Permatex Ultra Black® Maximum Oil Resistance RTV Silicone Gasket Maker - 13oz

Permatex Ultra Black® Maximum Oil Resistance RTV Silicone Gasket Maker - 13oz Product Description

OEM specified. For dealership warranty requirements, Ultra Black® ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through use of a patented adhesion system. Temperature range -65 Degree Fahrenheit to 500 Degree Fahrenheit (-54 Degree Celsius to 260 Degree Celsius) intermittent; resists auto and shop fluids and vibration.

Permatex 24105 Attributes

• Unit Size: 13 Ounce
• Unit Type: Cartridge
• Unit Quantity: Single

Permatex 24105 Features & Benefits

• Sensor Safe, Low Odor, Noncorrosive
• Fast Curing Formula
• Resists Auto And Shop Fluids And Vibration
• Meets Performance Specs Of OE Silicone Gaskets
• Retains High Flexibility, Oil Resistant Properties Through Use Of A Patented Adhesion System
• No Supplier Warranty

Permatex 24105 Technical Bulletins

• 24105 (1).pdf
• 24105.pdf

Ultra Black® Maximum Oil Resistance RTV Silicone Gasket Maker - 13oz

OEM specified. For dealership warranty requirements, Ultra Black® ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through use of a patented adhesion system. Temperature range -65°F to 500°F (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration.

Applications:

• Automobile - Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, differential covers
• Marine - Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings

Directions:

1. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake & Parts Cleaner.
2. Cut nozzle to desired bead size – gaskets are best formed using a 1/16" to 1/4" bead.
3. Apply a continuous and even bead of silicone to one surface, surrounding all bolt holes. Remove excess with knife at once. Assemble parts immediately. Do not squeeze out silicone by over tightening bolts. Re-torque will not be necessary.
4. Silicone dries in 1 hour, and fully cures in 24 hours, at 70% – 50% relative humidity. Allow more time in cold weather.
5. Replace cap after use. Clean hands with dry cloth or Permatex® Fast Orange® Hand Cleaner. Clean tools with non-flammable cleaning fluid.

NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.