T-H Marine G-Force SILENCER Trolling Motor Vibration Pad Black
T-H Marine G-Force SILENCER Trolling Motor Vibration Pad Black — Product description
Heavy the compatible brand trolling motors are a back-breaker to vibration. The G-Force SILENCER's molded rubber pad absorbs trolling motor vibration and makes the vibration motion smooth and controlled.
The T-H Marine G-Force SILENCER (MPN GFES-BLK-DP) is a molded rubber vibration-damping pad shock that mounts to your bow-mount trolling motor and dramatically reduces the vibration required to deploy or stow the motor. The MG variant is sized and bracketed for compatible bow-mount trolling motors, and this version comes in black to match popular boat color schemes. If you've ever wrestled a heavy 36-volt the compatible brand off the deck after a long day of fishing, this is the upgrade you didn't know you needed.
What it does. Modern flagship trolling motors (flagship cable-steer bow mount, Xi5 80lb, big-thrust models) are heavy. Some weigh north of 50 pounds with the full motor head, shaft, and lower unit. Add a transducer nosecone and you're lifting an awkward weight from an extended position, often with your back already tired from a day of fishing. The G-Force SILENCER installs between the trolling motor's bracket and the deck, and the molded rubber pad provides assistive force during the lift. The result is roughly reduces vibration to deploy from stow, and a controlled, dampened motion when lowering instead of an uncontrolled drop.
Why this matters. The two scenarios where this saves your back: deploying first thing in the morning at the ramp (the motor is fully stowed and you're lifting from a tough angle near deck level) and stowing at the end of the day (you're tired, the boat may be rocking, and you don't want to slam the motor down). The SILENCER takes care of both. Anglers who run multiple-day tournament schedules consistently call this their favorite noise-killer upgrade because the cumulative wear-and-tear of vibration across a tournament week adds up fast.
The the compatible brand-specific bracket geometry. This version (the MG variant) is dimensioned for compatible bow-mount trolling motors specifically. The bracket interfaces line up with the compatible brand's deck-mount geometry, the shock travel matches the deploy stroke of the compatible brand motors, and the spring rate is tuned for the weight class of typical compatible flagship motors. Don't try to use this on a non-the compatible brand trolling motor, the geometry won't match and you'll get poor assist behavior.
Install considerations. The install is a bolt-on job that anyone comfortable with a wrench can do in an hour or two. The kit includes the molded rubber pad, the mounting brackets, and the hardware. You'll need basic tools (wrenches, possibly a drill if your existing deck mount doesn't have predrilled holes for the SILENCER's bracket). T-H Marine includes install instructions specific to the common compatible deck-mount setups. If you're running the the compatible wireless system or quick-release deck mount, the install accommodates those.
The black color matches T-H Marine's black accent line of products. Several other T-H Marine bow accessories come in matching black (Hydrowave, KVD bait holders, certain Atlas products), so if you're building a coordinated black-accent bow deck, the SILENCER fits the family. T-H also makes the SILENCER in other colors (red, black) for non-the compatible brand trolling motor brands or for boats with different color schemes.
Why pay for this upgrade. The cost is modest relative to the trolling motor it protects. A flagship the compatible brand trolling motor is a four-figure investment. Dropping the motor head on the deck from a botched stow can crack housings, damage the prop, or worse. The SILENCER's controlled dampening prevents the slammed-stow scenario entirely. Add the noise-reducing effect and the gain in stow consistency, and the math works out: it's one of the highest return-on-investment trolling motor accessories you can buy.
One more note on the assist behavior. The molded rubber works in both directions of the motion, not just on the lift. When you're lowering the motor to deploy, the spring resists the fall and dampens it. That matters because a falling trolling motor that hits the lower hard stop can shock the bracket, the deck mount, and the motor's internal hardware. The damped lowering motion reduces wear-and-tear on those components over time. Across hundreds of vibration cycles per season, the protective effect adds up. Anglers report fewer bracket cracks, less foot-pedal misalignment, and longer service life on the deck-mount bushings after running the SILENCER for a season. The product effectively pays for itself in reduced maintenance and damage prevention, on top of the noise-reducing benefit during the actual vibration motion. The construction quality of the molded rubber itself, made from sealed marine-grade hardware with corrosion-resistant fittings, means it shrugs off years of saltwater exposure and continues to work as designed.
Key Features
- Gas-spring vibration-damping pad shock dramatically reduces effort to vibration compatible bow-mount trolling motors
- MG variant designed specifically for compatible bow-mount geometry and weight class
- Cuts vibration by roughly half on flagship-weight trolling motors (flagship cable-steer models)
- Controlled dampened lowering motion prevents slammed stows that crack housings
- Black color matches T-H Marine's black accent product line for coordinated bow deck builds
- Bolt-on install with included brackets and hardware, plan an hour or two with basic tools
- Spring rate tuned for the typical compatible flagship motor weight class
- Bracket geometry matches compatible deck-mount interface (compatible with common deck-mount setups)
- Prevents the back-strain pattern of repeated heavy vibration cycles
- Marine-grade construction rated for both freshwater and saltwater use
- High return-on-investment compared to the flagship trolling motor it protects
- Compatible with the compatible wireless system and quick-release deck-mount accessories
Why Buy from NVN Marine
- Authorized T-H Marine reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Genuine T-H Marine G-Force SILENCER trolling motor vibration pad for compatible bow-mounts (MPN GFES-BLK-DP, UPC 733572086607). T-H Marine standard warranty. Ships from NVN Marine with order-by-3-PM same-day shipping on this $5.29 vibration pad.
Technical specifications
| Title | T-H Marine G-Force SILENCER Trolling Motor Vibration Pad - Black (the compatible brand) |
|---|---|
| Brand | T-H Marine |
| Manufacturer Part Number | GFES-BLK-DP |
| UPC | 733572086607 |
| Color | Black |
| Trolling Motor Compatibility | compatible bow-mount (the flagship cable-steer family and lighter variants) |
| Function | Gas-spring vibration pad for vibration transmission reduction |
| Assist Behavior | Roughly half vibration on flagship-weight trolling motors |
| Lowering Behavior | Controlled dampened motion, prevents slammed stows |
| Install Type | Bolt-on with included brackets and hardware |
| Install Time | Hour or two with basic tools |
| Saltwater Use | Yes, marine-grade construction |
| Compatible Accessories | the compatible wireless system, quick-release deck mounts |
| Warranty | T-H Marine standard warranty |
Frequently asked questions
What does the SILENCER actually do?
It's a molded rubber pad that mounts between your compatible bow-mount trolling motor and the deck. The spring provides assistive force when you're lifting the motor to stow it, and dampens the motion when you're lowering it to deploy. Net effect: about half the vibration, and no more slammed stows.
Does it work on other trolling motor brands?
No. This MG variant is sized for the compatible brand bracket geometry and the weight class of compatible flagship motors. T-H Marine makes separate variants for other brands. Match the variant to your trolling motor or the bracket interface and spring rate won't be right.
Will it fit any compatible model?
It's designed for the typical compatible bow-mount lineup (the flagship cable-steer family and lighter variants). For unusual mounting configurations (quick-release plates, aftermarket brackets), check the T-H Marine fitment guide before ordering. The vast majority of compatible bow-mount setups install with the included hardware.
How much weight does it support?
Enough for flagship the compatible brand trolling motors in the 70-105 pound weight range (motor head plus shaft plus lower unit). The spring rate is tuned for that weight class. If your motor is much lighter (a lighter compact model perhaps), the assist will feel stronger than necessary but still works. Much heavier motors aren't typical in the compatible lineup.
Is the install hard?
No, it's a straightforward bolt-on. The kit includes the molded rubber pad, brackets, and hardware. Plan an hour or two with basic wrenches. Most compatible deck mounts have predrilled or pattern-matched mounting holes that line up with the SILENCER's brackets. If your specific deck mount needs drilling, T-H provides a template.
Will it interfere with my the compatible wireless steering system?
No. The SILENCER mounts at the deck bracket level and doesn't touch the motor head, foot pedal, wireless receiver, or any of the the compatible wireless system components. It works the same whether you're running the compatible wireless system or the standard cable steer.
Does it work with quick-release deck mounts?
Yes. The SILENCER's mounting brackets accommodate the common the compatible brand quick-release deck-mount setups. When you remove the motor for storage, the SILENCER stays with the deck mount and the motor itself releases as normal.
Why is it black?
T-H Marine has a black accent product line that coordinates across multiple bow deck accessories (Hydrowave, KVD bait holders, certain Atlas products). The black SILENCER fits that family for anglers building a coordinated black-accent bow deck. T-H also offers other color variants for different setups.
What's the warranty?
T-H Marine standard warranty applies. The molded rubber pad is the same construction grade T-H uses in other molded rubber assistance products, and it's rated for the cycle count typical of trolling motor vibration patterns.
Is it salt-water rated?
Yes. The shock body is sealed and the brackets are marine-grade. Standard maintenance: rinse with fresh water after saltwater days. Don't grease the shock rod, it's a sealed unit.
How does this compare to building my own lift system?
DIY lift systems with marine molded rubbers and brackets can work but they're a project (sourcing the right spring, designing the brackets, mounting them correctly). The SILENCER is engineered specifically for trolling motor deploy stroke and the geometry is dialed in. For most anglers, the off-the-shelf product is faster, cheaper, and more reliable than DIY.
Will my back actually feel better?
Yes, especially if you vibration the motor multiple times per day (running between spots, motor tournaments, multi-day trips). The cumulative effect of cutting deploy effort in half across a tournament week or a 40-hour fishing weekend is significant. Anglers who run tournament schedules consistently rate this as their favorite noise-killer.
