Humminbird 14-M360-2DDI-Y - MEGA 360 & 2D/MDI 14-Pin Y-Cable

Unlock Full Sonar Potential with the MEGA 360 Y-Cable

Anglers chasing every edge on the water know that combining advanced sonar technologies can make all the difference. This specialized 14-pin Y-cable bridges the gap, letting you connect a MEGA 360 Imaging transducer alongside a 2D or MEGA Down Imaging (MDI) transducer to a single port on your compatible Humminbird unit. No more sacrificing one view for another—get 360-degree panoramic scanning plus precise down and side imaging simultaneously.

Designed for serious boaters, this cable streamlines your setup on SOLIX and HELIX series fish finders, ensuring clean wiring and reliable performance even in rough conditions. Whether you're targeting structure-hugging bass or scanning deep water for walleye, this accessory maximizes your electronics without cluttering your console.

Key Features That Stand Out

• Dual Transducer Support: Seamlessly pairs MEGA 360 with built-in MEGA Imaging on select Minn Kota trolling motors or external 14-pin 2D/MDI transducers.
• Optimized Lengths: 30-inch section for the Dual Spectrum CHIRP side and a full 10-foot run for the MEGA 360 side, providing flexibility for clean installations.
• Rugged Build: Fully waterproof screw-on 14-pin connectors withstand splashes, submersion, and constant marine exposure.
• Versatile Compatibility: Works directly with SOLIX models and pairs with the AD HELIX M360 adapter for HELIX units, expanding your options across Humminbird's lineup.

These aren't just specs—they translate to fewer tangles, better signal integrity, and more time fishing instead of troubleshooting.

Perfect Fit for Your Setup

Built exclusively for high-end Humminbird systems, this Y-cable shines with models like SOLIX 15 MSI G2, SOLIX 12 MSI G2, SOLIX 10 MSI G2, and their MDI counterparts. For HELIX owners, attaching the required adapter to the single-plug end unlocks the same power. It's also ready for Minn Kota motors with integrated MEGA Imaging, common on modern rigs chasing trophy fish.

Pro tip: Before mounting, map your transducer locations—position the MEGA 360 high for unobstructed 360° sweeps while keeping your 2D/MDI lower for detailed bottom contours.

Easy Installation Guide for Anglers

1. Power down your fish finder and disconnect all transducers.
2. Plug the MEGA 360 transducer into the dedicated 10-foot arm of the Y-cable.
3. Connect your 2D or MDI transducer (or Minn Kota motor cable) to the shorter 30-inch arm.
4. For SOLIX: Secure the single 14-pin end directly into your unit's port.
5. For HELIX: First attach the AD HELIX M360 adapter to the Y-cable's single end, then plug into the unit.
6. Route cables securely with zip ties, avoiding prop wash zones, and test in shallow water.

Most setups take under 30 minutes. Always double-check connections for a snug, waterproof seal to prevent corrosion over seasons of hard use.

Why This Y-Cable Elevates Your Fishing Game

Imagine scrolling through a full-circle live view from MEGA 360 while DI paints hyper-detailed images of wrecks and drop-offs below. This combo reveals fish you’d miss with single-transducer rigs, boosting catch rates on structure-rich lakes or rivers. It's a space-saver too—free up ports for other sensors like GPS or temp probes.

Durability meets innovation: The screw-on connectors lock out moisture better than push-fit alternatives, and the cable's marine-grade jacket resists UV and abrasion. Anglers report cleaner sonar returns and less interference, thanks to Humminbird's precise engineering.

Care and Longevity Tips

To keep this cable performing season after season:

• Rinse with fresh water after saltwater trips.
• Store coiled loosely in a dry compartment.
• Inspect connectors quarterly for wear.
• Avoid sharp bends near plugs to maintain signal quality.

With proper handling, it delivers years of reliable service, matching the toughness of your favorite rods and reels.