Permatex High Strength Threadlocker RED Gel Tube - 6ml

Permatex High Strength Threadlocker RED Gel Tube - 6ml Product Description

OEM specified. High strength threadlocker for heavy-duty applications 3/8 Inch to 1 Inch (10 Millimeter to 25 Millimeter). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Locks against vibration loosening. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221 (Mil-S-46163A, Type 1, Grade K).

Permatex 27100 Attributes

• Function: Thread Locker And Sealant
• Fastener Type: 3/8 To 1 Inch Fasteners
• Strength: High Strength
• Disassembly: Disassembly Requires Heat And Hand Tools
• Type: Penetrating
• Color: Red
• Unit Size: 6 Milliliter
• Unit Type: Tube
• Unit Quantity: Single

Permatex 27100 Features & Benefits

• High Strength Anaerobic Threadlocking Material That Cures Between Engaged Threads To Form A Unitized Assembly That Resists Virtually All Leakage, Shock And Vibration
• A Single Component, Anaerobic Liquid That Cures When Confined In The Absence Of Air Between Close Fitting Metal Surfaces
• Ideal For All 1/4 Inch To 3/4 Inch Diameter Nut And Bolt Assemblies
• Excellent Chemical Resistance With A Temperature Resistance Range Of Minus 54 Degree Celsius To Plus 150 Degree Celsius (Minus 65 Degree Fahrenheit To Plus 300 Degree Fahrenheit)
• Prevents Rusting Of Threads
• Cures Without Cracking Or Shrinking
• No Mixing, No Curing Outside Of Joint And No Torque Compensation Required During Assembly
• No Supplier Warranty

Permatex 27100 Technical Bulletins

• 27100.pdf

High Strength Threadlocker RED Gel Tube - 6ml

OEM specified. High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221 (Mil-S- 46163A, Type I, Grade K). 

Applications:

Automobile - Suggested Applications: Headlight screws, console assemblies, soundproofing, attachment screws, electrical component boxes, plastic knobs, hose fasteners, dashboard accessories, etc.

Motorcycle - Suggested Applications: All engine mounting bolts

Heavy Duty - Suggested Applications: Air starter fasteners, suspension fasteners, shock absorber mounts, wheel studs, exhaust system mounts, bumper fasteners

Marine - Suggested Applications: Cylinder block studs, ring gear bolts, frame bolts, shock bolts

Directions:

1. Clean and dry parts using Permatex® Surface Prep™ activator, Item# 24163
2. Shake tube ofHigh Strength Threadlocker well before each use.
3. Remove cap and snip nozzle tip.
4. Apply to threadedareas and assemble parts. Refer to Technical Data Sheet for complete information.

NOTE: Threadlocker works on metal parts. It is not recommended for plastics. Cured product must be heatedto 500°F (260°C) before parts will separate.