Victron Lynx Distributor

Victron Lynx Distributor Product Description

A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system.

Lynx Distributor

A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system.  

Contains a positive and negative bus-bar and provides a connection for 4 individual DC equipment circuits, loads or DC groups. It has a space for individual DC fuses per DC group.  There is an optional feature of an LED for each fuse to indicate if fuse is blown.

If you wish to use the fuse indication LEDs on the Lynx Distributor, it also requires a connection to a Lynx Shunt. The Lynx Shunt contains the necessary wide input (8 to 70VDC) power supply to output the required 5V (4,5V-5,5V) power requirement of the Lynx Distributor circuit board.

RJ11 fly leads are used to connect the Lynx Shunt to the Distributor. This RJ11 cable is supplied with the Distributor in the box. There are two ports on the Lynx Shunt, and it is possible to use either.

When all is OK, only the central LED is green; when a fuse has blown (or is missing) the central and blow fuse circuit LEDs turn red. If you are not using all connection points in your DC distribution, it may be necessary to fit dummy fuses to extinguish the red LEDs

Warranty Info

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Please contact your dealer for any returns, repairs or support issues related to this product.

Lynx power input The Lynx power input module is used to connect the battery through an external fuse. This is useful if you have multiple parallel strings. Since the short-circuit current potential of most battery packs is extremely high, it is recommended to use an external fuse system with appropriate fault current interruption ratings (such as NH HRC). Power In includes a negative and positive DC bus with M8 bolts for connecting battery cables. It can accommodate cables with a diameter of up to 22 mm through the bottom entry guide, and there is no restriction by connecting on both sides.

Victron Lynx Distributor Related Products

Victron Battery Monitor - BMV-702 - Black
Victron Smart Battery Monitor - BMV-712 - Grey - Bluetooth Capable
Victron Battery Monitor - BMV-702 - Grey
Victron Modular Fuse Holder f/MEGA Fuse
Victron Busbar to Connect 6 Modular Holders
Victron MEGA Fuse - 200AMP - 32V (Package of 5 Pieces)
Victron MEGA Fuse - 250AMP - 32V (Package of 5 Pieces)
Victron MEGA Fuse - 400AMP - 32V (Package of 5 Pieces)
Victron Holder MEGA Fuse
Victron MEGA Fuse 300AMP - 32V (Package of 5 Pieces)




Save $35 when you buy the Victron Lynx Distributor for only $201 from NVN Marine! Same day shipping before 3pm.