Victron Galvanic Isolator VDI-32A 32A Max Waterproof (Potted)

Victron Galvanic Isolator VDI-32A 32A Max Waterproof (Potted) Product Description

The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.

The isolator is installed directly behind your boat's 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.

Galvonic Isolator VDI-32A 32A Max Waterproof (Potted)

The galvanic isolator prevents electrolytic corrosion. It blocks low voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft and so on.
The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.

The isolator is installed directly behind your boat's 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.

Terminal posts are 6mm (1.4")

This item is not ABYC A-28 approved

Please contact your dealer for any returns, repairs or support issues related to this product.

SmartSolar MPPT 100 Volt 20 A: The solar charger collects energy from the solar panel and stores it in the battery. SmartSolar uses the latest and fastest technology to maximize this energy. The SmartSolar charge controller can even charge batteries that are seriously depleted. Using the latest and fastest technology, SmartSolar can make maximum use of this energy, thereby intelligently driving it to fully charge in the shortest time. SmartSolar keeps the battery healthy and extends its life. The SmartSolar charge controller can even charge a severely depleted battery. As long as the battery is not permanently sulfated or otherwise damaged, it can operate at battery voltages as low as 0 volts.

Victron Galvanic Isolator VDI-32A 32A Max Waterproof (Potted) Related Products

Ancor Heavy Duty Lugs - 8 Gauge Wire - 1/4" Post - 2-Pack
Ancor Heavy Duty Lugs - 8 Gauge Wire - 1/4" Post - 25-Pack
Ancor Heavy Duty Lugs - 8 Gauge Wire - 1/4" Post - 100-Pack
Ancor Green 18 AWG Tinned Copper Wire - 100'
Ancor Green 18 AWG Tinned Copper Wire - 250'
Ancor Green 8 AWG Tinned Copper Wire - 25'




Save $43 when you buy the Victron Galvanic Isolator VDI-32A 32A Max Waterproof (Potted) for only $249 from NVN Marine! Same day shipping before 3pm.