{"product_id":"blue-sea-7550-bss-90a-flat-rocker-circuit-breaker","title":"Blue Sea C-Series 7550-BSS Flat Rocker Breaker 90A","description":"\u003cp class=\"nvn-hero\"\u003eThe Blue Sea Systems C-Series 7550-BSS is a single pole 90A flat rocker circuit breaker that protects and switches in one device. It's trip free and ignition protected, built for inverters, bow thrusters, and windlasses.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Blue Sea Systems C-Series Flat Rocker Circuit Breaker, model 7550-BSS, is a single pole 90A breaker that also works as your on\/off switch. You get overcurrent protection and a manual switch in one device, so that's one less part to buy, mount, and wire in. Blue Sea aims this one at the big loads on a boat, including inverters, bow thrusters, and windlasses. If you've got a heavy circuit that needs a dependable breaker at the panel, this is the kind of gear that gets the job done.\u003c\/p\u003e\n\u003cp\u003eLet's talk about the rocker. The actuator sits flush with the panel when the breaker is ON. That's a small detail that matters out there. A bump from a knee, a duffel bag, or a crew member reaching past the panel in a seaway won't flip it by accident. Blue Sea says the flush design eliminates the risk of accidental switching, and it's easy to see why. The actuator also shows a color when the breaker is OFF, so one glance at the panel tells you what's live and what isn't.\u003c\/p\u003e\n\u003cp\u003eThis is a trip free breaker. That means it can't be held closed after it trips. If there's a fault on the circuit, nobody can lean on the rocker and force it back on. The breaker does its job and stays open until the problem is sorted. Internally it's a magnetic hydraulic design, which is the type Blue Sea lists for the whole C-Series. On a circuit this size, that kind of protection is exactly what you want between the battery bank and the load.\u003c\/p\u003e\n\u003cp\u003eNow the numbers. The 7550-BSS is rated 90A AC and 90A DC. Maximum voltage is 240V AC and 48V DC, so it covers the usual 12V and 24V DC boat systems with plenty of headroom. Interrupt capacity is 3000A at 120V AC and 5000A at 32V DC. It's rated for operation from -40 degrees C up to 85 degrees C, which takes in cold boatyards in January and hot engine spaces in July. And it's built for 10,000 switching cycles, so it'll keep up with regular use.\u003c\/p\u003e\n\u003cp\u003eSafety matters when there's gas aboard. This breaker is ignition protected, which Blue Sea describes as safe for installation aboard gasoline powered boats. That gives you flexibility on where it can go, whether that's near the house bank, at a main distribution panel, or close to the heavy load it protects. You'll still want to follow good practice for any installation near fuel, but you won't have to hunt for a different breaker just because your boat runs gas.\u003c\/p\u003e\n\u003cp\u003eThe hardware is straightforward. Terminals are 1\/4-20 tin-plated brass studs, and Blue Sea calls for 35 in-lb (3.95 Nm) of torque on them. Tin-plated brass is a sensible choice for terminals that live in damp, salty air. The breaker mounts with 6-32 stainless steel screws, torqued to 6 in-lb (0.68 Nm). Don't skip those torque numbers. A loose lug on a 90A circuit makes heat, and an overtightened mounting screw can crack the panel or the housing. A small torque wrench pays for itself fast on a job like this.\u003c\/p\u003e\n\u003cp\u003eA few install notes from the dock. Size your cable and lugs for the full 90A load, because the breaker protects the wire as much as the equipment. Keep the connections clean and snug, and add a little protection against corrosion if the spot is exposed. Remember this is a single pole breaker, so it opens one conductor. If your system calls for a different amperage, the C-Series comes in other ratings, so match the breaker to the circuit rather than guessing.\u003c\/p\u003e\n\u003cp\u003eAt 0.36 lb (0.16 kg), it's light and compact for what it does. It won't crowd a busy panel, and a flat rocker keeps the front of the helm clean and tidy. Whether you're wiring in a new windlass, adding an inverter for the galley, or replacing a tired breaker on an older boat, the 7550-BSS gives you a single, solid piece that protects and switches the circuit. And that's really all you need it to do.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e90A AC \/ 90A DC rating handles big loads like inverters, bow thrusters, and windlasses\u003c\/li\u003e\n  \u003cli\u003eFlat rocker actuator sits flush when ON, so it can't be bumped on by accident\u003c\/li\u003e\n  \u003cli\u003eColored actuator shows when the breaker is OFF, so panel status is clear at a glance\u003c\/li\u003e\n  \u003cli\u003eTrip free design can't be held closed after it trips, so a fault can't be overridden\u003c\/li\u003e\n  \u003cli\u003eIgnition protected, safe for installation aboard gasoline powered boats\u003c\/li\u003e\n  \u003cli\u003eRated up to 240V AC and 48V DC, covering common 12V and 24V DC systems\u003c\/li\u003e\n  \u003cli\u003eInterrupt capacity of 3000A at 120V AC and 5000A at 32V DC\u003c\/li\u003e\n  \u003cli\u003e1\/4-20 tin-plated brass terminal studs, torque to 35 in-lb (3.95 Nm)\u003c\/li\u003e\n  \u003cli\u003eOperates from -40 deg C to 85 deg C for cold starts and hot engine spaces\u003c\/li\u003e\n  \u003cli\u003eRated for 10,000 switching cycles, with 6-32 stainless steel mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Blue Sea Systems reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the Blue Sea 7550-BSS used for?\u003c\/summary\u003e\n    \u003cp\u003eIt's a single pole, 90A circuit breaker that also acts as an on\/off switch. Blue Sea says it provides overcurrent protection for inverters, bow thrusters, and windlasses.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the amp and voltage ratings?\u003c\/summary\u003e\n    \u003cp\u003eIt's rated 90A AC and 90A DC. Maximum voltage is 240V AC and 48V DC, so it works with common 12V and 24V DC boat systems.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan it be used on a gasoline powered boat?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's ignition protected, and Blue Sea lists it as safe for installation aboard gasoline powered boats.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does trip free mean?\u003c\/summary\u003e\n    \u003cp\u003eIt means the breaker can't be held closed after it trips. If there's a fault, the rocker can't be forced on until the problem is cleared.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I tell if the breaker is off?\u003c\/summary\u003e\n    \u003cp\u003eThe rocker is flush in the ON position, and a colored actuator shows when it's OFF. You can read the panel at a glance.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat type of circuit breaker is it?\u003c\/summary\u003e\n    \u003cp\u003eIt's a magnetic hydraulic, trip free breaker with a flat rocker actuator and one pole.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size are the terminal studs and what torque do they need?\u003c\/summary\u003e\n    \u003cp\u003eThe terminals are 1\/4-20 tin-plated brass studs. Blue Sea specifies 35 in-lb (3.95 Nm) of torque.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I mount it and what torque should I use?\u003c\/summary\u003e\n    \u003cp\u003eIt mounts with 6-32 stainless steel screws. Torque them to 6 in-lb (0.68 Nm), so you don't overtighten and damage the panel or housing.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the interrupt capacity ratings?\u003c\/summary\u003e\n    \u003cp\u003eInterrupt capacity is 3000A at 120V AC and 5000A at 32V DC.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat temperature range is it rated for?\u003c\/summary\u003e\n    \u003cp\u003eIt's rated from -40 deg C to 85 deg C.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many switching cycles is it rated for?\u003c\/summary\u003e\n    \u003cp\u003eIt's rated for 10,000 switching cycles.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a single pole or double pole breaker?\u003c\/summary\u003e\n    \u003cp\u003eThis model is single pole, so it opens one conductor.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eBlue Sea C-Series Flat Rocker Circuit Breaker Single Pole 90A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlue Sea Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e7550-BSS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e632085075507\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e90A AC \/ 90A DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator Style\u003c\/th\u003e\n\u003ctd\u003eFlat Rocker\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePoles\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum Voltage\u003c\/th\u003e\n\u003ctd\u003e240V AC \/ 48V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCircuit Breaker Type\u003c\/th\u003e\n\u003ctd\u003eMagnetic Hydraulic - trip free\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTerminal Stud\u003c\/th\u003e\n\u003ctd\u003e1\/4-20 Tin-Plated Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTerminal Stud Torque\u003c\/th\u003e\n\u003ctd\u003e35 in-lb (3.95 Nm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInterrupt Capacity\u003c\/th\u003e\n\u003ctd\u003e3000A @ 120V AC, 5000A @ 32V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMinimum Operating Temperature\u003c\/th\u003e\n\u003ctd\u003e-40 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum Operating Temperature\u003c\/th\u003e\n\u003ctd\u003e85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Screw\u003c\/th\u003e\n\u003ctd\u003e6-32 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Screw Torque\u003c\/th\u003e\n\u003ctd\u003e6 in-lb (0.68 Nm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSwitching Cycles\u003c\/th\u003e\n\u003ctd\u003e10000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.36 lb (0.16 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the Blue Sea 7550-BSS used for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a single pole, 90A circuit breaker that also acts as an on\/off switch. Blue Sea says it provides overcurrent protection for inverters, bow thrusters, and windlasses.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the amp and voltage ratings?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's rated 90A AC and 90A DC. Maximum voltage is 240V AC and 48V DC, so it works with common 12V and 24V DC boat systems.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can it be used on a gasoline powered boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's ignition protected, and Blue Sea lists it as safe for installation aboard gasoline powered boats.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does trip free mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It means the breaker can't be held closed after it trips. If there's a fault, the rocker can't be forced on until the problem is cleared.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I tell if the breaker is off?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The rocker is flush in the ON position, and a colored actuator shows when it's OFF. You can read the panel at a glance.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What type of circuit breaker is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a magnetic hydraulic, trip free breaker with a flat rocker actuator and one pole.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size are the terminal studs and what torque do they need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The terminals are 1\/4-20 tin-plated brass studs. Blue Sea specifies 35 in-lb (3.95 Nm) of torque.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I mount it and what torque should I use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It mounts with 6-32 stainless steel screws. Torque them to 6 in-lb (0.68 Nm), so you don't overtighten and damage the panel or housing.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the interrupt capacity ratings?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Interrupt capacity is 3000A at 120V AC and 5000A at 32V DC.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What temperature range is it rated for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's rated from -40 deg C to 85 deg C.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many switching cycles is it rated for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's rated for 10,000 switching cycles.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a single pole or double pole breaker?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This model is single pole, so it opens one conductor.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":68066958508125,"sku":"1004913","price":44.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/BSS7550_001.jpg?v=1795097067","url":"https:\/\/nvnmarine.com\/products\/blue-sea-7550-bss-90a-flat-rocker-circuit-breaker","provider":"NVN Marine","version":"1.0","type":"link"}