{"product_id":"attwood-sp-15900-jon-boat-seat-mount-tilt-n-slide","title":"Attwood SP-15900 Jon Boat Seat Mount | Tilt-N-Slide","description":"\u003cp class=\"nvn-hero\"\u003eThe Attwood SP-15900 is a bench-style seat mount set built for jon boats. You get the aluminum seat plate and a pair of 15-inch slide rails, so you can drop a standard boat seat onto your bench and slide it fore and aft to find your spot. Light, rust-resistant, and simple to bolt down. Just add the seat.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eAttwood's been building marine hardware for over a hundred years, and the SP-15900 is one of those parts that just does its job without any fuss. It's a bench-style seat mount set made for jon boats, and it ships with the aluminum seat plate plus a pair of 15-inch slide rails. Bolt the rails down, drop the plate on, and you've got a real mounting point for a standard boat seat where before you had nothing but a bare aluminum bench.\u003c\/p\u003e\n\u003cp\u003eThe reason folks reach for this one is the Tilt-N-Slide setup. The seat plate rides on the rails, so you can slide the seat forward and back to find the position that works. Casting up front? Slide forward. Running the tiller all day? Slide back and give your legs some room. And when you want the deck clear for loading gear or standing to fight a fish, the tilt lets you fold the seat down out of the way.\u003c\/p\u003e\n\u003cp\u003eAbout those 15-inch rails. That length gives you a solid range of slide travel while keeping the footprint tight, which is exactly what you want on a narrow jon bench. If your layout calls for more fore-and-aft range, Attwood offers the same style mount on longer 30-inch rails. But for most bench jons, 15 inches hits the sweet spot between adjustability and not eating up your whole seat base.\u003c\/p\u003e\n\u003cp\u003eThe plate and rails are aluminum, so the set stays light and won't rust out on you the way plated steel does. That matters on a boat that lives wet. It keeps the weight down too, which you'll appreciate on a car-topper or any jon you're loading and unloading by hand.\u003c\/p\u003e\n\u003cp\u003eBefore you order, throw a tape measure across your bench. You want enough flat, solid width to land both rails and get bolts through into something that'll actually hold. Most factory jon benches handle it fine. If your bench is ribbed or hollow underneath, plan on a backing plate so you've got real material to torque against.\u003c\/p\u003e\n\u003cp\u003eInstalling it is straightforward if you've turned a wrench before. The rails bolt down to your bench or floor. We'd run marine-grade stainless hardware sized to your bench, and on a thin aluminum floor it's worth adding fender washers or a backing plate underneath so the bolts don't pull through when you sit down hard or stand up quick. Take your time marking the holes so the rails sit square and the plate slides clean.\u003c\/p\u003e\n\u003cp\u003eNow, this is the mount, not the seat. It's built to take a standard bench-mount boat seat with the common bolt pattern, so you supply the seat you like and this gives it a home. Low-back, high-back, folding, that's up to you and your back. The SP-15900 just handles the mounting and the sliding.\u003c\/p\u003e\n\u003cp\u003ePlenty of anglers run a pair of these to turn a bare utility jon into a proper two-seat fishing rig. One forward for working the bank, one aft at the helm. Because the plate slides, you can trim each spot to whoever's sitting in it, which beats a fixed pedestal that never quite lands where you want it.\u003c\/p\u003e\n\u003cp\u003eMaintenance is about as easy as it gets. Aluminum shrugs off freshwater, and a quick rinse after a saltwater day keeps the slide action smooth. If the rails ever feel gritty, wipe them down and they're back to sliding clean. No motor, no electronics, nothing to fail. Just a mechanical mount that keeps working season after season.\u003c\/p\u003e\n\u003cp\u003eSo who's this for? Anybody with a jon boat who's tired of perching on a cooler or a bare bench. Whether you're duck hunting, running trotlines, or chasing bass on a farm pond, a real seat that slides and tilts makes a long day a whole lot more comfortable. It's a simple, honest piece of gear, and at this price it's an easy upgrade to a boat you actually use.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eAluminum seat plate and 15-inch slide rails, light enough for car-toppers and rust-resistant for a boat that lives wet\u003c\/li\u003e\n  \u003cli\u003eTilt-N-Slide design lets the seat slide fore and aft to dial in your casting or running position\u003c\/li\u003e\n  \u003cli\u003eTilt function folds the seat down to clear the deck when you need open floor\u003c\/li\u003e\n  \u003cli\u003eBench-style mount sized for standard jon boat benches\u003c\/li\u003e\n  \u003cli\u003eAccepts standard bench-mount boat seats with the common bolt pattern (seat sold separately)\u003c\/li\u003e\n  \u003cli\u003e15-inch rail length balances slide travel with a tight footprint on narrow benches\u003c\/li\u003e\n  \u003cli\u003eBolt-down install to bench or floor, straightforward with basic hand tools\u003c\/li\u003e\n  \u003cli\u003eBacked by Attwood, a marine hardware maker with over a century in the business\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Attwood Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the Attwood SP-15900 come with a seat?\u003c\/summary\u003e\n    \u003cp\u003eNo, this is the seat plate and rail set only. It gives a standard bench-style boat seat a place to mount. You supply the seat you want.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat boats is it made for?\u003c\/summary\u003e\n    \u003cp\u003eJon boats. It's a bench-style mount that bolts down to a factory jon boat bench or floor.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long are the rails?\u003c\/summary\u003e\n    \u003cp\u003e15 inches. That gives a good range of fore-and-aft slide while keeping a tight footprint on a narrow bench. Attwood also offers the same style mount on 30-inch rails if you want more travel.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does Tilt-N-Slide actually do?\u003c\/summary\u003e\n    \u003cp\u003eThe seat plate slides along the rails so you can move the seat forward or back, and it tilts so you can fold the seat down to open up the deck when you need the floor space.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it aluminum, and will it rust?\u003c\/summary\u003e\n    \u003cp\u003eYes, the plate and rails are aluminum. Aluminum won't rust like plated steel, which is why it holds up on a boat. A freshwater rinse after saltwater days keeps everything sliding smooth.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with mounting hardware?\u003c\/summary\u003e\n    \u003cp\u003eThis is aftermarket packaging with the seat plate and rails. Plan on marine-grade stainless bolts sized to your bench, and grab fender washers or a backing plate for thin aluminum floors so nothing pulls through.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat seats will fit it?\u003c\/summary\u003e\n    \u003cp\u003eStandard bench-mount boat seats with the common bolt pattern. Low-back, high-back, or folding, your choice. You supply the seat.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I adjust the seat after it's mounted?\u003c\/summary\u003e\n    \u003cp\u003eYes. That's the whole point of the slide. You can trim the seat position fore and aft anytime without unbolting anything.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I run two of them?\u003c\/summary\u003e\n    \u003cp\u003eAbsolutely. A lot of folks mount one up front for the casting deck and one aft by the tiller to turn a bare utility jon into a two-seat fishing rig.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eAttwood SP-15900 Tilt-N-Slide Jon Boat Bench Seat Mount Set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eAttwood\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eSP-15900\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e014599159001\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eTilt-N-Slide Seat Mount Set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeat Mount Style\u003c\/th\u003e\n\u003ctd\u003eBench Style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRail Length\u003c\/th\u003e\n\u003ctd\u003e15 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eJon Boats\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAdjustment\u003c\/th\u003e\n\u003ctd\u003eSlide and tilt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eSeat plate and 15-inch rails\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSold As\u003c\/th\u003e\n\u003ctd\u003eSeat mount and rails only (seat not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eAftermarket\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the Attwood SP-15900 come with a seat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, this is the seat plate and rail set only. It gives a standard bench-style boat seat a place to mount. You supply the seat you want.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What boats is it made for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Jon boats. It's a bench-style mount that bolts down to a factory jon boat bench or floor.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long are the rails?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"15 inches. That gives a good range of fore-and-aft slide while keeping a tight footprint on a narrow bench. Attwood also offers the same style mount on 30-inch rails if you want more travel.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does Tilt-N-Slide actually do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The seat plate slides along the rails so you can move the seat forward or back, and it tilts so you can fold the seat down to open up the deck when you need the floor space.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it aluminum, and will it rust?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, the plate and rails are aluminum. Aluminum won't rust like plated steel, which is why it holds up on a boat. A freshwater rinse after saltwater days keeps everything sliding smooth.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with mounting hardware?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This is aftermarket packaging with the seat plate and rails. Plan on marine-grade stainless bolts sized to your bench, and grab fender washers or a backing plate for thin aluminum floors so nothing pulls through.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What seats will fit it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Standard bench-mount boat seats with the common bolt pattern. Low-back, high-back, or folding, your choice. You supply the seat.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I adjust the seat after it's mounted?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. That's the whole point of the slide. You can trim the seat position fore and aft anytime without unbolting anything.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I run two of them?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Absolutely. A lot of folks mount one up front for the casting deck and one aft by the tiller to turn a bare utility jon into a two-seat fishing rig.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Attwood","offers":[{"title":"Default Title","offer_id":45070604337245,"sku":"2009088","price":52.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_b09532eb-7531-4ada-9b85-fd06f5345441.jpg?v=1789705715","url":"https:\/\/nvnmarine.com\/products\/attwood-sp-15900-jon-boat-seat-mount-tilt-n-slide","provider":"NVN Marine","version":"1.0","type":"link"}