Airmar

Airmar B164 Bronze Thru-Hull, 50/200 kHz, 20° Tilt

SKU: 113443 · UPC: 801769005110 · MPN: B164-20-MM
★★★★★ 4.7 · 0 reviews
Authorized dealer Free Shipping
$1,301.99
or 4 payments of $325.49 with Affirm · See disclosures
Low stock — 2 left — Ships today Pickup Monday · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$1,301.99
02 · Overview

Airmar B164 Bronze Thru-Hull, 50/200 kHz, 20° Tilt — Product description

The Airmar B164-20-MM is a 1 kW, 50/200 kHz bronze thru-hull transducer with a 20° tilted element for hulls with 16° to 24° of deadrise. It sits flush, so trailered boats can rest on rollers and bunks. You'll need a Mix & Match cable to connect it to your display.

If you've got a fast, trailered center console and no room for a fairing, the Airmar B164 bronze thru-hull is the transducer you've been looking for. It's a 1 kW, dual-frequency depth and temperature sensor with the ceramic elements tilted inside the housing. That tilt is what matters. On a deep-V hull the stock flush mount would shoot its beam off at an angle, and you'd lose the bottom the moment you pick up speed. The 20° tilted element puts the beam straight down so the energy lands right below the boat where you need it.

This is the 20° version, built for hulls with 16° to 24° of deadrise. That covers a lot of the offshore-style center consoles, bay boats and sportfishers you see on trailers every weekend. If your boat sits flatter, there's a 12° version in the same B164 family for shallower deadrise angles, so check your hull before you order. Not sure of the number? Measure it at the transom or ask the builder. Guessing here costs you a haul-out later.

The housing is bronze and it sits flush. It extends less than 6.35 mm (1/4 inch) below the hull, which means the boat can still rest on trailer rollers and bunks without crushing the transducer. That's the whole point of a flush-mount design. You get thru-hull performance without the drag, and it has no effect on how the boat runs. Because the housing is bronze, it's meant for fiberglass or wood hulls only. Planning a metal hull? Airmar makes a stainless steel version, the SS164, for use in all hull materials.

Two frequencies give you two jobs. The 50 kHz element has a wide 22° beamwidth and reads to 549 m (1800 feet), so it's the one you lean on when you're running offshore and want to see deep structure and the bottom contour. The 200 kHz element tightens up to a 6° beam and reads to 244 m (800 feet), which gives you sharper detail on bait, fish and the bottom in the water you'll fish most. Both are rated at 1 kW, and the transducer also includes fast-response water temperature sensing. Handy when you're hunting a temperature break.

A few things to know before you buy. This transducer is a conventional dual-frequency unit, not CHIRP, and it doesn't include speed sensing. It's rated for vessels up to about 11 m (36 feet) and it interfaces with any 600 W or 1 kW echo sounder that supports the Airmar 9-pin Mix & Match series. And that brings up the cable. The transducer has a 2 m (6.5 foot) cable ending in the Airmar 9-pin MM1 connector, but you'll need a Mix & Match cable to connect it to your display. That cable is not included. Pick the one that matches your sounder, and we're happy to help you sort that out.

Installation is a standard thru-hull job. You'll need a 95 mm (3-3/4 inch) hole, and the usable shaft length is 71 mm (2.80 inches), so check your hull thickness and the inside clearance before you cut. Take your time on bedding and sealing, and keep the transducer away from turbulence, strakes and through-hull fittings upstream of it. A clean water flow over the face is what gives you a clean picture at speed. The Xducer ID technology stores the transducer's calibration data so a compatible display can read it automatically. That's one less thing to set up by hand.

Built in the USA with a urethane acoustic window, the B164 is a serious piece of gear for anglers who run hard and need their bottom reading to hold together. It isn't the right pick for a retractable or trolling setup, since the housing isn't retractable. But for a trailered, planing hull where the depth finder has to keep up with you, it does the job well. If you've got questions about fit, deadrise or which Mix & Match cable to grab, ask the crew. We'd rather get it right the first time.

Key Features

  • 20° tilted element aims the beam straight down on hulls with 16° to 24° of deadrise, so you keep the bottom at speed.
  • 1 kW dual-frequency (50/200 kHz) gives you deep-water reach and sharp detail from one transducer.
  • 50 kHz with a wide 22° beam reads to 549 m (1800') for offshore depth performance.
  • 200 kHz with a narrow 6° beam reads to 244 m (800') for tighter detail on fish and bottom.
  • Flush-mount bronze housing extends less than 6.35 mm (1/4") below the hull, so it clears trailer rollers and bunks.
  • No fairing needed, and no effect on the boat's running performance.
  • Fast-response water temperature sensing is built in.
  • Fits fiberglass or wood hulls on boats up to 11 m (36').
  • Airmar 9-pin (MM1) connector with a 2 m (6.5') cable. Mix & Match cable required and sold separately.
  • Xducer ID technology lets compatible displays read the transducer's calibration data automatically.
  • Interfaces with 600 W or 1 kW echo sounders in the 9-pin 1000 Watt Mix & Match series.
  • Made in the USA with a urethane acoustic window.

Why Buy from NVN Marine

  • Authorized Airmar reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Monday) $1,301.99
03 · The numbers

Technical specifications

Title Airmar B164 Bronze Thru-Hull - 50/200 kHz - 1 kW - 20° Tilted Element - Requires Mix & Match Cable
Brand Airmar
Manufacturer Part Number B164-20-MM
UPC 801769005110
Frequency Band 50/200 kHz
Power Rating 1 kW
Single or Dual Frequency Conventional Dual Frequency
Conventional Beam 22°x20°/6°
Max Depth Low frequency 549 m (1800'), High frequency 244 m (800')
Functions Depth, Temperature
Tilt Angle 20°
Tilted Element Yes
Deadrise Range 16° to 24°
Mounting Style Tilted Element Thru-Hull
Material Bronze
Acoustic Window Urethane
Hull Material Fiberglass or wood
Max Vessel LOA Up to 11 m (36')
Hole Size 95 mm (3-3/4")
Usable Shaft Length 71 mm (2.80")
Retractable Housing No
Cable Length 2 m (6.5')
Sensor Connector Airmar 9-Pin (MM1)
Mix and Match Series 9-Pin 1000 Watt
Display Connector Cable Required
Weight 2.7 kg (6 lbs)
Package Dimensions (L x W x H) 11.50 x 11.00 x 8.00 in
Country of Origin USA
04 · Before you buy

Frequently asked questions

What deadrise angle is the B164-20-MM made for?

The 20° tilted element is built for hulls with 16° to 24° of deadrise. If your boat has a shallower deadrise, a 12° version exists in the same B164 family for 8° to 15° hulls.

Does this transducer come with the cable for my display?

No. The transducer has a 2 m (6.5 foot) cable with an Airmar 9-pin (MM1) connector, but you need a separate Mix & Match cable to connect it to your sounder. It's sold separately.

What frequencies does it run?

It's a conventional dual-frequency transducer running 50 kHz and 200 kHz at 1 kW. The 50 kHz element has a 22° beamwidth and the 200 kHz element has a 6° beamwidth.

How deep can it read?

Airmar rates depth performance to 549 m (1800 feet) on the low frequency and 244 m (800 feet) on the high frequency. Actual results depend on your sounder, water conditions and installation.

Can I install it in an aluminum or steel hull?

No. This bronze housing is intended for fiberglass or wood hulls. Airmar offers a stainless steel version, the SS164, for use in all hull materials.

Will it work on a trailered boat?

Yes, that's what it's designed for. The housing extends less than 6.35 mm (1/4 inch) below the hull, so the boat can sit on trailer rollers and bunks.

Does it measure water temperature?

Yes. It does depth and fast-response water temperature sensing. It doesn't include speed sensing.

What size hole do I need to cut?

The hole size is 95 mm (3-3/4 inches), and the usable shaft length is 71 mm (2.80 inches). Check your hull thickness and inside clearance before you cut.

Is it a CHIRP transducer?

No. It's a conventional dual-frequency transducer, not CHIRP.

How big a boat is it meant for?

Airmar lists it for vessels up to 11 m (36 feet). It suits center consoles and other trailered boats that can't take a fairing.

Is the housing retractable?

No. It's a fixed, flush-mounted thru-hull transducer.

05 · Customer voices

Customer reviews