{"product_id":"attwood-99129-stainless-swing-table-leg-13-inch","title":"Attwood 99129 Stainless Swing Table Leg, 13 Inch","description":"\u003cp class=\"nvn-hero\"\u003eThe Attwood 99129 is a stainless steel swing leg for your boat table, and it comes ready to mount with a button lock and bracket in the box. It stands a fixed 13 inches on a 1-inch tube, wears a white rubber tip to protect your deck, and folds out of the way when you're done so you get your cockpit space back.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Attwood 99129 is a stainless steel swing leg built to hold up a boat table without turning your cockpit into an obstacle course. It stands 13 inches at a fixed height, rides on a 1-inch diameter tube, and comes with everything you need to get it mounted: a stainless button lock and a mounting bracket. The foot wears a white rubber tip so it sits quiet and doesn't skate around when the boat rolls. If you've been running a folding table that never quite feels solid, this is the kind of upgrade that pays off every time you set out lunch.\u003c\/p\u003e\n\u003cp\u003eThe 13-inch height is the sweet spot for a lot of smaller boats. On a 20 to 24 foot center console, it puts a table at a comfortable seated height in the cockpit or up on the bow. It works well under a round teak or laminate top in that same size range. On bigger express cruisers with taller seating, you'll want to measure first, because a fixed 13-inch leg can sit low against a higher settee. Measure from your mounting surface to where you want the tabletop to land, and if that number is close to 13 inches, you're in business.\u003c\/p\u003e\n\u003cp\u003eOne more thing on fit. This leg pairs nicely with a 36-inch round top, which is a popular size for a cockpit table on this class of boat. Just check your clearance before you commit. A 1-inch tube plus a table overhang can crowd a narrow walkway, so make sure people can still get past when the table's set up. On an open cockpit it's a non-issue, but tighter layouts are worth a second look.\u003c\/p\u003e\n\u003cp\u003eHere's what makes a swing leg worth it. When you're done eating, the table doesn't have to come all the way off and go find a locker. The leg swings out of the way and the whole setup stows fast, so you get your deck space back for fishing, boarding, or just moving around. That's the whole point on a smaller boat where every square foot of cockpit counts. The stainless button lock holds the leg firmly in the up position and releases with a push when you're ready to knock it down.\u003c\/p\u003e\n\u003cp\u003eMounting is straightforward, but do it right the first time. The bracket lands best on a flat fiberglass surface. If your console or sole has a curve to it, plan on a shim or a backing block so the base sits flush and the leg doesn't bind as it swings. Don't just run screws into a thin plywood core. Through-bolt the bracket to a proper backing plate under the deck so it can't pull out under load. And before you drill your final holes, dry-fit the table and swing it through its full arc. Boats with side rails or a tight walkway can limit how far the leg travels, and you want to catch that before the bit goes through the gelcoat.\u003c\/p\u003e\n\u003cp\u003eStainless steel is the right material for a part that lives out in the weather. It shrugs off spray and sun far better than a plated or painted leg. That said, salt is relentless. Give the button lock a rinse and a shot of light marine grease every month or so, especially if you keep the boat in salt water, and it'll keep releasing clean instead of freezing up on you. The white rubber tip protects your deck and the table foot, but keep an eye on it over time and replace it if it starts to scuff or wear.\u003c\/p\u003e\n\u003cp\u003eFor the money, the Attwood 99129 is a simple, honest piece of hardware that does one job and does it well. It's stainless where it counts, it comes with the lock and bracket in the box, and it's sized for the boats most of us actually run. Set it up once, take care of the lock, and it'll be holding your table steady for a lot of seasons.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eStainless steel construction stands up to salt spray and sun far better than plated or painted table legs\u003c\/li\u003e\n  \u003cli\u003e13-inch fixed height suits cockpit and bow tables on 20 to 24 foot center consoles and similar small boats\u003c\/li\u003e\n  \u003cli\u003e1-inch diameter tube gives a solid, stable base for a round or rectangular tabletop\u003c\/li\u003e\n  \u003cli\u003eStainless button lock holds the leg firmly upright and releases with a simple push for fast stowage\u003c\/li\u003e\n  \u003cli\u003eWhite rubber tip protects your deck and keeps the foot from sliding when the boat rolls\u003c\/li\u003e\n  \u003cli\u003eMounting bracket included in the box, no extra hardware to source before you install\u003c\/li\u003e\n  \u003cli\u003eSwing design lets the table fold out of the way so you reclaim cockpit space for fishing and boarding\u003c\/li\u003e\n  \u003cli\u003eCompact 1-3\/8 inch by 2-1\/4 inch bracket footprint tucks into tight console and sole spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Attwood Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow tall is the Attwood 99129 swing leg?\u003c\/summary\u003e\n    \u003cp\u003eIt's a fixed 13 inches tall on a 1-inch diameter stainless tube. Measure from your mounting surface to where you want the tabletop to sit. If that's near 13 inches, you're set.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the leg made of?\u003c\/summary\u003e\n    \u003cp\u003eStainless steel, which handles spray and sun much better than plated or painted hardware. Give the button lock a rinse and a little marine grease now and then and it'll last for seasons.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat comes in the box?\u003c\/summary\u003e\n    \u003cp\u003eThe swing leg, a stainless button lock, a mounting bracket, and a white rubber tip already fitted on the foot. You've got what you need to mount it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size boats does the 13-inch height fit best?\u003c\/summary\u003e\n    \u003cp\u003eIt's a good match for 20 to 24 foot center consoles and similar small boats, at the cockpit or the bow. On taller express cruiser seating a fixed 13-inch leg can sit low, so measure first.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I mount it so it won't pull out?\u003c\/summary\u003e\n    \u003cp\u003eLand the bracket on a flat surface and through-bolt it to a backing plate under the deck. Don't just run screws into a thin plywood core, because it can pull loose under load.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eMy console has a curved surface. Will it still work?\u003c\/summary\u003e\n    \u003cp\u003eYou can mount it, but plan on a shim or a backing block so the base sits flush. A curved mount can make the leg bind as it swings, so getting the base flat matters.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill the rubber tip mark my deck?\u003c\/summary\u003e\n    \u003cp\u003eThe white tip is there to protect the deck and the table foot. Keep an eye on it over time and swap it out if it starts to scuff or wear.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I keep the button lock from sticking in salt air?\u003c\/summary\u003e\n    \u003cp\u003eRinse it and hit it with a shot of light marine grease about once a month, especially if you keep the boat in salt water. That keeps it releasing clean instead of freezing up.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the height adjustable?\u003c\/summary\u003e\n    \u003cp\u003eNo, this is a fixed-height leg at 13 inches. If you need a different tabletop height, measure your mounting surface first and pick the leg length that lands where you want it.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eAttwood 99129 Stainless Steel Swing Table Leg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eAttwood Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e99129\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e038203991290\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg Style\u003c\/th\u003e\n\u003ctd\u003eSwing Leg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight Adjustment\u003c\/th\u003e\n\u003ctd\u003eFixed Height\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e13 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTube Diameter\u003c\/th\u003e\n\u003ctd\u003e1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBracket Width\u003c\/th\u003e\n\u003ctd\u003e1-3\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBracket Depth\u003c\/th\u003e\n\u003ctd\u003e2-1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFoot Tip\u003c\/th\u003e\n\u003ctd\u003eWhite Rubber Tip\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLocking Mechanism\u003c\/th\u003e\n\u003ctd\u003eStainless Button Lock\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Hardware\u003c\/th\u003e\n\u003ctd\u003eMounting Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How tall is the Attwood 99129 swing leg?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a fixed 13 inches tall on a 1-inch diameter stainless tube. Measure from your mounting surface to where you want the tabletop to sit. If that's near 13 inches, you're set.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the leg made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Stainless steel, which handles spray and sun much better than plated or painted hardware. Give the button lock a rinse and a little marine grease now and then and it'll last for seasons.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What comes in the box?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The swing leg, a stainless button lock, a mounting bracket, and a white rubber tip already fitted on the foot. You've got what you need to mount it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size boats does the 13-inch height fit best?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a good match for 20 to 24 foot center consoles and similar small boats, at the cockpit or the bow. On taller express cruiser seating a fixed 13-inch leg can sit low, so measure first.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I mount it so it won't pull out?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Land the bracket on a flat surface and through-bolt it to a backing plate under the deck. Don't just run screws into a thin plywood core, because it can pull loose under load.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"My console has a curved surface. Will it still work?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You can mount it, but plan on a shim or a backing block so the base sits flush. A curved mount can make the leg bind as it swings, so getting the base flat matters.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will the rubber tip mark my deck?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The white tip is there to protect the deck and the table foot. Keep an eye on it over time and swap it out if it starts to scuff or wear.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I keep the button lock from sticking in salt air?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Rinse it and hit it with a shot of light marine grease about once a month, especially if you keep the boat in salt water. That keeps it releasing clean instead of freezing up.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the height adjustable?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, this is a fixed-height leg at 13 inches. If you need a different tabletop height, measure your mounting surface first and pick the leg length that lands where you want it.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":45072542171229,"sku":"2009288","price":45.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_fcf4595b-6577-4aa6-aeae-17d9b23f88aa.jpg?v=1789750648","url":"https:\/\/nvnmarine.com\/products\/attwood-99129-stainless-swing-table-leg-13-inch","provider":"NVN Marine","version":"1.0","type":"link"}