003cp\u003eThe ring style face is the other reason people pick this one. It's got that recessed ring around the button that reads clean and modern on a switch panel. If you've built out a bank of Bluewater 19mm switches for your nav lights, bilge, washdown, livewell, and horn, running the same ring style stainless button across all of them gives you that uniform, factory-rigged look. Mixed button styles on a panel always look like an afterthought. Matched ones look like you planned it.\u003c\/p\u003e\n\u003cp\u003eInstallation is about as simple as marine parts get. The button is sized for the 19mm Bluewater switch, so it seats onto the existing switch without any rewiring, soldering, or panel modification. You're swapping the face, not touching the circuit. If your switches are already in a proper 19mm panel cutout, this drops right into the system you've already got. One tip from folks who've done a bunch of these: work clean and dry, and make sure the old button is fully clear before seating the new one so it sits flush and even with the rest of the bank.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anyone running Bluewater's 19mm push button switch system who wants to refresh a tired button or standardize the look of a helm. Center console owners cleaning up a salt-worn dash. Restorers bringing an older rig's switch panel back to life. Riggers building a new console who want every switch face to match. It's a small part, but it's the part your hand touches every time you flip on a light or kick the washdown, so it's worth having it look and feel right.\u003c\/p\u003e\n\u003cp\u003eBottom line: it's a stainless steel replacement button for the Bluewater 19mm LED-lit push button switches, ring style, sized at 19mm, sold individually. Order one to fix a single worn switch, or grab a handful to bring a whole panel up to a matched stainless finish. Either way, you're keeping a working switch in service and skipping the cost and hassle of replacing the entire unit.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eStainless steel construction resists corrosion and holds its finish under salt spray and constant sun\u003c\/li\u003e\n  \u003cli\u003eRing style face reads clean and modern on a switch panel for a finished helm look\u003c\/li\u003e\n  \u003cli\u003eSized at 19mm to fit Bluewater's 19mm LED-lit electronic push button switches\u003c\/li\u003e\n  \u003cli\u003eDirect replacement button, seats onto the existing switch with no rewiring, soldering, or panel work\u003c\/li\u003e\n  \u003cli\u003eMatches the rest of the Bluewater 19mm switch line for a uniform, factory-rigged panel\u003c\/li\u003e\n  \u003cli\u003eRestores a worn or tarnished button without the cost of replacing the whole switch\u003c\/li\u003e\n  \u003cli\u003eSold individually, so buy one for a single fix or a handful to standardize a full switch bank\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Bluewater reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the Bluewater 19mm Ring Style Button?\u003c\/summary\u003e\n    \u003cp\u003eIt's the stainless steel replacement button cap for Bluewater's 19mm LED-lit electronic push button switches. It's the face you press, and this part lets you refresh it without replacing the whole switch.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes this include the switch and the electronics?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is the button cap only, not the switch body or the LED and contacts. If your Bluewater 19mm switch works but the button is worn, this is the right part. If you need the full switch, that's a separate item in the Bluewater 19mm line.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich switches does it fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's built for Bluewater's 19mm LED-lit electronic push button switches. If your switch panel is running the Bluewater 19mm system, this button is sized to match it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size is it?\u003c\/summary\u003e\n    \u003cp\u003eIt's a 19mm button, matching the 19mm Bluewater switch form factor and standard 19mm panel cutouts.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy stainless steel?\u003c\/summary\u003e\n    \u003cp\u003eBecause a boat is hard on hardware. Stainless resists corrosion, shrugs off salt spray, and keeps its finish where plated or plastic buttons go cloudy in a season or two. It also wipes clean when salt builds up.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it hard to install?\u003c\/summary\u003e\n    \u003cp\u003eNot at all. The button seats onto your existing switch with no rewiring, soldering, or panel modification. You're swapping the face, not touching the circuit. Make sure the old button is fully clear so the new one sits flush.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhen should I replace the button?\u003c\/summary\u003e\n    \u003cp\u003eWhen the face is pitted, dull, cracked, or tarnished from sun and salt, or when you want to standardize the look across a bank of switches. The switch behind it often still works fine, so you only need the cap.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it match my other Bluewater switches?\u003c\/summary\u003e\n    \u003cp\u003eYes. Running the same ring style stainless button across a bank of Bluewater 19mm switches gives you a uniform, factory-rigged look instead of a mix of mismatched faces.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eBluewater 19mm Ring Style Button - Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBluewater\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e9551-1002\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e810196334304\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eReplacement Button\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eStyle\u003c\/th\u003e\n\u003ctd\u003eRing Style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eBluewater 19mm LED Lit Electronic Push Button Switches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eElectrical, Switches \u0026amp; Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackage Quantity\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eMarine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the Bluewater 19mm Ring Style Button?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the stainless steel replacement button cap for Bluewater's 19mm LED-lit electronic push button switches. It's the face you press, and this part lets you refresh it without replacing the whole switch.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does this include the switch and the electronics?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This is the button cap only, not the switch body or the LED and contacts. If your Bluewater 19mm switch works but the button is worn, this is the right part. If you need the full switch, that's a separate item in the Bluewater 19mm line.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which switches does it fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built for Bluewater's 19mm LED-lit electronic push button switches. If your switch panel is running the Bluewater 19mm system, this button is sized to match it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a 19mm button, matching the 19mm Bluewater switch form factor and standard 19mm panel cutouts.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why stainless steel?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Because a boat is hard on hardware. Stainless resists corrosion, shrugs off salt spray, and keeps its finish where plated or plastic buttons go cloudy in a season or two. It also wipes clean when salt builds up.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it hard to install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Not at all. The button seats onto your existing switch with no rewiring, soldering, or panel modification. You're swapping the face, not touching the circuit. Make sure the old button is fully clear so the new one sits flush.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"When should I replace the button?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"When the face is pitted, dull, cracked, or tarnished from sun and salt, or when you want to standardize the look across a bank of switches. The switch behind it often still works fine, so you only need the cap.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it match my other Bluewater switches?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Running the same ring style stainless button across a bank of Bluewater 19mm switches gives you a uniform, factory-rigged look instead of a mix of mismatched faces.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Bluewater","offers":[{"title":"Default Title","offer_id":44859135590493,"sku":"102367","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/102367XL.jpg?v=1785871954","url":"https:\/\/nvnmarine.com\/products\/bluewater-19mm-ring-style-button-stainless-steel","provider":"NVN Marine","version":"1.0","type":"link"}