{"product_id":"ancor-118502-3-0-battery-cable-red-25-ft","title":"Ancor 118502 3\/0 Tinned Copper Battery Cable, Red, 25 ft","description":"\u003cp class=\"nvn-hero\"\u003eThe Ancor 118502 is a 25 foot spool of red 3\/0 gauge tinned copper battery cable, sold without terminals so you can cut and crimp each run to fit your boat. Tinned strands fight corrosion in salt air, and the red jacket keeps your positive side easy to spot. It's UL, CSA, ABYC and US Coast Guard certified.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThis is the Ancor 118502, a 25 foot spool of 3\/0 gauge tinned copper battery cable with red PVC insulation. It's sold without terminals, so the ends are bare and ready for whatever lugs your boat needs. If you're building cables to a specific length, that's exactly how you want it. Every boat runs its own routes, and a bare spool lets you cut each cable to fit instead of coiling up a few extra feet behind the panel.\u003c\/p\u003e\n\u003cp\u003eThe red jacket marks positive. That's the convention on boats, and it makes life easier for the next person who opens the battery compartment, whether that's you next season or a tech doing a survey. Pair it with a black spool for the negative side and you've got a clean, easy-to-read system from the battery switch all the way to the loads.\u003c\/p\u003e\n\u003cp\u003eTinned copper is the real reason to buy marine cable instead of grabbing something from a hardware aisle. Every strand carries a thin coat of tin, and that coating fights the green corrosion that creeps along bare copper in salt air and bilge humidity. We've pulled apart old runs where the copper inside the jacket had turned to crust from the lug back several inches. Tinned strands hold up far better in that same spot. You still need to seal your terminations, but the cable itself is working with you.\u003c\/p\u003e\n\u003cp\u003e3\/0 is heavy gauge. It's the size you reach for on the big jobs, like engine starting circuits, battery to battery links, inverter feeds, and other long, high current runs where a thin cable would run warm and drop voltage. The title lists this as a 600 volt rated auxiliary wire, and the cable is UL, CSA, ABYC and US Coast Guard certified, which is what you want to see on anything that runs through a hull. Always size your cable and your fuse or breaker to the load and the run length on your boat, and check the manufacturer's ampacity tables before you cut anything.\u003c\/p\u003e\n\u003cp\u003eWorking with 3\/0 takes some muscle and the right tools. You'll want a proper hydraulic or heavy hammer style crimper and lugs sized for 3\/0, not a bargain pair of pliers. Strip the jacket cleanly without nicking strands, slide on adhesive lined heat shrink before you crimp, then seal it down over the barrel afterward. A good crimp on tinned cable will outlast the boat. A sloppy one will show up as a hot lug on a dark night. Ask us if you aren't sure which lugs match, and we'll point you to the right size.\u003c\/p\u003e\n\u003cp\u003eBecause the spool is 25 feet, it's a good fit for a few typical jobs. A pair of short battery interconnects on a twin battery bank. A single starter run on a mid-size inboard or sterndrive. A new feed to a windlass or inverter on a boat where the old cable has gone stiff and green. If your run is longer than 25 feet, or you need both positive and negative at the same length, plan on more than one spool and measure twice. It hurts to come up a foot short on a 3\/0 install.\u003c\/p\u003e\n\u003cp\u003eA few install habits will save you grief. Keep cable runs as short and direct as the boat allows. Support them every 18 inches or so and keep them out of bilge water. Use a grommet or chafe protection wherever the cable passes through a bulkhead. Put a fuse or breaker close to the battery on every positive feed, as your electrical plan calls for. And label both ends so you don't have to guess later.\u003c\/p\u003e\n\u003cp\u003eOne honest note. This listing is for the cable only. Terminals, lugs, heat shrink, and any crimping tools are sold separately. We don't list an outer jacket diameter or a strand count here because we won't guess at numbers we can't verify, so if you need those for a tight conduit or a specific lug, check the manufacturer's published data before you order.\u003c\/p\u003e\n\u003cp\u003eIf you want a cable you can trust on the boat for the long haul, this Ancor spool is a solid, no-nonsense pick. It's the right gauge for the heavy circuits, the red jacket keeps your positive side obvious, and the tinned copper gives you a real shot at staying clean and low resistance for years of salt and spray.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e3\/0 gauge tinned copper conductor, built for heavy current runs like starting circuits, bank links and inverter feeds\u003c\/li\u003e\n  \u003cli\u003eTinned strands resist the green corrosion that attacks bare copper in salt air and damp bilges\u003c\/li\u003e\n  \u003cli\u003eRed PVC insulation marks the positive side, so the next person in the battery box knows at a glance\u003c\/li\u003e\n  \u003cli\u003e25 foot spool, enough to cut several short interconnects or one long starter run\u003c\/li\u003e\n  \u003cli\u003eSold without terminals, so you cut each run to length and crimp the lugs your boat needs\u003c\/li\u003e\n  \u003cli\u003eRated for 600 volts\u003c\/li\u003e\n  \u003cli\u003eUL, CSA, ABYC and US Coast Guard certified for marine installs\u003c\/li\u003e\n  \u003cli\u003eListed by the distributor as tinned copper battery cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Ancor reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat gauge is this Ancor cable?\u003c\/summary\u003e\n    \u003cp\u003eIt's 3\/0 gauge, a heavy size meant for high current runs on the boat.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the cable tinned copper?\u003c\/summary\u003e\n    \u003cp\u003eYes. The conductor is tinned copper with PVC insulation. The tin coating helps the strands resist corrosion in salt air and damp spaces.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long is the spool?\u003c\/summary\u003e\n    \u003cp\u003eThe spool holds 25 feet of cable.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with terminals or lugs?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's sold without terminals, so the ends are bare. Lugs, heat shrink and crimping tools are sold separately.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this the positive or negative cable?\u003c\/summary\u003e\n    \u003cp\u003eThe insulation is red, which is the standard color for positive. If you need the negative side, you'd want a black spool.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the voltage rating?\u003c\/summary\u003e\n    \u003cp\u003eThe listing gives a 600 volt rating.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it marine certified?\u003c\/summary\u003e\n    \u003cp\u003eYes. The listing shows UL, CSA, ABYC and US Coast Guard certification.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it for an engine starting circuit?\u003c\/summary\u003e\n    \u003cp\u003e3\/0 is a common size for starting circuits and battery links, but the right size depends on your engine and your run length. Check the engine maker's recommendation and the ampacity tables before you buy.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat do I need to terminate it?\u003c\/summary\u003e\n    \u003cp\u003eYou'll want 3\/0 lugs, a crimper rated for that size, and adhesive lined heat shrink to seal each end. Match the lug stud hole to the post or bus bar you're connecting to.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo you list the outer diameter or strand count?\u003c\/summary\u003e\n    \u003cp\u003eNo. Those numbers aren't in the data we have, so we don't state them. Check the manufacturer's published specs if you need them for conduit or lug fit.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eWithout Terminal, Red Positive, Tinned Copper Conductor\/PVC Insulation, 25 Foot Spool, 3\/0 Gauge Auxiliary Wire, 600 Volts, UL\/CSA\/ABYC\/US Coast Guard Certified\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eAncor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e118502\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e091887118087\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eTinned Copper Battery Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWire Gauge\u003c\/th\u003e\n\u003ctd\u003e3\/0 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConductor\u003c\/th\u003e\n\u003ctd\u003eTinned Copper\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003ePVC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInsulation Color\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePolarity\u003c\/th\u003e\n\u003ctd\u003ePositive\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 Feet\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eSpool\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTerminals\u003c\/th\u003e\n\u003ctd\u003eWithout Terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage Rating\u003c\/th\u003e\n\u003ctd\u003e600 Volts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eUL, CSA, ABYC, US Coast Guard\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What gauge is this Ancor cable?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's 3\/0 gauge, a heavy size meant for high current runs on the boat.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the cable tinned copper?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The conductor is tinned copper with PVC insulation. The tin coating helps the strands resist corrosion in salt air and damp spaces.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long is the spool?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The spool holds 25 feet of cable.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with terminals or lugs?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's sold without terminals, so the ends are bare. Lugs, heat shrink and crimping tools are sold separately.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this the positive or negative cable?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The insulation is red, which is the standard color for positive. If you need the negative side, you'd want a black spool.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the voltage rating?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The listing gives a 600 volt rating.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it marine certified?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The listing shows UL, CSA, ABYC and US Coast Guard certification.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it for an engine starting circuit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"3\/0 is a common size for starting circuits and battery links, but the right size depends on your engine and your run length. Check the engine maker's recommendation and the ampacity tables before you buy.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What do I need to terminate it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You'll want 3\/0 lugs, a crimper rated for that size, and adhesive lined heat shrink to seal each end. Match the lug stud hole to the post or bus bar you're connecting to.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do you list the outer diameter or strand count?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. Those numbers aren't in the data we have, so we don't state them. Check the manufacturer's published specs if you need them for conduit or lug fit.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Ancor","offers":[{"title":"Default Title","offer_id":68056099618909,"sku":"2011611","price":334.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_6e78c662-905b-4e56-b122-414cfbd5038b.jpg?v=1795018151","url":"https:\/\/nvnmarine.com\/products\/ancor-118502-3-0-battery-cable-red-25-ft","provider":"NVN Marine","version":"1.0","type":"link"}